Firefighting vehicle 4x4x4

Brimont PM ETR Feuerwehr 4x4x4 AHK verwindbarer

Condition: used, machine/vehicle number: 005107, Stock dimension length: 18800 mm Stock dimension width: 15000 mm Fedpfx Asiiipuog Iepl

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: Fpedpfszkmqzsx Ag Ijl pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Fpsdoq Ehpaopfx Ag Iol Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, mileage: 26,455 km, power: 103 kW (140.04 HP), first registration: 02/1998, fuel type: diesel, empty load weight: 4,940 kg, maximum load weight: 2,550 kg, overall weight: 7,490 kg, axle configuration: 4x2, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 9, Equipment: ABS, additional headlights, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, ABS (anti-lock braking system), differential lock, rotating beacon, storage box, leaf springs, U-protection Construction: Firefighting vehicle LF8/6 with Ziegler construction, built-in pump FP 8/8 & 600l water tank. Sales to businesses or export are subject to 19% VAT! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Fjdpjvhn Iysfx Ag Iopl

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Fpodpoztpw Njfx Ag Iel Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Fjdpfjzqggvex Ag Ispl Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, mileage: 52,000 km, power: 125 kW (169.95 HP), first registration: 01/1989, fuel type: diesel, overall weight: 11,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, Year of construction: 1989, Manufacturer Mercedes Model 1117 4x2 Fire truck - Feuerwehr - Bomberos - Tankspritze Year 1989 Condition Good Serial Number WDB67601215364319 Ref. nr. 927725 Reg. date: Hk: 170 Km: 52.000 Gearbox: 4-speed automatic Diesel tank: 1 Tank liter: 150L Fpodpfx Agevkz Irs Iol Crew cabin: ? Cabin type: Crew cabin Drum brake: ? Tire Size: 245/70R19.5 Cover% left 50% - 90% Front suspension: Springs Suspension rear: Springs Toolbox: ? Total weight: 11000 Kg Net weight: 7000 Kg Load capacity 4000 Kg Pump: Rosenbauer Pump timer: 834 Ladders: ? Light pole: ? Hose reel: R-Side + L-Side

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Fpodpfxezmglko Ag Ijl Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: used, mileage: 27,864 km, power: 96 kW (130.52 HP), first registration: 11/1978, fuel type: diesel, empty load weight: 4,490 kg, maximum load weight: 3,000 kg, overall weight: 7,490 kg, tire size: 8.25R16, axle configuration: 4x2, wheelbase: 3,300 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 5,850 mm, total width: 2,450 mm, total height: 2,650 mm, Equipment: cabin, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension Wheelbase: 3300 mm Superstructure: Fire-fighting vehicle with water tank from 1st ownership, TLF 8, pump FP 8/8, water tank 2240 liters, Ziegler superstructure, engine 6 cylinders OM 352, top speed 89 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Fsdpjvhha Nsfx Ag Iopl

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Fedpjyw Ivhofx Ag Ijpl Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm