Used Impact Mill for sale (10,542)

Condition: excellent (used), Offered for sale is a used Ratzinger impact mill D800. 75 kW motor – NEW! Completely overhauled. Wear parts replaced. Steel construction included. Bedsw H Savspfx Anuowr

Condition: excellent (used), functionality: fully functional, power: 110 kW (149.56 HP), Year of construction: 1999, Infeed opening: 720 x 200 mm Rotor diameter x width: 1,000 x 700 mm Max. feed size: up to 70 mm Bsdpfx Ajyxp Uujnuewr incl. discharge chute incl. hydraulic unit incl. approx. 2.5 t of spare and wear parts Optional: suitable steel construction available

Year of construction: 1991, condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 511 138K, Engine included. Bsdpszc Hp Aofx Anuswr Price upon request.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: CUM300/S-DSF, Netzsch condux grinding mill completely in original condition. Are herbs ground with it. motor: Siemens 22kw 40.5A 2945 RPM Mill: used at most 2 years in operation incl. grinding plate incl. grinding rotor incl. pipework intake and fall air Bwodpfoudygbox Anujr Lock: Coperion 150mm lock. hosokawa mill

Condition: like new (used), Manufacturer: Hazemag Year of manufacture: 2005 Bwedjwp Rhqopfx Anujr Type: AP-SA 1006 Jaw opening: approx. 690 x 515 mm Mill weight: approx. 4,600 kg unused

Condition: excellent (used), Manufacturer: Hazemag Type: SAP5 Jaw opening: approx. 1,000 x 1,500 mm Capacity: approx. 120–400 t/h Bodpfjxlrk Ajx Anuewr Weight: approx. 29,000 kg E-motor: 250 kW Siemens

Year of construction: 1980, condition: ready for operation (used), An Alpine fine impact mill from the chemical industry with an AEG motor is available. Rotor diameter: 630mm, grinding fineness range: 0.25mm-2mm, grinding capacity: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 2000mm/1400mm/2600mm, weight: approx. 800kg. Motor manufacturer: AEG, motor type: eAM 180 MR 4 Ex, year of manufacture: 1981, power: 15kW, speed: 1420rpm, power factor: 0.82, motor weight: 150kg. The conveying unit in the red frame is not for sale. An on-site inspection is possible. Bwjdpfx Anjyyy Nxsusr

Year of construction: 2021, condition: as good as new (ex-display), Rental Unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemical or mineral products. Materials up to approx. 3 Mohs can be processed on the UPZ. The 100 UPZ is the perfect mill for the laboratory, research and development of new materials or even small scale production. Thanks to the easy mill’s door opening, that doesn´t require disassemble of other system parts nor use of tools, grinding tools exchange or revision is very quick. It is fitted with a security device that prevents the opening of the machine while in operation. Motor power: 1.5 kW Bjdpfxjf H Azgj Anuewr Construction material: stainless steel

Year of construction: 2017, condition: like new (used), functionality: fully functional, machine/vehicle number: PII n. 1681, Impact Refiner Mill type P-II Feeding: the mill must be supplied in a regular, continuous, and consistent manner. Loading port on the front cover. Usable opening 305 x 250 mm. Cast iron housing with hinged front cover, equipped with a safety microswitch. Replaceable protective plates on the front and rear covers. Peripherally toothed grinding liners, cast in high-chromium alloy, with adjustable distance from the hammers. Disc rotor with 4 fixed high-mass hammers, cast in manganese steel. The rotor can be removed through the front cover. Shaft mounted on roller and ball bearings, grease-lubricated and protected by dustproof labyrinth seals. Perforated grid; the grid is removable through the front. Rotation speed: 1800-2400 rpm. Pulley for V-belts. Required power: 22-30 kW. Drive unit: 1 x 30 kW motor, pulley, belts, tensioner, and protective guard. Bsdpexrk Itofx Anuewr Support frame for mill and motor, complete with connection for aspirated discharge.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, overall weight: 3,600 kg, EDM MACHINE AGIE CHARMILLES AGIETRON IMPACT 3 WITH C AXIS TRAVEL X AXIS: 500 mm Bwedpfjy Rd Imex Anuor TRAVEL Y AXIS: 350 mm TRAVEL Z AXIS: 500 mm TRAVEL C AXIS: 360° TABLE SIZE: 800 x 600 mm TANK DIMENSIONS: 1100 x 730 x 400 mm ELECTRODE CHANGER: 28 POSITIONS ACCESSORIES: EROWA SYSTEM

Condition: new, Year of construction: 2025, functionality: fully functional, filter unit special for laser machines till 6 KW laser head Bwjdpfx Aotttfcenuor

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: Bsdpfoy Ecuzex Anuewr High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Bwodpfx Ajy Ecu Usnusr Technical Specifications: Model: RMZY Series (20 Bar Version) Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm Bsdpob A Ihdsfx Anuowr -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe Bwedpou Nf Nzsfx Anuer the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed and fly cutting movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. Bodpfx Ansx Rn Tmjujwr IDEAL for precision parts, thin sheets and small-medium size workpieces: ( up till 20 mm thickness steel ) • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2023, Technical specs CNC – 800 Control Syntec Drive system YASKAWA servo drive Main motor 7,5 Kw Spindle speed till 7000 Rpm Max drilling dept 800 mm Drilling diameter 2,5 till 30 mm X stroke 800 mm Y stroke 800 mm Z stroke 800 mm cutting feed 300 mm/min spindle speed 7000 Rpm spindle motor Servo 11 Kw X servo motor 3,9 Kw Y servo motor 3,9 Kw Z servo motor 3,1 Kw oil pump motor 5,5 Kw oil pressure 21 bar table loade 6000 kg machine weight 8,3 ton machine power 34 Kw. Machine size 4,2 x 3,5 x 2.6 meter Bwsdpfxjk N Dtus Anujr Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Bsdpfx Anoyut Dkjuowr Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Bwedsytd Scjpfx Anusr Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Bodjyhclwspfx Anuowr Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Bedpeu Nyxwjfx Anuswr Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, laser power: 1,500 W, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, This series from IMPACT is an economical, single-platform laser cutting machine. Its space-saving design makes it easy to load and unload the cutting table, which is accessible from all sides of the machine. Suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most sheets and is ideal for a wide range of industries. It ensures flexibility in your production, being very easy and quick to operate. We provide all the support you need to start production in a few days. TECHNICAL FEATURES: • Compact electrical cabinet, integrated into the machine construction to save space; • Large LCD operating panel and easy-to-use mobile arm support; • Remote technical troubleshooting - Equipped with internet connectivity; • Laser head with automatic focus and anti-collision functions; • Industrial components from renowned manufacturers with high reliability; • Access on both sides for dust carts; • Safety systems for operator and machine safety; • CE standard. TECHNICAL SPECIFICATIONS: Model: FM3015 Laser power: 1.5 kW (MAX source) Maximum cutting thickness (1.5 kW): STEEL: 12 mm / STAINLESS STEEL: 8 mm / AL: 4 mm Working area: 3,050*1,530 mm X/Y/Z axis travel: 1,530 / 3,050 / 100 mm Maximum load on machine table: 800 kg Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.03 mm Maximum speed: 80 m/min Acceleration speed: 0.8G Bjdpoxfiwyefx Anuewr Exhaust system: Included (with centrifugal motor fan) Laser source and head cooling system: Included Machine size (reference): 4,500*2,250*1,920 mm Total weight: 2,500 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, functionality: fully functional, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable around the vacuum lifter by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation Bedoytcnvspfx Anuswr include battery loader ( buster type ) include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal. price is for 300 kg lifter 600 kg lifter plus 300 euro 800 kg lifter plus 600 euro =>direct from stock. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: like new (used), 1 unused universal vertical milling head, suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 shank, quill stroke 100 mm, designed drive power approx. 3-4 kW, max. speed 2000 rpm, … Optional accessories: - Multiplier, gear ratio 1:4, ISO 40 shank Price: EUR 499.00 - Attachment for automatic feed device for the vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: EUR 1,880.00 - Cross milling head, additional head for the vertical milling head with spindle taper ISO 30, rotatable, 360 degrees Price: EUR 585.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Bwedpfx Ansddtwbouer Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Bwodjx Hkd Hepfx Anusr Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition