Used Painting Room for sale (5,462)

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm table-size:460 x 800 mm spindle speeds:40 - 4000 U/min Hfsdpocxxwaefx Ag Ueb feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: Hjdoun R Ufepfx Ag Usfb After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: used, Year of construction: 2010, functionality: limited functionality, total width: 5,840 mm, total length: 15,700 mm, A combination of cooling and freezer cells from Dresdner Kühlanlagenbau is offered. The scope of the offer includes the cooling units and the electrical equipment. (Lighting, control cabinet, etc.) The cooling unit for the freezer area is unfortunately defective. The pallet racks shown in the pictures are not for sale. Hfodpfxotn U Rps Ag Ueb Size of cooling area (anteroom): 5.60m x 2.75m = 15.4m² Size of freezer area: 5.60m x 12.59m = 70.5m² Clear room height: 3.50m Insulation thickness: 120mm Further dimensions and information can be found in the attached PDF document. The unit is not dismantled and can be viewed at the production site in Thuringia by arrangement. Assistance with dismantling is possible by arrangement.

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Hedpopcgy Refx Ag Usfb

Condition: excellent (used), functionality: fully functional, Varnishing machine consisting of an automatic applicator and a drying tunnel. UV varnish application using rollers. Laying using an automatic stacker. Varnishing format B1+ Hfodpfowhdbnox Ag Usb

Condition: like new (used), functionality: fully functional, A cold storage room is offered, approximately 6 sq m without a refrigeration unit. Hjdpfxjvzk Rwj Ag Usfb Length: 3.9 meters Width: 2.4 meters High: 2.05 meters

Condition: used, machine/vehicle number: 28670, x-travel:ca. 400 mm y-travel:150 mm z-travel:340 mm surface area:600 x 210 mm T-slots:4 T - slots - width:12 mm spindle speeds::20 - 2000 U/min Hsdecxxlijpfx Ag Uofb turning speed range - vertical:60 - 1200 U/min turning speed range - horizontal:95 - 1900 U/min speed steps work spindle:12 feed range:10 - 500 mm/min feed steps:10 spindle taper:MK 4 quill stroke vertical:60 mm total power requirement:1,7 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,9 x 1,05 x 1,55 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used Hfjdpoun R N Aofx Ag Usb 🚧 Very low installation height

Condition: good (used), We offer guns , cabins , complete plants , used and reconditioned Hedpfx Agori R Rlj Ujfb

Year of construction: 1995, condition: used, Water-based painting system complete with 865 linear meter chain with tracks, Sames reciprocators with rotating cups, generators, painting pumps, chart tables and accessories Hfedpsit Rrvofx Ag Usb

Condition: used, Year of construction: 2003, x-travel:760 mm y-travel:290 mm z-travel:370 mm turning speeds:60 - 4200 U/min table::750 x 230 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,13 mm/U feed range:19 - 890 (x) mm/min spindle cone:SK 30 Hfedpfxst U Rm Us Ag Ujb column arm:171 - 476 mm total power requirement:2,4 kVA weight of the machine ca.:0,95 t dimensions of the machine ca.:2,05 x 1,63 x 2,07 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions Hsdpfx Asun Shgsg Usfb The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: used, Aerial painting chain by Tecnoaspirazioni, complete with tow, tracks and poles. Length approximately 220/240 m. Hodpfx Agjit Umfo Ujfb

Condition: used, Year of construction: 1985, machine/vehicle number: 31268, x-travel:850 mm y-travel:700 mm z-travel:600 mm quill stroke:115 mm table surface area:900x700 mm spindle turning speed range:30-6000 U/min spindle taper:SK 50 control:Sinumerik 3 M feed speeds:0-6000 mm/min spindle motor:7,5 kW total power requirement:32 kW weight of the machine ca.:6,6 t dimensions of the machine ca.:3,8 x 1,8 x 2,9 m The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Rotary Work Table - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 7.5 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray Hjdpfx Agjcxxwgj Usfb

Condition: used, Promac brand paint machine, model S.3P.3L, consisting of paint pump, 3 paint guns, 3 UV lamps for drying and transport tape from 6200 x 10 mm, command panel, timers and 'manual/automatic' drives. Promac brand painting machine, model S.3P.3L, consisting of a painting pump, 3 painting guns, 3 UV lamps for drying and a 6200 x 10 mm conveyor belt, control panel, timers and “manual/automatic” drives. Hedpfx Agjivurxo Usfb

Condition: used, Year of construction: 1986, machine/vehicle number: 2204-0929, x-travel:560 mm y-travel:500 mm z-travel:450 / 390 mm quill stroke:80 mm feed:2 - 3600 mm/min table surface area:800 x 460 mm spindle turning speed range:40 - 4000 U/min spindle taper ISO:ST40 spindle head swivable left - right:+/- 90 ° control:Contour 2 total power requirement:4,0 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:2,0 x 2,5 x 2,2 m Hjdpfx Ajcxxrieg Ujfb The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin, Chip tray

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm Hjdpscxxntofx Ag Ujfb z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: used, machine/vehicle number: 52326/08, x-travel:250 mm Hjdpfxocxxrvo Ag Ujfb y-travel:150 mm z-travel:305 mm table surface area:600 x 210 mm spindle speeds:40 - 2000 U/min spindle turning speed range:16 spindle taper:SK 40 feed:10 - 500 mm/min feed steps:16 vertical head swivelling:+/- 90 Grad total power requirement:1,0 / 1,4 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:1,0 x 1,25 x 0,85 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table ( Tilt and Turn ) - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40 - Seperate power cabin

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Hfodpfxscxxp Ts Ag Uob Chip tray and Splash Gaurd

Condition: used, x-travel:600 mm y-travel:400 mm z-travel:640 mm Hodpjcxxx Tjfx Ag Usfb turning speeds:30 - 1800 U/min table surface area:880 X 495 mm total power requirement:4 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,2 x 1,8 x 2,1 m

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min Hsdpfxscxxyhj Ag Usfb feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm table-size:700 x 470 mm spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Hfsdecxxypopfx Ag Usb Deckel FP3 NC Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin

Condition: used, Year of construction: 1989, machine/vehicle number: 0153, x-travel:400 mm y-travel:300 mm z-travel:400 mm turning speeds:40 - 2000 U/min table::750 x 320 quill stroke:60 mm thickness of jaw:160 mm feed range:10 - 500 mm/min spindle cone:SK 40 Hedpfx Aocxxvqog Uofb weight of the machine ca.:2 t dimensions of the machine ca.:1,22 x 1,81 x 1,71 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: used, machine/vehicle number: 2801-0234, x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min spindle taper:SK 40 milling-head swivable +/-:90° quill stroke:60 mm total power requirement:1,09 / 2,0 / 4,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,3 x 1,1 x 1,6 cm m Deckel FP2 NC Milling Machines. Hfjdpjcxxm Eofx Ag Usb - Spilndle Head can be swiveled left or Right (90 °) - Angular Fixed Work Table: 620 x 390 mm (Max. Load 250 kg) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic handwheel for Easy Axis movement - Deckel Dialog 4 CNC control Systems - Mechanical hand-wheels for all axes to operate manually, Central Lubricant system, Chip tray with Splash cabin

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm Hfjdpfscxxpqjx Ag Ujb control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m