Used Operating Instructions for sale (30,994)

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine Itodpfozu Tu Isx Akpsn - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: used, Year of construction: 2023, operating hours: 447 h, power: 183 kW (248.81 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, Technical Data ----Engine * DEUTZ TCD 6.1 L06 4V, Emission Stage V (Tier 5) * 6 cylinders, 6057 cm³ displacement * SCR system, EGR, passive DPF * Rated speed: 2100 rpm Itjdpfx Ajzu U Snskpen * Power at rated speed: 237 hp / 174.4 kW * Max. power: 247 hp / 181.3 kW * Electronically controlled Visco fan "eVisco" ----Transmission * TTV transmission T7780 (continuously variable), two automatically switched driving ranges * PowerZero, adjustable Powershuttle * Four driving strategies: Auto+, Auto, PTO, Manual * Three electronically switched rear PTO speeds (540E/1000/1000E) ----Hydraulics & Lifting System * Load-sensing variable displacement pump, 210 l/min flow rate * 5 additional control valves, electro-hydraulic, flow and time control * Rear lift with electronic control (EHR), 11,100 kg lifting force * Front lift with double-acting cylinders, 5480 kg lifting force * Duo front PTO shaft 1000/1000 ECO 1/min, electro-hydraulically switchable * Hydraulic lower link stabilization ----Tires * Front: 600/70R30 * Rear: 710/70R42 * Brand: Trelleborg ----Brakes & Axles * Braked front axle, sprung, ASM 100% differential lock * Two-circuit air brake system * Engine brake in combination with air brake system Equipment ----Cab & Comfort * MaxiVisionPro cab, pneumatically suspended, automatic climate control * Seat Max-Comfort Dynamic MSG97AL DOS EVO, swiveling, air-conditioned * Passenger seat upholstered with seat belt * DAB+ High Level radio, Bluetooth, USB, hands-free function * InfoCenterPro with 5" TFT color display * iMonitor3 in 12" (incl. TC-SC, GEO, VRC, AUX-N, UT, ISOXML) * XLarge Vision: Electrically adjustable & heated XL telescopic rear mirrors * Roof hatch with UV coating * Various LED work lights (a total of 8 on the roof, more on the hood and fenders) * Dirt-repellent floor mat, bracket for external monitor ----Electronics & Connectivity * CTM 1.2, Connectivity package for 1 year * AGROSKY Performance Steering ready with "EASY STEER" * Preparation for ISOBUS implement control (ISO 11783) * GNSS receiver SR20 PRO for RTK NTRIP (Galileo/GPS/Glonass) ----Special Equipment & Design * Warrior Equipment: lettering, LED headlights, muffler with stainless steel trim * Equipment "WARRIOR MATT BLACK" * Driver's seat Max-Comfort XXL partial leather * Chrome grille over exhaust pipe * 50 km/h Super-Eco, 50 km/h ECO Germany ----Further Features * Various sockets (e.g. for trailers with ABS, 7-pole for implements) * Automatic trailer hitch, height-adjustable * Trailer drawbar long ball K80, forced steering K50 * Various toolboxes, operating manual, maintenance and safety instructions ----Vehicle Number 9378-----Errors and prior sale excepted

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 Iedpfozukurjx Akpetn - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation. Itodpjzz Hg Rofx Akpon

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Itedpoz Duhxjfx Akpen Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Iodpfx Akjz N Sd Njpotn Machine available immediately 12-month warranty.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight. Itodpfxozx Efts Akpsn

Condition: new, I - beam section - flat steel 100 x 15 (d 450) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50 x 6 (d 1000) mm round material 35.0 (d 600) mm bar material dia. max. 70 x 2 (d 1000) mm square material 50 x 50 x 3 mm bending speed 4.5 m/min roll diam. toproll 155 mm bore 50.0 mm total power requirement 1.5 kW weight 400 kg range L-W-H 990 x 750 x 1350 mm Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity Itsdpfxjzx Hd Rs Akpen - operating instructions in German

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 10/2026, fuel type: diesel, overall weight: 7,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Are you looking for a different model, different engine, different dimensions, or something else? Please feel free to contact us. We offer financing and leasing at attractive conditions - also for the Netherlands, Austria, and for new businesses! ----VEHICLE * New model MY26 * Wheelbase: 3750mm * Double cab * Manual transmission * Twin tires on rear axle * Gross vehicle weight 7.0 tons UPHOLSTERY * Fabric seat covers * 4-seater bench in the passenger compartment ELECTRICS/LIGHTING ConnectivityBox 4G * Daytime running light function * Event data recorder * Digital tachograph (EU standard) 4.1 * Battery 12 V 105 Ah (AGM) * Light and rain sensor * Manual high beam control * Additional speed limiter * Switch for body lighting * Trailer socket 12V 13-pin CAB EXTERIOR Mirrors for body width 2350 mm * Wide wheel arch trim * Blind spot radar behind the cab * Fuel filler neck in B-pillar * Turning assistant passenger side (BSIS) * Tire pressure monitoring system (TPMS) * Front detection system (MOIS) * Proactive steering assistant with lane keeping assist (ELK) * Emergency brake assist AEBS with City Brake * Electrically adjustable and heated exterior mirrors * Splash guards on front axle * Additional vehicle key with remote control CAB INTERIOR/AUDIO Extended driver attention warning system (Advanced Driver Distraction Warning) * Central locking with remote control * Grab handle on A-pillar * Traffic sign recognition with intelligent speed assist (ISA) * Electric windows for front doors * Left-hand drive for right-hand traffic * Front airbags for driver and passenger with seatbelt pretensioners * Preparation for alcohol interlock system * Speed limiter 90 km/h * Roof storage compartment above windshield * Smoker's package, ashtray and cigarette lighter * 12V connection for windshield OBU CHASSIS Spare wheel storage at the end of the frame * AdBlue tank 20 liters under the cab * Trailer load 3.5 t * Weight variant 2500/5350 kg * Spare wheel, dimension corresponds to vehicle tires * Rear underrun protection * ESP system * Steel rims * Fuel tank 90l integrated * Parking brake manual, centrally located * Standard suspension, front axle * Trailer coupling ball head ENGINE/TRANSMISSION/AXLES * Preparation for auxiliary drive * Rear axle ratio i 4.23 * Oil pan standard * Radiator in aluminum * Emission standard EURO VI E * Crankcase ventilation heated * Start strategy standard * Engine speed 3500/min * Diesel particulate filter * Settings for special fuels (HVO/GTL) * Heated fuel filter * Comfort noise insulation * Manual transmission FT 50.6 * Generator 3500 Watts (14 Volt x 250 Ampere) * Operating instructions in German * 4x2 MY24 * Generic tire * Tires 225/75 R 16 All Season * Operating and maintenance manual electronic COMFORT PLUS USB socket on driver and passenger side * My Iveco infotainment 10 inches with navigation * Voice assistant Alexa integrated * Bench seat for passenger with multi-function storage and stowage compartment * Fog lights * Air conditioning with automatic climate control as well as pollen filter and outside temperature display * Adaptive cruise control (ACC) * Air conditioning compressor 170ccm * Comfort headrests WINTER * Seat heating for heated seats * Auxiliary hot water heater * Luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and longitudinal direction, hydraulically sprung, heated Isdpfxszwrxwo Akpstn * Windshield heater

