Used Overbelt for sale (52)

Year of construction: 2017, condition: excellent (used), machine/vehicle number: PO3503522, very high capacity overbelt magnet length overall = 3610 +0/-100 | magnets = 1600+800 width overall = 2240 | belt = 1600 | cleats = 1500 height = 1120 weight = ca 8000kg electro pick up magnet 10kW, enclosed, oil cooled belt drive SEW, 5,5kW Dkjdpfx Asivdg Dja Hot belt speed 1.35m/s

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Dkedpfsvyuy Hox Aa Hst Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension Dksdpfxjpcf Ete Aa Hjt

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Dkjdpshun Uiofx Aa Hst Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Year of construction: 2020, condition: new, Overband plate magnet from remaining stock / overproduction. Made of stainless steel 1.4301, hermetically sealed. For sale is a plate magnet with threaded holes on the back. The magnet can be used either as a "police magnet" or for filtering out metal contaminants above a conveyor belt. Ring eyes for suspension are included. Dimensions of the magnet block: Dedpfx Aaofktk No Hjkt 800 x 500 x 180 mm Only 1 piece available for immediate delivery. Many other sizes available in stock.

Year of construction: 2020, condition: new, Overband plate magnet from remaining stock / overproduction Dkodpfx Aaofktk Ro Hot Manufactured from stainless steel 1.4301, hermetically sealed. For sale is a plate magnet with threaded holes on the back. The magnet can be used either as a “police magnet” or to filter out metal contaminants above a conveyor belt. Ring eyes for suspension are included. Dimensions of the magnet block: 600 x 500 x 180 mm Only 2 units are available for short-term delivery. Many other dimensions are available from stock.

Year of construction: 2020, condition: like new (used), Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet Permanent overbelt magnetic separator TYPE PEM1800 1800x1000x400mm ===== 4x ring screw for suspension Magnet dimensions: 800x500x180mm Dsdpfjhun Uujx Aa Hekt PU conveyor belt with hard cover, matt black Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-65 Three-phase gear motor GEMOTEG 1.1KW Cladding: RAL 5015 Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnetic separator TYPE DMPM1200 1.800 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnetabmessungen: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with tension bearings. Drive: GEMOTEG shaft-mounted geared motor 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz Protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply especially transversely stable Djdpfxotxn Iro Aa Hjkt * equipped with stainless alligator connectors RS125 Magnetic properties: Built-in magnetic core: Strontium ferrite Y30 Bonded SfRe strontium hard ferrite magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole pieces tightly closed and sealed.

Condition: ready for operation (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM1400 2.000 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 1.400x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 10 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Dsdpfx Aajhun U Ue Hjkt Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Dsdpfx Aasd Dy Uge Hskt Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2026, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Dkedpfx Aashupkmj Hst Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, overall weight: 20,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C7.1, Shafts with 7/7 discs, each with 5 knives Crushing bar with comb Robust hooklift frame Wheel axle with drawbar Permanent overbelt magnet Dkodpfx Ajzh Hgwsa Het Water spray system

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Dodpfx Aoznmpxoa Hekt Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: used, Magnetic Separator, Overbelt Magnetic Separator, Ferrous Metal Sorting Conveyor, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 508395 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 600 mm Overall dimensions: 2480 × 1630 × 1100 mm Design / Material: Robust industrial steel frame, with internal high-performance magnetic block and discharge conveyor belt Dodpfxjzv S Nae Aa Hskt Conveyable / Separable material: Extraction and separation of magnetic ferrous metals (steel, iron, fasteners, structural parts) from bulk material flows (waste, e-waste, shredder residue, glass, construction rubble, wood chips) or any type of material from which magnetic particles/materials need to be separated

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Dodpfx Aed Dy S Rea Hskt Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. Dkjdpfx Aodubpuoa Het dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dkedpfx Aegbpm Tsa Het Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet Dkedpfx Aaefhql Ts Hjt with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. Djdegbkkrjpfx Aa Hekt - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, Dkodpfx Aedv Eu Hea Het - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, Year of construction: 2021, operating hours: 4,856 h, functionality: fully functional, Equipment: Basic package Inventhor 6: - Load-Sensing System - Fuel tank (500 liters) - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally positioned lubrication strips - 24 V electro-control with additional electric pump for operation of the following functions when engine is off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GFRP (fiberglass reinforced plastic) service doors - Service-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Service ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: Drive System * CAT diesel engine C9.3B, 310 kW at 1,800 rpm, complies with EUROMOT V emission standard * Roller drive via planetary gearbox 310 kW (VARIO) 400 mm Track Chassis Unit - Track chassis with 2 travel speeds - Track width: 400 mm, triple bar - Drive via chassis gearbox with variable motor - Total weight approx. 24,000 kg Shredding system Size "L" complete (Variomat System L 600/4 - 30 teeth) Additional comb bar Size "L" complete, with 14 comb teeth Size "L" limiter (7 pieces), incl. mounting bar and fastening material Additional hydraulic connection 35 l/min to 80 l/min Djdoywyuispfx Aa Hskt 400 mm flat track chassis Right-hand side door protector panel complete Left-hand side door protector panel complete Three-sided hopper extension H=350 mm Rear conveyor 4.9 m, 1,000 mm wide, hydraulically foldable, with anti-magnetic center section Overbelt magnet - Neodymium Frame for overbelt magnet Delivery date upon agreement

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Djdpfx Aajxrn Hgj Hskt Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Djdpfx Aoxdwiusa Hjkt Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, power: 405.26 kW (551.00 HP), Mobile shredder on crawler chassis. Diesel engine: 551 HP Folding discharge conveyor Overbelt magnet (neodymium) Radio remote control Dodpfsu R Uaxex Aa Hekt Detailed description: see pdf-file

Condition: used, power: 328 kW (445.96 HP), first registration: 01/2023, Specification: Category: Universal Waste Shredder Manufacturer: Komptech Serial/Reference Number: 481148 Designation: Terminator 5000 S Year of Manufacture: 2023 Operating Hours: approx. 889 hours Power: 446 HP / 328 kW Weight: 27,000 kg Emissions Standard: Tier 4 Final / Stage V. Equipment and Description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-shredding unit Armoured rollers ? new sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control Dksdpjxqqfcefx Aa Hot