AUTOMATIC BORING INSERTING MACHINE

WEEKE (HOMAG Group) PROFI BST 800

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) Hfodpfx Aox Aqi Eoagjg N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Hfjdpeim Si Aofx Aagsg Construction year 2011 We can offer you this robot overhauled too!

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Hodpsftdv Usfx Aagofg Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled - Saw shaft: included Heden I Twyepfx Aagsfg

Condition: excellent (used), Year of construction: 2015, Low-usage inserting machine with the following configurations: - 2 feeder stations for unfolded documents with high capacity (325 sheets) - 1 feeder station for enclosures with high capacity (300 enclosures) – OPTIONAL - 1 feeder station for envelopes (DL, C6/5, and C5, as well as other formats) - Daily mail function for up to 5 sheets - Extra-long documents can be processed - Paper length: 127–406 mm Hedpfx Aeiyx Ixjagofg - Paper width: 127–229 mm - Envelope formats: DL, C6/5, C5, or 88x220 to 164x242 mm - 'Flip-flop function': automatic switching when one feeder tray is empty - Automatic double feed and misfeed detection - Automatic adjustment of fold lengths (no opening/adjustment required) - Automatic height adjustment of the address window - 4 fold types: single, letter (C-fold), Z-fold, double-parallel fold - 20 programmable memory slots - Large display with graphical and text interface - Up to 8 sheets/envelope - Up to 3,500 cycles/hour - Counter reading: 249,103 cycles

Condition: new, Year of construction: 2024, Boring and inserting machines Rilesa Vlg 2200 new 2023 Make: Riles Model: Vlg 2200 Description: Condition: new Year: 2023 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Machine Tools equipment in Poland Subcategory: Drills Subcategory 2: Drilling machines Description Hfsdpfx Aogbpmhoageg DRILL DRILL WITH STORAGE 8 DRILLING UNITS TWO FRONT RIGHT AND LEFT, 3 UPPER AND 3 BACKS Year: 2023 new

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hedexy Tmnopfx Aagefg

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Hedjwuz N Nspfx Aagsfg Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hodpjh Axd Njfx Aagofg

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. Hfodpfx Asdfgg Isageg B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader