Used Plasm Cutting for sale (14,600)

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Itjdjxciumopfx Achsk Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: new, Year of construction: 2025, BAYKAL Plasma Cutting Machine Systems, BPL H: Highly accurate and reliable performance with positioning speeds. Key Advantages of BAYKAL Plasma Cutting Machine Systems; BAYKAL Plasma cutting is comparatively cheap for medium thickness cuts. High-quality cutting for thicknesses up to fifty millimeters. Iodpfx Aor En Rischstk Maximum thickness of one hundred and fifty millimeters. Plasma cutting can be carried out on all conductive materials, in contrast to flame cutting which is only suitable for ferrous metals. When compared to flame cutting, plasma cutting has a significantly smaller cutting kerf. Plasma cutting is the most effective means of cutting medium thickness stainless steel and aluminum. Faster cutting speed than oxyfuel. CNC plasma cutting machines can offer excellent precision and repeatability. Plasma cutting can be carried out in the water which results in smaller heat-affected zones as well as minimizing noise levels. Plasma cutting can cut more complex shapes as it has high levels of accuracy. Plasma cutting results in minimal dross as the process itself gets rid of excess material, meaning very little finishing is required. Plasma cutting does not lead to warping as the fast speed significantly reduces the heat transfer.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Itjdpfjyzhl Dsx Achek

Condition: new, Year of construction: 2026, functionality: fully functional, sheet thickness (max.): 350 mm, sheet thickness steel (max.): 20 mm, total width: 2,450 mm, total height: 2,350 mm, total length: 4,800 mm, cutting height (max.): 350 mm, workpiece weight (max.): 6,500 kg, warranty duration: 36 months, space requirement length: 3,150 mm, space requirement height: 5,000 mm, space requirement width: 2,450 mm, Equipment: documentation/manual, The Bluemotion HCP Series CNC Plasma is engineered for fabricators who demand precision, reliability, and ease of use. Designed and manufactured in Ireland, every HCP Series machine is built using premium industrial components and supplied with industry-leading Hypertherm technology as standard, delivering exceptional performance from the very first cut. Itedpfezpzwmox Achek Standard Features: - Hypertherm Edge® Connect CNC Control - Hypertherm ProNest® CAD/CAM Software Included - 350mm Gantry Clearance for processing sheet metal, 3D Profiles - Bosch Rexroth Linear Motion Components - Fully Servo Driven Axes with Servo Motors & Drives - Sealed Energy Chains for max. reliability in harsh workshop environments - Integrated Laser Pointer for fast and accurate plate alignment - Intelligent 3D Collision Detection to protect the torch and machine - Heavy-Duty Welded Steel Construction - Intuitive operation with a streamlined workflow from CAD to cut. - Comprehensive Commissioning & Operator Training From importing a DXF into Hypertherm ProNest to producing finished components, the HCP Series has been designed to maximise productivity while remaining straightforward to operate. Whether you're producing one-off prototypes or high-volume production work, the HCP Series delivers the accuracy, speed and reliability modern fabrication businesses expect. Every Bluemotion machine is backed by expert technical support, professional installation, and ongoing after-sales service to ensure you get the maximum return on your investment. This price includes: - Hypertherm 85A SYNC Plasma Source (20mm Pierce Capacity) - 3-Year Full Machine Warranty Built in Ireland. Trusted by fabricators. Designed to perform.

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Itedpfezn Uuijx Achek Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2021, • Baykal BPL-H 4012 • Supplied new in 2021 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 3,480 and 5,448 Isdpfx Acozp D T Dehotk • 4 m x 10 m bed

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 • Supplied new in 2017 Itedpozp D S Tofx Achek • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 • 4 m x 12 m bed

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Isdpezupvuefx Achstk Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: used, Technical details: x-travel: 3000 mm y-travel: 1500 mm cutting thickness max.: 32 mm table-size: 3000x1500 mm burner heads: 1 Stück Swift-Cut is part of ESAB Welding & Cutting GmbH. The machine consists of several components: Plasma cutting table: Swift-Cut Plasma power source: Hypertherm MAXPRO200 / 400 V / 3-phase / 50 Hz / Max. output current: 200 A / Input current according to the nameplate: max. 64 A / Mild steel cutting capacity: 32 mm production cutting / 75 mm max. severance cut Extraction system: Keller VARIO-2-KM12-BE30 / Year of manufacture: 2019 Itjdpjzu Nhdjfx Achok *

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Itjdpfjzizkyex Achsk Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2020, functionality: fully functional, product height (max.): 610 mm, Equipment: double-sided, FICEP NOZOMI 601 RAZ - ROBOTIC PLASMA CUTTING SYSTEM FOR STRUCTURAL STEEL | YEAR 2020 The Ficep NOZOMI 601 RAZ is a fully automatic robotic plasma cutting system for three-dimensional thermal processing of steel profiles and beams. An anthropomorphic 9-axis articulated robot machines all four profile faces without re-clamping, replacing layout, thermal cutting, coping and grinding with one automated work cell - less handling, shorter throughput times, reproducible quality from CAD/CAM data. CONDITION Used - technically sound. The machine is currently in productive operation. Year 2020 - a comparatively young machine of its class on the used market. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The NOZOMI 601 RAZ combines plasma cutting, coping, bevel cutting, weld-seam preparation and marking in a single pass. The non-contact laser scanner measures the profile surfaces and determines the torch start position automatically. The system processes H-beams, U-channels, L-angles and flat bar. Typical applications: structural steel, bridge and plant construction, series production of connection and node details. Plasma processing uses the Hypertherm True Hole process. TECHNICAL DATA - Manufacturer: Ficep | Model: NOZOMI 601 RAZ | Year: 2020 | S/N: 36291 - Machine type: Robotic plasma cutting system (thermal profile processing) - Condition: used, technically sound - Profile size min.: 80 x 10 mm - Profile size max.: approx. 610 mm profile height (flange width to be confirmed during inspection) - Profile types: H-beams, U-channels, L-angles, flat bar - Machining sides: 4 | Clamping: automatic - Number of CNC axes: 9 | Design: anthropomorphic articulated-arm robot - Profile measurement: laser scanner, non-contact, fully automatic (multi-surface) - Cutting process: plasma | Plasma cutting heads: 1 - Plasma technology: Hypertherm True Hole - Bevel cutting: 45-degree bevels, copes, weld-seam preparation Iedexq Rpnspfx Achetk - Marking function: yes (orientation marks, weld symbols, labelling) - Software: Steel Projects PLM (licence transfer on request), free vector programming, automatic nesting - Infeed length: 16 m | Outfeed length: 16 m - Extraction: integrated particle filter system Machine weight, electrical connection values and max. plasma cutting thickness are confirmed on request. SCOPE OF DELIVERY - 1 x Ficep NOZOMI 601 RAZ robotic thermal cutting system (year 2020) - 1 x anthropomorphic 9-axis articulated-arm robot - 1 x plasma cutting head (Hypertherm True Hole compatible) | 1 x automatic torch changer - 1 x laser-scanner measuring system (non-contact, multi-surface) - 1 x infeed roller conveyor (16 m) | 1 x outfeed roller conveyor (16 m) - 1 x automatic clamping device | 1 x integrated extraction system LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is a specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 2013, Used plasma cutting machine from Haco Type: Compact 3015 Table dimensions: 3000 x 1500 mm Itedpfx Acoznun Nshok Hypertherm HPR 130 amp power source Includes spare parts

Year of construction: 1999, condition: used, Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement. Iedpszun U Ajfx Achjtk

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Iodpfx Aeyvd Uiochotk Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Current requirement: 120 A Machine type: CNC plasma cutting system CNC control: iMSNC Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Isdpjwmqwyofx Achstk

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Itedpfx Acsri Skaehek

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Itedpjxwn Insfx Achek

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Manufacturer: MicroStep Iodpfxjzt Imio Achjtk Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Includes dust extraction system Donaltson Torit DCE. Machine available from September. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Cutting torch hose assembly, Kjellberg, percut 370m, 1.5 m length, without cutting head, 11.846.921. Iedpfxjztu D Ie Achetk

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2325 08 1323, sheet thickness (max.): 200 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 6,050 mm, No minimum price – guaranteed sale to the highest bidder! The machine's control system was renewed in 2021! Flexible gantry machine for plasma and oxy-fuel cutting TECHNICAL DETAILS Track gauge: 3,100 mm Working length: 6,050 mm Torch carriage Actual number of torch carriages: 1 Number of torch carriages: max. 2 Cutting performance Cutting thickness with standard torch: max. 200 mm Itedpfxozm I Sle Achok MACHINE DETAILS Overall width: 4,610 mm Overall length: 8,000 mm Drives: AC servo motors with planetary gears Mains voltage: 3 × 400 V / 50 Hz Extraction and filter technology - CNC-controlled extraction tables - Cartridge filter systems with pneumatic cleaning Cutting test according to EN 1090 Test according to EN 1090-2:2018+A1:2024 Date of last test: March 7, 2025 Tested by the Belgian Institute of Welding (BIL) Tested material grades: S355 / S690 QL1 Execution class according to EN 1090-2: max. EXC 4 Cutting test report available on request EQUIPMENT - Lincoln Burny Phantom II software - High-performance servo motor MTI Motion’s Brushless T0851 - Cutting torch head with control and oxy-fuel torch IHT M4000 - Automatic height control

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) Itodpfjy E Nxgex Achek ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A Itjdpfx Asy E Nykschek 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs. Isdpetp Dhpofx Achetk  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Dross free* 32 mm (1-1/4") Production pierce 38 mm (1-1/2") Maximum cutting capacity 64 mm (2-1/2") Stainless steel cut capacity Isdpfx Acey Tpqxohjtk Production pierce 32 mm (1-1/4") Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) Iedsvpalaopfx Achotk ◼ Safety devices (safety bumpers, emergency stop cord)