Used Cutting Torch for sale (14,413)

Year of construction: 1986, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Features: On/Off switch, without controls or potentiometer -Motor: 180 V/30 W Gujdpfx Aofc R Dwog Tjh -Dimensions: 580/370/H280 mm -Weight: 17.5 kg

Condition: used, Plasma cutting unit HYPERTHERM, Type Max 100 Gedpfjyah Sasx Ag Teuh Plasma cutter with machine torch Machine No. 70-2513, Year of manufacture 1990 Power: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity: up to 32 mm material thickness Adjustment range: stepless Hose package length: 22 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 63 Amps plug - Hose package with machine torch (hand torch without switch) - Spare nozzles for the plasma cutting torch - Separate push button switch for starting the plasma cutter Space requirement L x W x H: 850 x 700 x 1100 mm Weight: 225 kg Good condition Ideal for retrofitting to an oxy-fuel cutting machine.

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine Gusdpfoxy Hqtsx Ag Toh -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Godpfxeyah R Nj Ag Teuh Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W Guedpfoxy Hqaox Ag Teh -Dimensions: 520/270/H330 mm -Weight: 8.6 kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch Godoxy Hr Rjpfx Ag Teuh -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.2 kg

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder Gusdpfez Nyv Tox Ag Tsh * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: good (used), Flame cutting machine, torch, oxy-fuel cutting machine Godpfen D Uq Ssx Ag Tsuh -Shaft diameter: 28mm - Shaft length: 200mm - Rack length: 140 mm -Total length: 320mm -Socket diameter: 42 mm -Weight: 2 kg

Condition: used, Plasma cutting machine CLOOS, type CPS 40/80 Gedsdzqccspfx Ag Teuh Year of manufacture: 1990 Output at 60% duty cycle: 80 Amps Output at 100% duty cycle: 40 Amps Adjustable range: 40 and 80 Amps (2 stages) Cutting capacity in steel: max. 25 mm Torch cable length: 5.5 meters Power supply: 400 Volts with 32 Amp plug - CLOOS hand torch Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm Guodofhxpxopfx Ag Tjh -for: 16 mm nozzle diameter -Weight: 1.3 kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit Gusdpfex Hfdzex Ag Toh -Manufacturer: WMW, Hand cutting torch cutting insert with lever valve -Type: 520/1 EN ISO 5172 -Number: 6x cutting torches available -Price: per piece -Dimensions: 465/100/60 mm -Weight: 1.1 kg/pc.

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Gusdpfjdzqa Hsx Ag Teh Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: good (used), Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: Messer Griesheim, machine cutting torch -3 connections: gas/oxygen/cutting oxygen -Dimensions: 540/180/120 mm -Weight: 4.1 kg Gsdpew T I Rijfx Ag Tsuh

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable -Dimensions: 460/210/230 mm Gsdofdb Uqepfx Ag Teuh -Weight: 7.6 kg

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. Gsdpfxsz Rivfj Ag Tjuh • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Plasma nozzle Plasma electrode Ceramic cap Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps Gujdpfxez N Sgkj Ag Teh data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of cooling: air, input current: 16 A, Duramax Lock H75°6m Design: Gujdpfx Agez D Akuo Teh · Professional plasma cutting machine for cutting metals up to a recommended thickness of 16 mm (max. 29 mm) · Manual and machine operation with CNC interface and FastConnect™ torch connection · Patented technology for cutting with surface contact · Automatic adjustment of air pressure via Smart Sense™ technology · Marking, scribing, and precise beveling with the new low-amperage process · Duramax® Lock torches are designed for high impact resistance and temperature resistance Scope of delivery: includes torch and ground cable Workshop-tested used unit

Condition: good (used), EBA 551-06 Paper Cutting Machine Gsdpfsz Rk Nmex Ag Touh The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: used, Year of construction: 2018, functionality: fully functional, Working area: 3000 × 1500 mm Design: Downdraft / fume extraction table Plasma source: Hypertherm Powermax65 Gjdpsz Iniqjfx Ag Teuh Max. current: 65 A Plasma source power supply: 400 V / 3-phase Compressed air: min. ±5.9 bar CNC plasma cutting machine with automatic torch height control

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Gsdpfxjz Rk Ngs Ag Touh Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: good (used), functionality: fully functional, total height: 2,350 mm, total width: 1,200 mm, total length: 2,750 mm, overall weight: 3,500 kg, workpiece weight (max.): 1,000 kg, Workpiece diameter: ø25 - 630 mm (min-max) Torch stroke: 1500 mm Chuck through-hole: ø200 mm Gsdpjz H Nzfsfx Ag Tsuh Cutting speed: 2000 mm/min Max. workpiece weight: 1000 kg PLC Controller: Siemens C7-633 Cutting process: Plasma cutting or oxy-fuel cutting Country of origin: Germany Machine (L×W×H): 275 x 120 x 235 cm Machine weight: ca. 3500 kg

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Gsdpfxozg D I Aj Ag Tjuh

Condition: new, Year of construction: 2026, functionality: fully functional, sheet thickness (max.): 350 mm, sheet thickness steel (max.): 20 mm, total width: 2,450 mm, total height: 2,350 mm, total length: 4,800 mm, cutting height (max.): 350 mm, workpiece weight (max.): 6,500 kg, warranty duration: 36 months, space requirement length: 3,150 mm, space requirement height: 5,000 mm, space requirement width: 2,450 mm, Equipment: documentation/manual, The Bluemotion HCP Series CNC Plasma is engineered for fabricators who demand precision, reliability, and ease of use. Designed and manufactured in Ireland, every HCP Series machine is built using premium industrial components and supplied with industry-leading Hypertherm technology as standard, delivering exceptional performance from the very first cut. Standard Features: - Hypertherm Edge® Connect CNC Control - Hypertherm ProNest® CAD/CAM Software Included - 350mm Gantry Clearance for processing sheet metal, 3D Profiles - Bosch Rexroth Linear Motion Components - Fully Servo Driven Axes with Servo Motors & Drives - Sealed Energy Chains for max. reliability in harsh workshop environments - Integrated Laser Pointer for fast and accurate plate alignment - Intelligent 3D Collision Detection to protect the torch and machine - Heavy-Duty Welded Steel Construction - Intuitive operation with a streamlined workflow from CAD to cut. - Comprehensive Commissioning & Operator Training Godpfx Aozpzwmog Tjuh From importing a DXF into Hypertherm ProNest to producing finished components, the HCP Series has been designed to maximise productivity while remaining straightforward to operate. Whether you're producing one-off prototypes or high-volume production work, the HCP Series delivers the accuracy, speed and reliability modern fabrication businesses expect. Every Bluemotion machine is backed by expert technical support, professional installation, and ongoing after-sales service to ensure you get the maximum return on your investment. This price includes: - Hypertherm 85A SYNC Plasma Source (20mm Pierce Capacity) - 3-Year Full Machine Warranty Built in Ireland. Trusted by fabricators. Designed to perform.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 MACHINE DETAILS Control system type: CNC control Gusdjz N Dutopfx Ag Tjh Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm Gujdpjz R Iq Usfx Ag Tsh – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.