Used Planer for sale (1,497)

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on the thicknesser 250mm - max. thickness of workpiece on the side heads (3-sided) 110mm – from above: - ejectors - toothed infeed shaft - pressure pad - planing shaft - pressure pad - smooth outfeed shaft - pressure pad at the output – from below: - guide strip - adjustable rollers in the lower bed, 2 pcs – from the rear: - side spindles + pressure pad, 2 pcs - spindle height 110mm - spindle diameter 30mm Rjdpfx Aszu Sgpjdzecf - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed settings - electric bed lifting - dust extraction port 2x110mm - overall dimensions (L/W/H) 1650x1500x1210mm - weight 1370kg ADVANTAGES – Polish production – shaft for 4 knives – used planer, very good condition Net price: 23,900 PLN Net price: 5,690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7987 TECHNICAL DATA - Roller width: 500 mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230 mm – From above: - Anti-kickback fingers - Toothed, feed-in roller; pulling, swiveling Rodpfx Adszu Savjzecf - Pressure bar - Planing shaft - Pressure bar - Smooth, feed-out roller; pulling - Motor: 4 kW - Electrically adjustable table height - 2 feed speeds: 8/12.5 m/min - Dimensions (L/W/H): 1000x1000x1050 mm - Weight: 620 kg ADVANTAGES – Made in Italy – Used thickness planer, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers - planing shaft - pressure rollers - outfeed roller, smooth *from below: Rcodpfezu Sacsx Adzsf - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations)

Condition: excellent (used), CATALOGUE NO. 7966 TECHNICAL DATA - Max. planing width: 770mm - Max. two-sided planing height: 200mm - Electric adjustment of the table up/down - Max. four-sided planing height: 180mm From above: - Driven, toothed feed roller - Kickback devices - Pressure element - 2 driven, toothed feed rollers (first one sequential) - Pressure element - 770mm planing shaft, 4-knife, 7.5kW - Pressure element Rcsdpfozu R Uxex Adzjf - Smooth outfeed roller From below: - Guide bar - Split, smooth sliding roller - 770mm planing shaft, 4-knife, 5.5kW - 2 smooth driven feed rollers From the side: - 2 lateral spindles + pressure element: 1) Right vertical, 180mm, 5.5kW 2) Left vertical, 180mm, 5.5kW - Spindle diameter: 30mm - Spindles adjustable up/down, right/left - Manual planing width adjustment - 4 feed speeds: 6/9/12/18 m/min - Feed motor: 2.4kW - Extraction nozzle diameter: 160mm, 180mm, 2x120mm - Dimensions (L/W/H): 2600x1700x1650mm - Weight: approx. 3000kg ADVANTAGES - Ideal for processing beams, flooring, etc. - German-made by KUPFERMUHLE - Supplied with 2 spindle heads for the side spindles - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (subject to 4.2 EUR rate) (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper roller: 510mm - max. width of workpiece – lower roller: 450mm - max. thickness of workpiece, 2-sided: 200mm – from the top: - ejectors - 1 toothed metal feed roller - 2 metal feed rollers, sequential Rsdjzu R Thopfx Adzecf - 1 toothed metal feed roller - pressure roller - 510mm planing roller, 4 knives, with the possibility of fitting profile knives, approx. 7.5kW - pressure roller - smooth metal feed roller - upper pressure roller at the outlet with 2 rubber feed rollers – from the bottom: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing roller, 4 knives, 7.5kW - 2 smooth metal feed rollers – from the back: - 2 side spindles 1) vertical, right, 200mm, 6.6kW 2) vertical, left, 200mm, 6.6kW - spindle diameter: 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged alternately - electric height adjustment - 2 types of feed speed + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle: 2x125mm, 145mm, 130mm - dimensions (L/W/H): 3200x1740x1650mm + control unit - weight: 2100kg ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing rollers + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical specifications: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm Rodpfezu R R Hex Adzscf - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 toothed feed rollers, including 2 double rollers - 2 smooth rubber withdrawal rollers – from below: - side pressure before and after the roller in the lower bed - toothed feed roller, rotating, in the lower bed before the first spindle - 2 pneumatic side presses - smooth metal withdrawal roller - all rollers are pneumatically pressed - length of the feed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the planing thickness - lifting motor 0.75kW - stepless feed speed adjustment on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameter of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for both wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15920 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7219 TECHNICAL DATA - max. width of the workpiece: 200mm - max. height of the workpiece: 150mm Number of spindles: 4 1) horizontal, lower: 200mm, 5.5kW 2) vertical, right: 150mm, 4kW 3) vertical, left: 150mm, 4kW 4) horizontal, upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 feed rollers, toothed, including 2 double rollers - 1 feed-out roller, rubber, double Bottom: - feed roller, toothed, helical, located in the lower table - 3 side pressure rollers - feed-out roller, metal, smooth - all rollers are pneumatically pressed - length of the feed table: 2130mm - table adjustable up/down - central lubrication - electrical adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES – 4 heads Rodpfx Adszu R Rmezocf – ideal for both wet and dry wood – DTR documentation available – used machine, very good condition Net price: 52900 PLN Net price: 12590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm - number of spindles: 4: 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 150mm, 4kW 3) vertical left: 150mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm Rcedpfx Aszu R N Nodzsf - spindle speed: 6000 rpm From above: - 6 infeed rollers, toothed, including 2 double rollers - 1 outfeed roller, toothed, rubber From below: - 1 infeed roller, toothed, pulling, swiveling in the lower table - 3 side pressure rollers - 1 outfeed roller, pulling, metal, smooth - all rollers are pneumatically pressed - length of infeed table: 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment on inverter - feed motor: 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3550x1750x1800mm - weight: approx. 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7914 TECHNICAL DATA - roller width 640mm - number of knives 4 pcs - max thickness of the workpiece 250mm – from above: - pawls/ejectors - toothed infeed roller, pulling - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling – from below: - adjustable rollers in the lower bed 2 pcs - motor 7.5kW - electric bed lifting - lifting motor 1.1kW - 2 types of feed speed - feed motor 1.3kW - dimensions L/W/H 1130x1300x1200mm - weight 1026kg ADVANTAGES – manufactured by the Polish brand JAROMA – electric bed lifting – DTR documentation – used thicknesser, very good condition Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations) Rcsdpfx Aozu R Hnedzef

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls - geared infeed roller Rcsdszu R Ekepfx Adzef - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Year of construction: 1999, condition: ready for operation (used), A double planer Cremona including a log turner and an optional milling head is available. Working width: 900mm. An on-site inspection is possible. Redpfxsw I E D Ns Adzscf

Condition: used, AD thickness planer KDR STÖ310, year 1994, incl. transport unit, 2.2 kW, 1270 mm table length, 310 mm table width, 3 knives, 250 kg Redpfxjx H Udde Adzecf Price changes reserved, subject to errors, misprints and typographical mistakes.

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Subject to price changes, errors, and misprints. Rcjdpfx Adjwzzfkjzjf

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Rcodpfsvw Ebpex Adzef Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Surface and thickness planer Scheppach HMC3200, year of manufacture 1993, in good condition, 2.9 kW, 320 mm table width, 1380 mm table length, 150 kg Price changes reserved, subject to errors and typographical mistakes. Rcedpfx Adsx H Ugxszef

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. Rsdpezvfm Eefx Adzecf • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long Rcsdpfevwgm Hex Adzef - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg Rcsdpovwglvsfx Adzef tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm Rcsdevwgmgopfx Adzof dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: excellent (used), Year of construction: 2001, x-travel 2200 mm Rcsdpfx Adexa Hl Rjzsf y-travel 3200 mm z-travel 1250 mm Control FIDIA C20 c-axis +/- 200 ° milling-head swivable +/- +90 ° milling-head swivable +/- -100 ° feeds X-axis 50 m/min feeds Y-axis 50 m/min feeds Z-axis 50 m/min tool taper HSK A63 tool change unit 16 Pos. spindle turning speed range 18000 U/min distance between columns 4060 mm dist. milling spindle - table surface 1796 mm connected load 238 kVA weight of the machine ca. 45 t dimensions of the machine ca. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be viewed under power by arrangement with the seller. Description: Jobs LinX6 Type: 5-axis milling machine with movable gantry and fixed table Control: FIDIA C20 Year of manufacture: 2001 Travel X: 2200 mm Y travel: 3200 mm Z travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height between table and portal: 1807 mm Clearance height between table and spindle nose: 1796 mm Milling head: T2K D.01.06 Tool holder: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40KW Spindle speed: 250 - 18000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors in all axes - JIMS / preparation for semi-automatic motor spindle change - Replacement spindle as spare part - External coolant supply / 1000L tank - Minimum quantity coolant dosing - Scraper conveyor - Renishaw TS27 tool measuring system - Ethernet connection - Manual control module Other: Complete documentation available Machine weight: approx. 45 tonnes Space requirements: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rcodpszak Hgefx Adzjf Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: new, Year of construction: 2026, power: 6.99 kW (9.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, Planer Casadei / SCM. Type PS63. NEW annual 2026. Planer width 630mm x height 300mm. Equipped with Tersa- cutter and rubberized challenge roller, which gives a perfect planing result. Electronic setting of planer height and feed speed 5-8-12-18m/min. Planer height setting is done with the push of a button. 9.5hp engine with y/d start. Promotional price: 10.900 euro. Rcjdpfx Aszwkuksdzof We arrange shipping all over Europe

Condition: new, Feed roller for Hofmann thickness planer 210 mm wide Diameter 75 mm Rcjdpfxsk I Si He Adzof Internal hexagonal bore 9 pieces available

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, The machine is in working order and equipped with adjustable chamfer and radius cutters. Rcjdpfx Ajzp U D Hjdzof Technical data: Manufacturer: Kupfermühle Type: VUIN 750 Year of manufacture: 1962 Machine number: 8170 Working width: 750 mm Working height: up to 200 mm Planer heads: 140 × 200 mm Adjustable chamfer and radius cutters Powered infeed roller Segmented pressure bar Electric height adjustment Dust extraction pipes including collection manifold Condition: in working order Heavy-duty, durable machine construction for use in carpentry shops, sawmills, and timber processing plants. Inspection and test run possible by appointment.

Condition: new, Year of construction: 2025, Holzkraft Combined Jointer-Planer Machine - available immediately - Ideal for demanding craftsmen and carpenters The particularly long, one-piece jointer tables allow for easy surfacing of workpieces Work tables are made of gray cast iron, making them durable and permanently level Rear-opening jointer tables with spring support for quick and convenient setup changes Thanks to the permanently mounted dust extraction hood, no repositioning of the extraction hose is necessary during setup changes, saving valuable working time Helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the planer outfeed ensures even wood discharge Material feed with four speeds Planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Preparation for mortising attachment Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Rcsdpjih Dxdjfx Adzef Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total length of tables 2250 mm Chip removal max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter Planer 1 x 120 mm Drive power Main motor 7 kW Installation Information Space requirement Length 2250 mm Space requirement Width/Depth 1440 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Planer Planer table Length 850 mm Planer table Width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Chip removal max. 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min Location: In stock at 54634 Bitburg - available immediately -