Used Pastry Shop for sale (3,074)

Condition: used, Year of construction: 2006, functionality: fully functional, Modular and scalable design Probable working width 600 mm Electrical supply 400 V Rated current 16 A Frequency 50 Hz – to be confirmed Output up to 7,500 pieces/hour Programmable control with touchscreen 50 memorizable programs Rex head according to configuration Weight range 35 to 85 g with Basic Rex Weight range 50 to 110 g with Basic Rex Pre-lamination before fermentation Resting pre-fermenter Optional pre-fermenter air conditioning Interchangeable stamping station Optional longitudinal cutting station RR forming station according to configuration WK-RR forming station according to configuration Seeding unit according to configuration Automatic depositing onto trays or belts Drive power 3.5 to 5.3 kW Fermenter air conditioning 4.4 kW Tjdpfx Acszp H Epo Tob Fermenter water 15 l/h maximum at 2 bar Seeding water 40 l/h at 2 bar Maximum height approximately 2,640 mm Used industrial line for rolls – König Combi Line The used König Combi Line is a modular line designed to automate the dividing, rounding, resting, shaping, and depositing of rolls. Its scalable design allows different modules to be combined according to the desired products, required output, and organization of the bakery. The nameplate identifies this equipment as a Combi Line manufactured by König Maschinen Kft. The visible machine number is 06.6.0070. The beginning of the configuration code appears to correspond to a 600 mm width version, but the complete composition of the line must be confirmed by an inventory of the modules present. Why this line stands out The Combi Line is based on a modular architecture, allowing the production of numerous formats from a single installation. Depending on its configuration, it can integrate a Rex dividing-rounding head, pre-lamination, a pre-fermenter, a stamping station, a forming station, a seeding unit, and an automatic depositing unit. This modularity facilitates the adaptation of the line to changes in production. Additional equipment can be added later without replacing the entire installation. Key advantages Modular and scalable design Automated production of many types of rolls Output of up to 9,000 pieces per hour Gentle dough handling with Rex heads Memorizable settings for different productions Quick tool changes for stamping Automatic depositing onto trays, belts, or boards Wide choice of shaping and finishing modules Seed recovery, limiting waste Easy access for cleaning and maintenance Products achievable depending on the configuration The Combi Line range allows the production of round, oval, flattened, laminated, stamped, cut, rolled, or seeded dough pieces. It is particularly suitable for hamburger buns, hot dog buns, milk bread rolls, Kaiser rolls, Kornspitz, decorated rolls, donuts, bocadillos, and long products such as half-baguettes. It can process wheat doughs, mixed doughs, cereal doughs, and various leavened doughs, provided they are compatible with the dividing head and installed tools.

Condition: excellent (used), Winyard Midifill MKII depositor Serial: MDS040740 Todpfsix Ivcex Ac Tob Stainless depositor, Rotary cut off depositing head, adjustable fill size, with foot pedal low level on wheels

Condition: excellent (used), The silo has been dismantled. Complete with suction motors and pipes. Membranes, control system. Tedpogh A Sgjfx Ac Tsb Flour silo made of steel/stainless steel. Capacity: 6.5 tons of flour. One silo for 3.5 tons. And one for 3 tons. We also have 3 x 25-ton Treviera silos, in excellent condition, complete with motors and pipes. These can be dismantled by the buyer. Please contact us in advance!

Year of construction: 2026, condition: new, functionality: fully functional, total length: 200 mm, total width: 500 mm, total height: 1,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, machine/vehicle number: 2026, Air conditioner / proofer air conditioner NEW Lillnord Model: PG 1000 Powerful with sophisticated technology for all fermentation rooms up to 6 sqm Temperature range +20 to 45 ° C adjustable via thermostat Humidity range 60 to 95% R.H. adjustable via hygrostat Automatic water regulation Tedpfjfvvnmex Ac Teb long lifetime! thanks to the proven "Lillnord system" Dimensions: 500 x 200 x 1700 mm, WxDxH DGUV V3 tested Connection 400V, 6.5 kW, 16A-CEE plug NEW device with 12 months warranty Come to our large bakery machine warehouse!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, GUTENBERG MASTER BAG 300X (2026) – PPWR-READY High-Speed Square-Bottom Paper Bag Machine High-speed, fully automatic roll-fed machine for producing square-bottom paper bags without handles. The MASTER BAG 300X is designed for industrial paper-bag manufacturers supplying food, bakery, retail, agricultural and European packaging markets. The PPWR-READY EDITION combines efficient bag production with controlled production recipes, approved-material management, batch traceability, waste monitoring and quality documentation. Main features Tjdpfx Acswzm I Ro Tjb Production speed: up to 180 bags/min Fully automatic roll-fed production Fully servo-driven control system Automatic paper feeding and tension control Precision tube forming and cutting Controlled side-seam and bottom gluing Automatic bottom folding and forming Automatic stacking and counting Multilingual HMI touchscreen Production of printed and unprinted bags Optional inline flexographic printing unit Suitable for approved kraft and coated-paper structures CE conformity for machinery safety PPWR-READY production package The machine can be configured to support the controlled production and documentation of paper bags designed for conformity with Regulation (EU) 2025/40 on Packaging and Packaging Waste—PPWR. Available functions include: Registration of paper supplier, grade and batch Recording of coatings, inks and adhesives Approved-material lists for each bag specification Password-protected production recipes Prevention of unauthorised material substitutions Customer, product and SKU identification Raw-material-to-finished-bag lot traceability Operator identification and production timestamps Paper, adhesive, waste and reject monitoring Recording of dimensional and bonding inspections Production batch and traceability reports Support for technical documentation requested by EU customers Barcode or QR-code material identification option Camera inspection and automatic reject options Suitable applications Flour, sugar, rice, pasta and grains Coffee, tea, spices, lentils and nuts Dried fruit and bakery products Bread, pastries and takeaway food Grocery and retail paper bags Seeds, animal feed and pet-food products Herbal products, powders and supplements Hardware and small industrial parts PPWR-READY acceptance test Final acceptance can be performed using the customer’s actual paper, coating, printing ink, adhesive, bag dimensions and intended filling weight. The test can confirm: Dimensional accuracy Side-seam and bottom integrity Stable production speed Glue consumption Waste percentage Production traceability Batch-report generation Important regulatory information The MASTER BAG 300X is a PPWR-ready production platform. Final PPWR conformity applies to each finished paper-bag specification and depends on the actual paper, coating, ink, adhesive, components, intended use and recycling pathway. Machine CE conformity covers machinery safety and is separate from PPWR conformity of the finished packaging. Model year: 2026Machine type: Square-bottom paper bag machineBag type: Without handlesMaximum speed: Up to 180 bags/minCondition/configuration: Available according to selected equipment package Contact us for price, complete technical specifications, material trials, factory acceptance testing, installation, and delivery conditions.

Condition: good (used), Canapa SAP 8 LA strapping machine Fully automatic strapping machine With integrated transport system - photoelectric cell controlled On the SAP-8A/LA fully automatic machines, photoelectric cells detect the start and end of the package, control the transport unit (driven rollers or belts), and trigger the strapping process. You can find more items – new and used – in our shop! Tedpfoxamfdex Ac Tjb International shipping costs on request!

Condition: excellent (used), Forklift Attachment Drum Gripper Suitable for 2 x 200 L steel ribbed/steel lid drums Description Firm hold even on uneven floors Sturdy, welded steel construction Forklift attachment module with robust powder coating in blue (RAL 5010) Quick, easy installation on the forklift Automatic locking when lifting the drum Automatic clamp release when setting down Securely holds steel ribbed and tension ring drums Height adjustable Technical Specifications Finish: Hot-dip galvanized Todpfx Aoxbq Iroc Teb Area of ​​application: Lifting/transporting steel drums Outer width [mm] 1050 Outer depth [mm] 1080 Outer height [mm] 975 Fork pocket spacing [mm] 730 Fork pocket W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate Description 1 2006/42 DECLARATION OF CONFORMITY Weight [kg] 110 Find more items - new and used - in our shop! International shipping costs on request!

Condition: reconditioned (used), functionality: fully functional, overall weight: 540 kg, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input current: 16 A, type of input current: three-phase, input frequency: 50 Hz, year of last overhaul: 2026, warranty duration: 6 months, DGUV certified until: 09/2027, Dough dividing and moulding machine Roll forming machine, top model Fortuna automatic machine, size 3+ Robust technology Head cleaning system, electrically operated, moving backwards Dough divider with 3 new moulding heads Tjdpfxow Hvygs Ac Teb Connection: 400V, 16A CEE plug Used machine, refurbished with warranty + spare parts service Optional: Platform or chassis Moulding heads Service package Delivery service Maintenance contract Spare parts box Training & commissioning We have a huge selection of dough dividers in stock!

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Todpsw N Np Sjfx Ac Teb Availability: on request Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Our service commitment to you: - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Year of construction: 2011, condition: good (used), Turbo D253P depositor 2011, Stainless, height adjustable frame, three pistons, with 12 mini shot depositing head with rotary cut off valve, height adjustable frame, mobile Tsdpfx Asr E Dllsc Tsb

Condition: refurbished (used), Diosna SP 160 AD spiral mixer with 2 bowls 160 kg dough suitable for all types of dough, thanks to the gentle kneading capacity in flour 100kg bowl contents 260 liter Tedjv Tk U Topfx Ac Tob tool drive 5.5/11 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Tsdpfxet Dmlfo Ac Teb Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS Tsdpfx Acjt Ei Huj Tsb faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: used, Year of construction: 2015, The Stago PB 2015 is a professional paper drilling machine that impresses with precision and durable construction, designed for use in print shops and bookbinding facilities. Key Features: - The Stago PB 2015 offers a user-friendly control panel and quick conversion for different paper formats. - The machine is distinguished by its high drilling capacity for thick stacks and adjustable drilling positions. Its solid construction and low-maintenance mechanics make it ideal for daily professional use. Technical Specifications: - Drill diameter to 15 mm - Maximum pile height: up to 50 mm - Drilling speed: up to 1,200 drillings per hour - Adjustable paper stops for precise positioning - Robust motor and durable drilling tool Tedpfxoxmgn Ee Ac Tjb All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1994, For Sale: Used Diosna double spiral mixer Type: W240A Year of manufacture: 1994 Included: 3 dough bowls W240 Tsdpfswlpnbex Ac Tob The mixer can be inspected at our location. Transportation can be arranged upon request. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland Everything is complete.

Condition: used, Year of construction: 2005, Horizon AFC-546 AKT is a proven 6-buckle folding machine designed for professional print shops and bookbinderies. It features "Touch & Work" technology that enables intuitive operation via a touchscreen. Special Features: - First folding unit with 6 pockets and a knife, plus a second folding unit with 2 pockets - Automatic fold roller adjustment for precise folds - 17 pre-programmed standard fold types - 100 memory slots for repeat jobs - Fully automatic knives in the first and second folding units Tjdpfx Aew Evc Esc Tob Technical Specifications: - Format range: 120 x 172 mm to 540 x 760 mm - Paper weight: 40–250 g/m² - Performance: up to 40,000 cycles per hour - Maximum stack height: 650 mm - Power supply: 400V / 50Hz, 2.7 kW - Dimensions: 2,780 x 1,050 x 1,680 mm - Weight: 1,350 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Tjdpfx Acezmh Awo Teb Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: Tsdpfx Acjzbvqgj Tob X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: as good as new (ex-display), Year of construction: 2022, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, UK Delivery Only Global S Green 07.07.05 Tsdozimrvjpfx Ac Tsb Shop Floor - additional bellows on the X & axis HH-AS8-T5 Automatic Indexing Probe Head (5° increments) HP-THDe High Definition Touch Trigger Probe Year of Manufacture: 2022 ISO 10360-2:2009: MPE(E0/E150)1) [18-22°C] 1.5+ L/333 MPE(E0/E150)1) [15-30°C] 1.5+ L/263

Condition: excellent (used), functionality: fully functional, overall weight: 49 kg, Ingredient cart Tsdpszq Uy Dofx Ac Teb with 9 ingredient containers with lids made of stainless steel with 4 swivel casters External dimensions approx.: 670 x 440 x 1850 mm Container dimensions approx.: 605 x 430 mm Used, cleaned

Condition: good (used), functionality: fully functional, input voltage: 400 V, empty load weight: 400 kg, input frequency: 50 Hz, overall weight: 400 kg, electrical fuse: 16 A, power: 5 kW (6.80 HP), Planetary mixer Model: H 600 Tedozq U Easpfx Ac Tsb with 3 speeds/power levels 60-liter stainless steel bowl with 1 beater and 1 dough hook Connection: 400V, 3A, 16-CEE plug Used machine

Year of construction: 2022, condition: good (used), Mech Masz LP01 Dough feeding hopper Tjdpfxszcg Hbj Ac Teb 2022, Stainless, Feeding hopper, chunker for continuous dough feed system, 160Kg stainless hopper, variable speed, auto or manual with foot pedal, 3Ph

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, REF: MM6450 1 x Comas MUFFIN LINE 8-lane depositor. Type-IS 800. Serial no. 3505. Date of manufacture – 2003). All equipment to be removed from the factory by the Buyer. Tsdpezcb E Sefx Ac Tsb

Condition: used, REF: MM6452 3 x Baker Perkins travelling ovens with 15m long x 1580mm wide belt. Tjdpfx Acszccfge Tsb NOTES: One of the ovens has a belt missing 12 x sections/lines. All equipment to be removed from the factory by the Buyer.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, milling spindle length: 30 mm, table length: 1,300 mm, input voltage: 400 V, input frequency: 50 Hz, For sale is a high-quality Felder KF 700 S Professional from the year 2023. This combination circular saw and routing machine combines two full-fledged professional machines into a space-saving unit and impresses with its high precision, robust construction, and proven Felder quality. The machine is in well-maintained used condition and is ready for immediate use. Thanks to the precise X-Roll format sliding table, the pivoting routing spindle, and the powerful 5.5 kW motor, the KF 700 S Professional is ideally suited for carpentry shops, joineries, furniture manufacturing, and professional interior finishing. Equipment: • X-Roll precision format sliding table • Pivoting circular saw unit • Pivoting routing spindle • Routing spindle quick-change system • Extension table with rip fence • Professional Felder equipment • Dust extraction connections for sawing and routing operations • Saw blade pivotable: 90° to 45° • Format sliding table: 2,500 mm • Rip fence: 2,600 mm • Routing spindle pivotable: 90° to 45° • Routing spindle Ø: 30 mm • Routing table opening: 230 mm Todpfszwmwhsx Ac Tob • Routing tool Ø max.: 230 mm Special equipment: • 008 7.5 HP motor • 010 Star-delta starter • 014 3-phase CEE socket for additional equipment • 139 On/off switch on the sliding table • 082 Preparation for adjustable slot tool • 071 Angle indicator for circular saw pivoting on the handwheel • 081 Circular saw blade guard, pivotable • 085 Electronic digital display on the circular saw fence with fine adjustment • 103 Routing spindle 30 mm, 115 mm usable height above the table • 110 Angle indicator for routing spindle pivoting on the handwheel • 161 Extension table 1500 for sliding table • 173 Angle grid index system for extension rip fence