Used Pellet Mill for sale (9,823)

Year of construction: 2005, condition: used, Used machine Gjdpfeyxyanex Acwebk Year of manufacture: 2005 Equipment and technical specifications: Blockhouse milling machine BL100A – Four-spindle unit Designed for the production of chalet corner joints by milling all four sides of the log beam in a single clamping operation using 2x vertical and 2x horizontal milling spindles. Processing dimensions: 140 x 200 mm Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 4 x 220 x 100 mm Motor power: 4 x 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Operation: Triggered by two-hand control / via control unit Milling depth adjustment via spindle, digital counter Workpiece clamping device: 2x vertical pneumatic clamps Extraction: Underfloor extraction funnel, diameter 160 mm Complete with electrical equipment, PLC control, and pneumatics. Machine base prepared for integration of an end groove and drilling unit as well as the cross-cut saw. Enclosed machine housing with hinged safety hood (supported by gas strut) and viewing window. Electric control cabinet mounted on base with 3.0 m cable duct. Ready for operation, but without tools! 2 horizontal clamps on the BL100 machine table Operation: Pneumatic, accessible from the front Automatic clamping cycle via PLC control. End groove unit Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 180 x 40 mm Motor power: 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, without cutter! Horizontal drilling unit with drill guide and chip guard Drill diameter max.: 30 mm Motor power: 1.1 kW Speed: 1,500 rpm Feed: Pneumatic, infinitely adjustable with rapid traverse for idle stroke Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, with drill bit D=20mm! Under-table crosscut circular saw in BL100A – For automatic operation only! Max. cutting size (WxH): 200 x 140 mm Saw blade diameter: 500 mm Motor power: 4.0 kW Cutting speed: 86 m/s Feed: Pneumatic Operation: Only via automated program (not included in delivery) Workpiece clamping device: Pneumatic Extraction funnel: diameter 120 mm Integrated in the BL100A, complete with electrical equipment and pneumatics – Ready for operation, including saw blade! Prepared for automatic operation Includes sliding table (mechanics, pneumatics, and electrics) for the end groove milling unit and the electrical interface for controlling the functions of the BL100A using an external Tigerstop control system. Infeed table length: 9 m Outfeed table length: 4 m Further technical description to follow Availability: End of March / Beginning of April 2026 Location: Netherlands

Condition: used, Year of construction: 1992, Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. Gbodpfx Aoyuv Sdjcwok Location: This lot is located in Birmingham, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device Gjdox Sx Htepfx Acwjbk • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Gedpfsyz Sdqox Acwebk Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Year of construction: 1980, condition: excellent (used), Deckel FP1 milling machine in very clean condition. Specifications: - X axis 300mm - Y axis 160mm - Z-axis 340mm - ISO 40 intake - speed 40-2000rpm - dimensions: 1200 x 1100 x 1800 mm - weight: approx. 800 kg Gbodpfx Askuynuscwek Accessories: - Heidenhain TNC 113 digital on 3 axes - Tilting table - Variable feeding X and Z axis - Cooling

Condition: good (used), Year of construction: 2017, functionality: fully functional, CMS Brembana Vertec – Vertical CNC Glass Milling & Drilling Machine Available from Week 17 We offer a well-maintained CMS Brembana Vertec milling and drilling machine, designed for high-precision vertical processing of glass. This machine is ideal for companies operating in architectural, interior, or technical glass sectors, requiring milling, drilling, and edge processing in a single setup. Key Features - Vertical CNC machining centre for glass - Processing direction: left to right - Suitable for milling, drilling, countersinking, and edge processing - Compact footprint with high productivity - Front and rear tool magazines (9 positions each) - Automatic tool changer - Integrated lubrication and cooling system - CNC control system with user-friendly interface - Robust industrial build quality (CMS Italy) Working Range - Max glass length: 3200 mm - Max glass height: 2200 mm - Min glass length: 420 mm - Min glass height: 180 mm Technical Information - Manufacturer: CMS (C.M.S. S.p.A., Italy) - Model: Brembana Vertec Mill - Voltage: 400V / 50-60Hz - Phases: 3 + N - Full load current: 31A - Short-circuit rating: 10kA - Machine type: Vertical glass processing centre Condition - Machine is in good working condition - Regularly maintained - Can be inspected under power by appointment Included - Tool holders and selected tooling (as shown) - Spare parts cabinet (optional / negotiable) - Documentation (if available) Availability - Available from Week 17 Gsdsyzf Rdspfx Acwjbk - Location: Netherlands Additional Information This machine provides a reliable solution for workshops seeking to improve efficiency in glass processing with a vertical setup. Suitable for both small series and serial production. We also have videos of the machine in operation. Please inquire for further information.

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m Gbjdpfxoxndaho Acwek

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs Gbsdpeycln Djfx Acwok spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: like new (used), Year of construction: 2023, machine/vehicle number: IV68/ IV78 /V88, functionality: fully functional, operating hours: 30 h, Professional Cutter Set for Spindle Moulder / Edger – Double-glazed Timber Frame, Like New For sale: complete set of interchangeable carbide cutters from Lehmann – Caul (Tool Experience), used only 3 times for manufacturing IV68 timber frames. This lot includes a full range of carpentry tools suitable for profiling and machining double-glazed timber frames: ✔ Opening cutters (A1, A2, A3, A4, A8, A9, A10) ✔ Fixed frame cutters (B1, B2, B3, B5, B6, B8, B10) ✔ Complementary/Counter-profile cutters (C1, C2, C4, C5, C8) ✔ Special tooling (e.g. D4) ✔ Professional-grade reversible carbide knives ✔ Several reducing rings All tools are fully compatible and modular—no missing parts for standard timber frame manufacturing. New value: €15,340 (with invoice) — Gedpfox Dmgiox Acwjbk 🔹 Condition: Excellent / barely used 🔹 Bore: 60 mm (majority of cutters) 🔹 Diameters: from 197 mm to 353 mm depending on model 🔹 Suitable for industrial spindle moulders, production optimized Why this is an opportunity: ✨ Complete ready-to-use set ✨ Condition like new ✨ Perfect for professional joiners or manufacturers ✨ Immediate productivity boost ✨ High new purchase value — Who is this for: ✔ Timber joiners ✔ Door and window manufacturing workshops ✔ SMEs or craftsmen seeking a professional-grade set ✔ High-end tool collection Further information: 📍 Collection in person possible 📦 Professionally packed for shipping 📸 Detailed photos available on request

Condition: used, Year of construction: 1999, x-travel 500 mm y-travel 400 mm z-travel 400 mm control Heidenhain weight of the machine ca. 3200 kg Gbsdpfxey Aa Nko Acwok

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. Gedjyzyudopfx Acwsbk *

Condition: used, Year of construction: 2019, x-travel 1.270 mm y-travel 508 mm z-travel 635 mm Control Haas distance spindlenose to table 742 - 107 mm spindle tunring speed 8.100 U/min spindle drive 22,4 kW max. torque 122 Nm Gedpfxjy Aa Slo Acwjbk tool taper SK 40 table dimensions 1.321 x 495 mm table load capacity 1.588 kg rapid traverse ( x / y / z ) 25.4 m/min number of tool places 20 Pos. max. tool diameter 89 mm max. tool weight 5,4 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical specifications & accessories: - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2008, workpiece dia. 2-55 mm max. module 1,5-2,0 mm total power requirement 5 kVA working lenght 200 mm Control Fanuc 30i-A weight of the machine ca. 3,5 t dimensions of the machine ca. 2,20x1,80x1,85 m CNC Gear Hobbing and Worm Milling Machine – Compact Precision Machine Working Range & Capacity - Workpiece diameter: 2 – 55 mm - Module range: max. 1.5 – 2.0 mm (depending on the material) - Machining length (generating): up to 200 mm - Maximum workpiece length: 330 mm Milling head swivel range: - Gear hobbing: ±45° - Worm gear cutting: +45° / –37° Spindles & Drive - Workpiece spindle: Motorized spindle, speed up to 1,500 rpm - Milling spindle: Gbodpfoy Aa Dzsx Acwsk Standard: up to 5,000 rpm Optional: up to 8,000 rpm - Milling spindle power: approx. 1.5 kW - Torque: 4.7 Nm Axes & Travel Ranges - X-axis (radial): 70 mm - Y-axis (shift): 30 mm (optional up to 60 mm) - Z-axis (axial): 250 mm Machine specifications - Machine weight: approx. 3,500 kg - Dimensions (L x W x H): approx. 2,200 x 1,800 x 1,850 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Gsdeyz Unlspfx Acwobk Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 min-1 inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 min-1 max. diameter of the vice bore: 25 Gbedpfjyz Um Isx Acwok dimensions: 1.100 x 1.100 x 1.660 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Gedpfeyz Ui Njx Acwebk Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Gbedpfjyz Ugzox Acwsk Weight: approx. 8 kg The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: good (used), Year of construction: 1980, Table size 1300 x 355 mm Tool holder, vertical + horizontal ISO 50 Travel X-axis 1000 mm Y-axis 350 mm Z-axis 450 mm Vertical milling head, swiveling R + L Quill stroke 100 mm Speed range 22.4 – 1400 rpm Feed range 6.3 – 630 mm/min Rapid traverse 2.5 m/min Drive power approx. 5 kW Space requirement L x W x H 1900 x 1800 x 2100 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, make FAGOR • Swiveling vertical milling head (R-L) with quill adjustment 100 mm • Vertical and horizontal milling spindle ISO 50 • Milling spindle vertical + horizontal • Large Clamping table 1350 x 350 mm • Feed and rapid traverse in all axes • Wide, stable guideways • Central lubrication • Swiveling control panel • Coolant system • EMERGENCY STOP switch Gbjdpfxjvu Dv Ts Acwek Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2003, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Gbodpfx Acjbpmurowjk Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E [...]

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: X-axis: 400 mm Y-axis: 350 mm Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Gbodpfx Aceupiypewjk Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Spindle mount vertical + horizontal: SK 40 Quill adjustment: approx. 80 mm Table clamping surface: 800 x 340 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 500 mm Speed range: 35 – 1550 rpm Table adjustment: Feeds: 6 – 270 mm/min Rapid traverse: X + Y Drive power: approx. 3 kW Machine dimensions (L x W x H): 1350 x 1300 x 1880 mm Weight: approx. 1750 kg Accessories / Special features: • As-new 3-axis digital readout SINO • Swiveling vertical milling head R + L, quill adjustment • Horizontal milling spindle • Feed on all axes • Rapid traverse X + Y Gbsdpoin Dktsfx Acwek • Coolant system • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1993, x-travel 0500 mm y-travel 400 mm Gsdpfx Acsyy A Dxewsbk z-travel 420 mm table-size 800 x 400 mm feed range 1- 3000 mm/min rapid traverse 0,083- 5 m/min Tool bore ISO 40 turning speed range 20- 4000 U/min main drive DC 5 kW CNC control 355 HH total power requirement 10,9 KW weight of the machine ca. 2300 kg dimensions of the machine ca. 2,5 x 2,5 x 2,0 m CNC milling machine with Heidenhain TNC 355 Control and housing arround working area.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Gbedpfx Aceyymvlewsk Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz Gbjdpob A Igpsfx Acwjk -with indexable insert milling cutter -Number: 3x motors available -Price: per piece -Weight: 6 kg/piece

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Gbedpfxjyzpm No Acwjk