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: Itsdpfxozw Uh Uo Akpen The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. -Complete user and maintenance manual (including parts list and programming instructions). SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Ijdozyx Nbopfx Akpotn Includes hand-held remote control. Faceplate diameter: 1000 mm. Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Efficient and precise cutting with high ease of operation thanks to the electromotive adjustment of the main saw blade (height/angle) and the parallel fence. Powerful motor, speed up to 5,000 rpm, scoring saw speed up to 8,000 rpm. Double roller carriage, the heart of the panel saw, smooth-running and durable. Cutting length max. 3,200 mm Safe operation thanks to proven safety devices. Equipment: Machine frame: Torsionally rigid and self-supporting guarantees the necessary smooth running and stability Control: PLC control Electromotive height adjustment and tilt 0-45° for the main and scoring saw blade via push and hold button. Saw unit: Powerful motors for excellent cutting performance Drive power/speed of the main saw spindle with automatic brake Main saw motor 7 kW, speed adjustment by switching over the drive belt, speeds 5,000 / 4,000 / 3,000 rpm Speed of the scoring saw 8,000 rpm Quick-change system for the main saw blade Saw blade angle is displayed numerically Double roller carriage: Linear, round guide rails ensure a precise and durable system with high-quality cutting results and a long service life Small rollers inside the carriage guarantee smooth sliding during cutting incl. upper carriage locking Carriage length 3,200 mm Parallel fence: max. width 1,250 mm with electromotive adjustment removable fence High-quality work table made of robust sheet steel guarantees high rigidity Safety zone starts approx. 200 mm in front of the saw blade Crosscut fence: Cross position of the panel is displayed numerically with telescopic device for cuts up to 3,100 mm and 90° guarantee Robust, gap-free flap units are easy to move Fence ruler is removable Cutting to length on the crosscut fence on the sliding carriage 3 digital displays with fine adjustment for high repeatability Display up to max. 3,200 mm Extraction: to prevent flying chips and dust protects the operator from hazards Table extension and table widening Design: Clamping shoe, sliding stick, sliding and return handle Miter stop for manual mounting on the sliding carriage Technical data: Main saw: Saw blade diameter 400 mm, speed 3,000/4,000/5,000 rpm, motor 7 kW S1 Scoring saw: Saw blade diameter 120 mm, speed 8,000 rpm, motor 0.75 kW S1 Saw blade tilt 0-45° Max. cutting depth at 45°: 85 mm Max. cutting depth at 90°: 125 mm Parallel fence: max. 1,250 mm Sliding carriage: 3,200 x 418 mm Max. cutting capacity: 3,200 mm Height adjustment: electromotive Angle adjustment: electromotive Itedpfx Asz Dwftskpsn Table size: 1,020 (690+720) mm Extraction: Diameter 100 mm Space requirement: 6,700 x 3,900 x 1,890 mm CE marking in accordance with EU directives including documentation and maintenance instructions Saw blades are not included in the scope of delivery.

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Ijdpfjz Dtaaex Akpstn Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system Itjdpfx Ajz Daukokpsn We experienced an issue with the scale, which was resolved after replacing the power supply. During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge Itsdpfsz Hd R Iox Akpen * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Year of construction: 2019, condition: like new (used), functionality: fully functional, DESI-14 Industrial Fine Grinding & Micronization System Complete Industrial Production Line – Excellent Condition Complete industrial grinding and micronization system based on the DESI-14 high-speed disintegrator, designed for intensive particle-size reduction and production of fine powders. Manufactured in 2019 by Desintegraator Tootmise OÜ, Estonia, this particular grinding and activating unit was manufactured for the grinding and activation of natural zeolite. The system combines the DESI-14 disintegrator with controlled material feeding, two-stage cyclone separation, automatic air filtration, product conveying and big-bag discharge, providing a complete industrial grinding line. Final particle-size distribution and processing capacity depend on the characteristics of the processed material, feed rate, required fineness and operating parameters. According to the manufacturer's operating instructions, throughput can be adjusted and increased where the required product fineness and motor load permit. Proven Factory Performance During the manufacturer's factory test using calcium carbonate (CaCO₃), the system achieved: Throughput: 1,000 kg/h Final product: 92% of particles below 30 μm Feed particle size: below 100 μm Feed moisture: 2% This provides documented factory performance under the stated test conditions. Actual throughput and final particle-size distribution depend on the processed material, required fineness and operating parameters. Itjdpfezy Nbhox Akpen Technical Specifications Manufacturer: Desintegraator Tootmise OÜ, Estonia Model: DESI-14 Year of manufacture: 2019 Technology: High-speed impact disintegrator Rotor configuration: 6-row rotor set Rotor sets included: 2 complete sets, each consisting of 2 rotors Rotor speed: approx. 2,965 rpm Main drives: 2 × 30 kW electric motors Maximum total installed power: 80 kW Power supply: 3N, 50 Hz, 380 V Wear protection: Working surfaces of the rotor impact elements protected with HARD 60 wear-resistant alloy Cooling: Water-cooled housing and cover Maximum airflow through grinding unit: 1,000 m³/h Maximum feed moisture: 2% Maximum feed temperature: 50°C Electrical protection: IP54 / IP55 DESI-14 Disintegrator Dimensions: 1,570 × 1,160 × 1,300 mm Net weight: 850 kg Complete Grinding Line Installation dimensions: approx. 6,000 × 5,200 × 4,000 mm Gross weight: approx. 2,700 kg Feed hopper volume: 1.5 m³ Complete System Includes DESI-14 disintegrator on frame, 2 complete rotor sets,1.5 m³ feed hopper, WAM screw feeder, First-stage cyclone, Second-stage cyclone with hopper, 3 rotary valves, WAM screw conveyors, WAMFLO automatic air filtration system Exhaust fan, Diverter flap valve for big-bag filling, Control board, Supporting steel structures, Connecting channels and components The grinding system is designed as an integrated production line: material is fed into the DESI-14, ground material is transported through the air stream into the cyclone separation system, and the remaining fine material is captured by the automatic air filter. The finished product is then conveyed towards the big-bag discharge system. Machine Condition & Availability Condition: Excellent and fully operational Location: Zagreb, Croatia Availability: Immediately available

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option Isdpfx Asxaa Hnjkpjtn - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: new, saw blade diameter 0 x 30 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 190x100 / 230x50 mm capacity degrees: round 110 mm capacity degrees: square 95 x 95 mm capacity degrees: flat 130 x mm turning speeds 2800 U/min mitre joint cuts -/+ degrees total power requirement 2.2 kW weight of the machine ca. 2 kg range L-W-H 1600 x 750 x 1000 mm Features: - Semi-automatic high-performance circular saw (underfloor) * For cuts from ° right to ° left * In aluminum and light metal alloys * With rising saw blade - Manually opening safety guard (optionally with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) Itodpfexaa Hujx Akpsn - Heavy-duty cast iron construction ensures vibration-free . operation and maximum precision - Large bearing-mounted rotary table with internal indexing at 0/° * Ensures quick adjustment for miter cuts - Extraction nozzle for connecting a chip extraction system Scope of delivery: - 2 pneumatic vertical vices with quick adjustment - Tool set - Detailed operating instructions, maintenance manual, etc. - Blow-out gun - Machine is delivered without a saw blade!

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: round 120 mm vice 285 mm turning speed range: 36 / 72 m/min Ijdpfxjxaa H Is Akpstn saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 370 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 17900 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Itedpfjyycwxex Akpsn Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: lighting, For sale: a BUMEX brand dry paint booth, model TUXXYY, manufactured in 2019 and in perfect working order. This booth is designed for the application of lacquers and paints, both water-based and solvent-based, and complies with all European safety and quality regulations. It is the ideal solution for automotive workshops, metalworking shops, or any industry requiring a professional and safe finish. It includes complete technical documentation (installation, safety, and maintenance manual) and a delivery protocol. Iedpfsz Riuzjx Akpotn Key technical features: - Brand: BUMEX (F.H.U.) - Model: TUXXYY (Dry paint booth) - Year of manufacture: 2019 - Total power: 2.0 - 3.5 kW - Supply voltage: 230/400 V (50 Hz) – Single-phase and three-phase - Protection rating: IP-65 (IP-56 in control cabinet) - Filtration system: Double-stage with Andrea paper filter and G4 fiber filter (PaintStop). - Extraction fan: Included for removing excess paint. - Construction: Galvanized sheet metal (stainless steel option available). - Regulatory compliance: ISO 9001:2015 certified, CE marking. - Applicable standards: PN-EN 12215, PN-EN 60204-1, PN-EN 1127-1 (safety in explosive atmospheres). Condition and maintenance: - Condition: Excellent condition. Operation verified. - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter and electrical connection inspection). - Includes: Original documentation (Instruction Manual, Delivery Protocol), filters Important notes (according to the manual): - Requires installation in a location with adequate ventilation, a minimum temperature of +10°C, and effective grounding. - Designed for use in Zone 2 (potentially explosive atmospheres), complying with the required safety measures.

Year of construction: 2021, condition: like new (used), For sale: ANEST IWATA brand professional spray gun washing machine, models IWK SOL-B and IWK SOL-C (Model SLB/SLC), in perfect working condition. This equipment is designed for automatic and manual cleaning of spray guns and small components, using thinner, water, or water-based detergents. It is the ideal solution for paint shops, automotive repair shops, metalworking shops, or any industry that requires quick, safe, and efficient cleaning of spraying equipment. It includes complete technical documentation and CE certification. Key technical specifications: - Brand: ANEST IWATA (ANEST IWATA Europe S.r.l.) - Model: IWK SOL-B / IWK SOL-C (Model SLB / SLC) - Function: Automatic/manual washing of spray guns and containers up to 5 L. - Washing products: Thinner, clean water, or water-based detergents (pH 6.5 - 12). - Tank capacity: 25 liters per container (2 containers: clean and dirty). - Weight: 42 kg - Dimensions: 1100 mm (height) x 450 mm (width) x 660 mm (depth). - Maximum operating pressure: 10 bar. - Operating pressure: 6 - 10 bar (recommended: 8 bar). - Air consumption: 15.7 Nm³/h (at 8 bar). - Sound level: 77.7 dB (A) - Equivalent average level. - Certification: CE marking, CE declaration of conformity. - ATEX compliance: Group II, Category 2 G (Zone 1), suitable for potentially explosive atmospheres. - Applicable standards: Directive 98/37/EC (Machinery Safety), Directive 94/9/EC (ATEX), EN 12921-1/2/3, EN 13463-1, among others. Features and advantages: - Efficient washing system: Includes a pneumatic membrane pump for clean and dirty detergents, a programmable timer, and vapor extraction nozzles. - Integrated safety: Safety valve that locks the pump when the door is opened, preventing splashing. External grounding to prevent electrostatic charges. - Easy maintenance: Robust design in stainless steel and galvanized steel. Accessible air and detergent inlet filters. - Versatility: Compatible with suction-feed and gravity-feed guns, with cup mounted or detached. - Model IWK SOL-C: Includes an automatic final wash function activated by a control button. Ijdpjz Rivxsfx Akpetn Condition and maintenance: - Condition: New (never used) - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter cleaning, lubrication of the pneumatic system, pump inspection). Includes: Original documentation (User and Maintenance Manual, CE Declaration of Conformity).

Condition: ready for operation (used), Year of construction: 2003, pressure 35.0 t chamfer lenght 1250 mm distance between columns 1095 mm stroke - stepless adjustable 215 mm column arm 410 mm table height 800 mm Itjdpfx Aox Dc Uvskpon dayligth 455 mm working feed 10.0 mm/sec return speed 56.0 mm/sec work height max. ca. 875 mm Control DM 51 Number of working hours ~ 13.300 h oil volume 80.0 l operating pressure max. 240 bar voltage 380 V total power requirement 4.0 kW weight 2500 kg range L-W-H 1700 x 1450 x 2250 mm - in checked conditions - machinevideo - ?v=Gn6PZEMmnmY Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit “DM 51” * Positioning of the backgauge (X axis) * Positioning of the depth adjustment (Y1+Y2 axis) * Program + tool storage possible * Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1x split set of Multi V tools - bottom (16/22/35/50 mm) - Side safety device (swivel doors) + FIESSLER laser safety device - Rear safety device (swivel door) - 1x freely movable double foot switch - 2x front support arms - Machine operating instructions + CE declaration

Condition: new, functionality: fully functional, machine/vehicle number: 60.21.287, This is a tray rack trolley from the premium manufacturer Rational, suitable for combi-steamers of size 20-1/1. The tray rack trolley offers space for 15 x 1/1GN containers. With a rail spacing of 84 mm, you may achieve better utilization when loading compared to the tray rack trolley with 20 slots. Rational article number: 60.21.287 The recommended retail price (RRP), gross, is: €2528, our special price: €1399 gross. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational equipment type? Ask us, we have access to a large selection of used and new equipment. We will be happy to advise you on all equipment types. Our used equipment service for you: * 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs * High-quality branded equipment at fair prices * Professional refurbishment / inspection & expert cleaning * Tested & fully functional - or your money back * Flexible shipping or self-collection options * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * L x W x H: 824 x 561 x 1743 mm * Clearance from the lowest tray to the oven opening: 142 mm * Clearance from the top tray to the oven opening: 131 mm * Max. tray height: 1.60 m Isdeyfuhrjpfx Akpetn * Weight: 34.9 kg * Material: Stainless steel * Article number: 60.21.287 Condition: New Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would like advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Isdpfsyiz R Uox Akpjtn Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours