Used Plasma Torch for sale (796)

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs. Bedpotp Dhpofx Aa Uecw  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Bcsdpfxovpalao Aa Ujw ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: ready for operation (used), Year of construction: 2017, This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. Bsdpfx Aasx S Skfe Uscw Application Types Cutting

Condition: used, Tepla Tepla 400 SC 230 Volt 13A 50/60Hz Pressure: 4-6 bar Scope of delivery: (see pictures) Bedpfx Aaeu T Egfe Uecw We will be happy to answer any further questions you may have over the phone. Written order possible by email or fax

Condition: new, A collection of three of the most advanced CNC plasma cutting machines. Thanks to the user-friendly software, the Swift-Cut-Pro range promises precise cutting at the highest speed with a low investment. The Swift-Cut-Pro range is easy to use, quick to learn and superbly supported by exceptional after-sales service. The Swift Cut Pro range is the solution for affordable in-house metal cutting. Bedpfx Aegkgugea Uocw Please feel free to schedule a demonstration appointment with us.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, For sale is a Zinser CNC plasma cutting machine with Hypertherm HBR 130 xd power source and accessories. Bjdpfxexpwzuo Aa Ujcw The system is equipped with an angular head and consists of both a flatbed and a tube processing unit.

Condition: good (used), Plasma cutter, plasma cutter -Equipment: without hose package -Cooling: Water-cooled -Max. cutting current: 70 A -Mains voltage: 3x400V Bjdpfx Aaob A Inne Uocw

Condition: like new (used), Year of construction: 1991, machine/vehicle number: 176063, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps Bcodpfsvfmiwex Aa Usw 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, track width: 3,000 mm, working range: 6,000 mm, total width: 3,800 mm, total length: 11,000 mm, product height (max.): 70 mm, cutting height (max.): 60 mm, Lind plasma cutting system with HiFocus 360I Hypertherm cutting unit incl. KWE 360, PGV 3. Cutting table with complete extraction system. The plant is fully operational and in excellent condition. Demonstration possible. Original price €190,000.00. The plant is immediately available. The price is valid for purchase decisions made by the end of November!! Dismantling possible in January 2026. Bcjdpewmq Tzofx Aa Uow

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 2,200 kg, input voltage: 400 V, total width: 3,000 mm, total height: 1,800 mm, total length: 4,300 mm, workpiece weight (max.): 1,000 kg, power of the servo motor: 750 W, working width: 1,550 mm, positioning speed: 50 m/min, table width: 1,550 mm, cutting current: 100 A, warranty duration: 24 months, working length: 3,050 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 150 mm, Kompakt plasma cutter manufactured in Poland! Brand new machine, lead time from 8 to 12 weeks. Key features: - robust mechanics based on a welded and stress-relieved frame, - hardened helical rack gears, - fume extraction flap control system for enhanced extraction efficiency, - drawers for small parts and for easy cleaning of the combustion chamber, Bcsdpfx Aajykpp Is Uow - one of the fastest machines on the market – 50 m/min, - ThermaCut EX-TRAFIRE 100SD plasma unit, - intuitive, straightforward controls, - fume extraction fan. Alternative configurations possible: - change of working area - use of a different plasma unit

Condition: good (used), overall weight: 2,400 kg, OXIPLASMA Kompak EKO 3100x1600mm Plasma Cutting Table Brand: OXIPLASMA Model: Kompak EKO 316 Manufactured: 2018 (Installed at client for operation in 2021) Description: Useful cutting capacities: 3,100x1,600mm Travel speed: 30 m/min Positioning accuracy: +/- 0.1 mm Motorization: Brushless servos (4 interpolated servo motors (x, y1, y2, z)) Double guidance and traction system Height control managed by the CNC Bsdpfx Aswlrukea Uscw Anti-collision detector with inductive electromechanical impact control Suction table sectioned by zones using the CNC Hypertherm EDGE CONNECT CNC 19" touchscreen Useful head lift: 120 mm Weight: 2,400 kg Cutting capacity: Carbon steel: 32 mm Stainless steel: 20 mm Includes: - Hypertherm HPR 130 XD high-definition plasma equipment - Hypertherm gas console - ROLLAIR RLR 700 screw air compressor, 7.5 HP, year 2007, 10 Bar 5,402 hours - BEKO DryPoint RA air dryer

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available Bcjdpox Hfdzsfx Aa Uow -Price: per piece -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.

Condition: good (used), Flame cutting machine, torch, oxy-fuel cutting machine Bodsn D Uq Sspfx Aa Uocw -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2 kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable -Dimensions: 460/210/230 mm Bcsdpfx Aajfdb Uqj Uew -Weight: 7.6 kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor Bsdsw H Aczopfx Aa Uocw -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable -Dimensions: 500/710/H340 mm -Weight: 23 kg

Year of construction: 1986, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor Bcjdpfjfc R Dwox Aa Uow -Oxyfuel cutting system: Oxyfuel cutting machine Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W -Dimensions: 580/370/H280 mm -Weight: 17.5 kg

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg Bedpfox Eipvjx Aa Uecw

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm Bsdpfx Aou Nwfuoa Ujcw burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: used, Year of construction: 1996, Technical details: cutting range for steel to: 25 mm Ampere: 2 x 120 A ( 2 verfügbar) Plasma cutting system with possible welding processes: - Plasma cutting, flame gouging; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals as well as arc welding Bjdju Nwxnopfx Aa Uecw Description: - Power source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) multiple frequencies 50/60Hz ( 2 pcs available price per piece) - Torch: CPM 250 (flat electrode) 1 pc available i.D. *

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m Bjdpfx Aaou R A Dle Uecw dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: new, functionality: fully functional, overall weight: 1,000 kg, Year of construction: 2026, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, controller manufacturer: CSMIO, controller model: IPM, sheet thickness steel (max.): 20 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 20 mm, actuation type: electric, CNC controlled plasma cutting system with water table 3000x1500mm, comprising: - Operator terminal - machine control / SimCNC - nesting and G-code generation / i3 Nest - drawing software / i3 CAD - Parametric standard components / i3 Macro - repair tool / DXF / i3 DXF Cleaner - WIN 11 PRO - Processor / i7 / 3.8 GHz - Memory / 16 GB RAM - Graphics / Radeon RX550/550 Series - Hard drive / 1TB Samsung SSD 980 M.2 - Mainboard / WIFI - 24" monitor - USB 3.0 / data transfer Bsdpfx Aox Sdtfea Uscw - THC / automatic height control - Collision protection sensors - Ohmic and floating touch sensing - engraving unit / FESTO pneumatics - workspace monitoring - Servo drives on all axes - Linear rail guides - Rack and pinion drive - Working area 3000x1500mm - Welded machine bed - Pipe cutting up to 120mm - Positioning aid / point laser - Plasma power source / Hypertherm SYNC 105A - Maintenance unit / dry and clean air

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. Bcsdpfx Aaowinpxo Usw The machine can be inspected under power in Vilnius.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, working range: 12,000 mm, sheet thickness (max.): 300 mm, sheet thickness steel (max.): 300 mm, sheet thickness aluminum (max.): 60 mm, cutting current: 300 A, warranty duration: 24 months, travel distance X-axis: 3,000 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 450 mm, type of cooling: water, One of the most advanced and efficient plasma cutting machines on the market! Thunder 3D is a plasma system capable of cutting and beveling steel plates, pipes, and profiles, as well as open sections such as H, L, C, and T beams. 100% MADE IN POLAND! Bodpfxoxw Ihhj Aa Uscw Travel speed up to 60 m/min! Working area: 3000x12000 mm (other options available from 1500 mm to over 30,000 mm) Compatible with Hypertherm and Kjellberg plasma units. Optional gas torch (propane, acetylene, natural gas). 3D bevel head with a rotation angle of at least: ±93° on the A axis and at least: ±50° on the B axis. Capable of cutting V, A, X, K, Y, and 2Y bevels. Access to Industry 4.0 application. For more detailed information, please contact us.

Condition: like new (used), Year of construction: 2021, operating hours: 64 h, functionality: fully functional, type of input current: three-phase, working range: 60 mm, sheet thickness (max.): 60 mm, overall weight: 7,000 kg, total width: 4,100 mm, total height: 2,500 mm, total length: 8,100 mm, Equipment: documentation/manual, Parameter Value Table length 8200 mm Table width 3500 mm Machine weight 3500 kg Cutting width 2200mm Cutting length 6400 mm Table height 750 mm Connection voltage 400V ±10% Frequency 50–60 Hz ±2% Power consumption 2000 VA Operating conditions -10°C to +45°C Y-axis drive system Bi-directional longitudinal dual drive X-axis drive system Bi-directional transversal drive Y-axis guide Rack and pinion X-axis guide Linear transverse guide Bsdpfjyn Imaox Aa Ujcw Visual warning devices Colored lamps Plasma power source Hypertherm XPR 170 (USA), cutting capacity 0.5–60 mm Control system HYPERTHERM EDGE CONNECT Software package CAD Software + HYPERTHERM PRONEST 2019 Nesting Exhaust system CNC-operated electro-pneumatic flaps Cutting table 2000 x 6000 Nominal power 50 kW, Nominal voltage 380/400 V Air pressure 8.5 bar Dimensions 8100 x 4100 x 2500 mm Weight 7000 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i Bcjdpfx Aajx I Ehps Ujw