Used Plasma Bevel for sale (1,016)

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring Gsdex A Swdjpfx Admett • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Gtedpfx Aox Ek Rdodmst Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Year of construction: 2000, condition: ready for operation (used), A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Gsdpfx Adsxghn Tsmett

Condition: new, Year of construction: 2024, NEW PLASMA CUTTER 3,000 x 1,500 GENERATOR 120 A Plasma Cutting NEW . Complete with CAD CAM softwere. DWG and DXF data transfer via USB and network card. CE mark. ISO 9001, GB/T 19001. 120 A generator. Gtedstu E Duepfx Admst The cost of production is ridiculous only 5.5 kW and compressed air!!!

Condition: used, Year of construction: 2017, Plasma cutting machine from 2017, little used, made in Turkey. Fully operational. Currently selected. Technical Parameters Table surface: 2 500x 12000 mm Plasma generator: AJAN PP 260 (Precision Plasma 260 A ) Machine bridges: 1 PCS Plasma burner: Ajan (1 pc.): Gas burner: AJAN (1 pc.) + with optical ignition CNC systems: CNC control, Linux Standart equipment Ventilated width of the work table: 2500 mm Ventilated length of the work table: 12000 mm Maximum size of the sheet: 2500 x 12000 mm Quantity of bridges: 1 unit. Plasma system: PP 260 Ajan Current: 30A, 80A, 130A, 260A Cutting Ability (low-carbon steel): 32 mm Cutting Capacity (stainless metals): 20 mm Maximum piercing of holes: 40 mm Max. Cutting ability (cut from edge): 100 mm Max. Cutting capacity of the gas head: 150 mm Maximum cutting speed (theoretical): ~ Almm/min (actual speed depends on the material, brand and thickness of the piece) Positioning max: 15 m/min Re- positioning max: +/-0.01 mm Taper angle in accordance with ISO 9013 standard "range 3′ Gases for cutting: 02, N2, F5, H35 Protection: compressed air Ventilation of the table: mechanical valve Filtering: JET filter AJF Functions - a bridge controlled by two 2-way servomotors of the AC type - automatic ignition of the gas burner - automatic gas control (for plasma and gas cutting) - automatic burner height control (plasma) THC - the function of "ohmic control" - function "ARC control" - function "Microjoint" - function marking with a plasma head Control - programmable possibilities with DIN/ISO codes - Ability to work with DXF, ESSI, and NC toolpath files - Ventilator and generator for remote start and remote control with CNC - AJAN-CAD - AJAN-i own control - AJANCAM V 7.0 - AJAN-i own software The start package Include: 20 electrodes, 20 nozzles, 20 nozzle covers, 2 gas rings, 2 nozzle rings and coolant required to start the machine. AJAN-i CNC LINUX NEW from 2017! AJAN CNC based on the LINUX operating system "Allinclusive" Control Panel - Free AJAN-CAD V 7.0 - Free software updates - Geometric Shape Catalog Automatic restart if stopped (power) - Possibility of programming DIN / ISO G codes - Ability to work in DXF, ESSI trajectories and NC files - Wide selection, tuning and recording of the program - Automatic selection of material and parameters (customize) AJANCAM v 7.0 AJANCamv7.0 was developed by its own software configuration, which has the following features: - Easy to use, fast and efficient - Automatic errors, provisioning - Ability to write a text - its own directory (libary) - Automatic or manual placement - Cutting sequential modelling - According to the automatic layout of DXF and G-codes ESSI making The total ared: 384 m2 Filtration elements: 16 Elements of Noise filter: 85 dBA Ventilation Fan power: 11kW Feature blow dry with compressed air If you have more questions, welcome. Gtjdpfxsrf S Tbe Admot

Condition: new, Year of construction: 2025, -Tfon Bevel Wizard® Linear -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications - Optimized for Large Workpieces Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Gtjdpfjrt Tpnjx Admet Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm Emery Band Drum Diameter: Ø400 mm Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Godpfx Aox A Svtodmott Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Gtodpfx Adox Eg T Eemjt

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring Gtsdpfoxt Rddex Admjt • Leak-stop operation (suction mode) • Draining for tool change • Manual filling • Dirt filter • Unit mounted on rubberized castors • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503643 Machine type / Device type: Temperature Control Unit Manufacturer: plasma Gtsdpfjxt Rc Hjx Admjt Model: plasTemp Primus 90 Year of manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating power: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K; pressure difference in the cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Equipment includes: • Self-optimizing SBC microprocessor controller • Digital display of set and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault reporting • Acoustic alarm indicator • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Suction for tool change • Manual filling • Dirt filter • Unit mounted on rubberized casters • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L = 0.73 m, W = 0.27 m, H = 0.58 m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503637 Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Gedpfx Ajxt N Hwsdmstt Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160°C Heating capacity: 9 kW Circulating medium: Water/water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock No.: 503634 Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Godpfjxt N D Nox Admett Circulating medium: Water

Year of construction: 2016, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503629 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2016 Max. operating temperature: 95°C Heating capacity: 6 kW Gtodpfxjxt Nnus Admet Cooling capacity: 40 kW (80 °C flow / 15 °C cooling water) Heat transfer medium: Water/water

Year of construction: 2017, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503628 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2017 Gsdpfx Adext Nm Romstt Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80 °C supply / 15 °C cooling water) Heat transfer medium: Water

Year of construction: 2017, condition: good (used), Temperature control unit plasma easytemp 95 Stock no.: 503627 Machine type/Device type: Temperature control unit Gtodsxt Nm Depfx Admot Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2017 Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80°C supply / 15°C cooling water) Heat transfer medium: Water

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Gsdpfox I Ehpsx Admstt Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Year of construction: 2018, condition: excellent (used), Profile Cutting System Cobra 2000 Nominal Cutting Area 2,000 x 8,000 mm - CNC Type EtherCAT EDGE Connect: 4-Axis Cutting Table Kemper Mechanical Heavy Duty with easyFRAME Plasma Arc Cutting System XPR300 VWI Communication Method Ethernet Gtedox Uv N Ropfx Admot CAD/CAM Software Procut Professional (1) TORCH CARRIAGE CONFIGURATION Torch Carriage 1 (Master) Station 1 Cutting System XPR300 VWI Height Control Arc-Voltage THC Collision Protection Magnetic Breakaway

Condition: used, Year of construction: 2008, total width: 2,400 mm, total length: 8,000 mm, total height: 2,500 mm, Empty weight: 8.000 kg Price: On request Track: 8000x4500mm Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Control type: Vision 52 - Control: CNC - Travel X: 6000mm - Travel Y: 2500mm - Resonator type: Precision Plasmarc 401 - Max. sheet thickness: 40mm - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gtedpfx Asx Uw T Rodmst Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Gedpfex Hbkqox Admjtt Application Types Cutting

Condition: used, Year of construction: 2000, 6 Meter weight of the machine ca. 1 t +++++ Gtjdog Sxzzjpfx Admst Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, This listing is for a Labcold RVPF0734 Plasma Freezer. The unit is in full working condition and is ready for immediate release. Ensure the highest standards of blood plasma storage with the Labcold RVPF0734 Plasma Freezer, a state-of-the-art laboratory-grade solution designed for optimal performance and safety. This floor-standing freezer combines advanced technology with a space-saving design, making it an ideal choice for healthcare facilities and research laboratories. Key Features: Optimal Temperature Control: Achieve a consistent temperature range of -34°C, essential for preserving plasma quality and integrity. Faster Thawing Times: Designed to minimize thawing duration's, reducing the risk of bag cracking and ensuring safe handling of sensitive materials. Convenient Storage: Equipped with front-opening doors and multiple storage drawers, allowing for easy access and organization of plasma bags. Digital Alarm and Display: Stay informed with real-time monitoring through a digital display and alarm system, ensuring immediate alerts for any temperature fluctuations. Chart Recorder: Track temperature changes over time for compliance and quality assurance. Benefits: The Labcold RVPF0734 is registered as a medical device in accordance with EU Directive 93/42/EEC and compliant with BS4376: Part 2:1996, ensuring reliability and safety in plasma storage. Its spark-free interior and lockable doors provide secure access and protection against flammable materials. Technical Specifications: Temperature Range: -34°C (tested to reach -36/-37°C) Safety Features: Spark-free interior, lockable doors Gjdpfx Asxx Afqjdmott Monitoring: Digital thermometer included for precise temperature tracking

Condition: good (used), Gearbox, Angle Gear, Worm Gear Gtedpfou Ria Tsx Admst -Manufacturer: Bonfiglioli, bevel gear from packaging machine ILAPAK Astra-STD -Type: RAN 20/SB -Translation: i = 1:1 -Shaft: Ø 20 x 50 mm -Direction of rotation: see photo -Dimensions: 240/210/H75 mm -Weight: 4.1 kg

Condition: used, Year of construction: 2000, total width: 2,000 mm, total length: 6,500 mm, total height: 2,000 mm, Empty weight: 2.500 kg Price: On request Steel/stainless steel/aluminum plasma capacity up to 12 mm. Hypertherm Powermax 1100, Harris Autogenous propane 3-200 mm. CR-electronic cutting/nesting software. Gedpsxrzl Aefx Admjtt - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: OXY031200 - Travel X: 4000mm - Travel Y: 2000mm - Resonator type: Hypertherm Powermax 1100 - Max. sheet thickness: 12mm - Transport dimensions: 6500mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Plasma cutting machine, plasma cutter for plasma cutting system Gtjdpfx Aswpg I Tedmjt -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 - Control type: Beckhoff - Control: CNC Gjdpfx Aoxrz Hmodmstt - Travel X: 3000mm - Travel Y: 1500mm - Resonator type: Hypertherm Powermax 105 - Max. sheet thickness: 32mm - Power: 16.8kW - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum