Used Okuma Lt 2000 for sale (235)

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Kdsdpfxeyt Nvts Ampek Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: OKUMA, controller model: OSP E-100M, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Ksdpfx Aox D Nlzempsdk Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Kdodpfx Aoyyk I Esmpok Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Year of construction: 2006, 3-axis machining center Okuma MB-66 VA Control: OSP-P 200M Year of manufacture: 2006 Internal machine no.: 31 X-axis: 1,500 mm Y-axis: 660 mm Z-axis: 660 mm Kedpfxoylwp Ss Ampodk Tool holder: SK 40 MASBT Tool magazine: 32 positions Spindle speed: 8,000 rpm Equipment: ONE touch IGF Hinged belt chip conveyor Electronic handwheel Internal coolant supply 20 bar

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Kjdpfsku Aaaex Ampsdk Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, turning length: 565 mm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 1,824 mm, total length: 2,800 mm, total width: 1,790 mm, CNC Lathe with c-axis Okuma - LB3000EX-II MACH-ID 9471 Make: Okuma Type: LB3000EX-II Control: OSP-P300LA Year: 2018 Tooling package with Tool Holders Axial driven live tools holders Radial driven live tools holders Kodpsywurpefx Ampjdk Kitagawa B210 3 Power Chuck Max. turning Ø: 580mm X-Axis: 260mm Z-Axis: 565mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 4566H Pinole taper: 5Mk Length: 2800mm Width: 1790mm Height: 1824mm Weight: 4350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, CNC Lathe Okuma LU 3000 M2SC 1000 / Demonstration Machine Control: OSP-P300LA Year of manufacture: 2023 Spindle hours: approx. 50 h Internal machine no.: 29 Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed: 5 - 5,000 rpm Tooling: VDI 40 2 pcs. tool turrets Kdodeyk Sf Sjpfx Ampjk A-turret: 12 tool stations / all stations driven B-turret: 8 tool stations Tailstock Chip conveyor 3-jaw chuck Kitagawa B210 Touchsetter T One Touch IGF Electronic handwheel on the control panel

Condition: excellent (used), Year of construction: 2014, CNC Lathe Okuma LU 3000 EX MY 2SC950 Control: OSP-P300 Year of manufacture: 2014 Internal machine no.: 27 Max. turning length: 950 mm Max. turning diameter: 340 mm Max. swing diameter over cross slide: 380 mm Max. swing diameter over bed: 580 mm Max. spindle speed: 4,200 rpm Tool holder interface: BMT 2 pcs. tool turrets A turret: 12 tool positions (all driven) Kjdpfxsyluvis Ampodk B turret: 8 tool positions Tailstock Chip conveyor Hydraulic power chuck B210/A8 Touch setter High-pressure coolant pump Enlarged coolant tank

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LU35-M-2ST-600 Control: OSP-P200L Year of manufacture: 2008 Internal machine no.: 25 Max. turning diameter: 550 mm Max. turning length: 600 mm Spindle bore: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A turret: 12 stations (all driven) B turret: 10 stations Toolholder: VDI 50 Accessories Schunk chuck NC Rota 500 Interlit chip conveyor Ksdpjyliquefx Ampjdk Including external coolant system Door automation Touch setter

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Kdedoyk Uimspfx Ampek Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Kdjdpfx Amjylkgqepjk Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared Kedpfxeyk Tbhj Ampsdk

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: BMT 65 Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Touch setter Programmable sub-spindle One Touch IGF Kdjdpsylhmusfx Ampsk 3-jaw power chuck Kitagawa Various driven and static tools

Condition: excellent (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Kdsdpfxey Abbhe Ampsk Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Approx. 40 toolholders BT 50

Condition: excellent (used), Year of construction: 2013, CNC Lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of manufacture: 2013 Internal machine no.: 18 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Kdjdpfx Aeylh Sdjmpjk Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: VDI 40 Equipment: Chip conveyor Touchsetter OneTouch IGF NC tailstock 3-jaw power chuck Forkardt 3QLC/K250

Condition: excellent (used), Year of construction: 2007, CNC Lathe Okuma LB 3000 EX -M C1000 Control: OSP-P200 Year of manufacture: 2007 Internal machine no.: 17 Turning length: 1,000 mm Turning diameter: 340 mm Kodpfxeyk Sgps Ampedk Swing diameter over bed: 580 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Bar capacity: 80 mm Direct mount: BMT 60 Equipment: - One Touch IGF - Chip conveyor - Touch setter - 3-jaw chuck (SMW 315 HB), capacity 85 mm - NC tailstock - Multi-language control - Coolant pump 8 bar

Condition: good (used), Year of construction: 2000, CNC Lathe Okuma LB 300-M Control: OSP-U100L Year of manufacture: 2000 Kodpsylv Utsfx Ampsdk Internal machine no.: 16 Turning length: 1,000 mm Turning diameter: 430 mm Spindle speed: 4,200 rpm Tool turret: 12 positions (driven) Mount: VDI 40 Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck Tailstock Parts catcher Short bar loader Samsys 3000 (optional)

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller model: OKUMA OSP P200M, total height: 3,150 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 630 mm, table length: 630 mm, rotational speed (max.): 6,000 rpm, overall weight: 22,500 kg, spindle speed (min.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Okuma MA series is a horizontal machining center with large travels for heavy-duty machining. The X/Y/Z travels are 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm. - OSP P200M - Year of manufacture: 2008 - Cutting time: 17,500 h - Renishaw Tool Eye - ATC 150 SK50 - 2-pallet system - Spindle speed: 6,000 RPM Kedpfsyg Rb Rex Ampedk - B-axis NCB 0.001 degree - X/Y/Z 1000/900/1000 mm - Mayfran Consept coolant system with chip conveyor and high-pressure pump 60 bar

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Coolant supply through the spindle 15 bar / 20 l/min Double screw chip conveyor for chip removal from the working area Kjdpfx Amoyq Sl Eepedk Synchronous tapping and thread milling Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Tool breakage monitoring and tool length measurement

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Kdodpeymfmnefx Ampok

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, workpiece length (max.): 300 mm, total height: 2,850 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 560 mm, table height: 800 mm, table length: 1,300 mm, overall weight: 8,000 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 15,000 rpm, tool diameter: 125 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MB56 VA OSP P200M, ATC for 32 tools SK40, chip conveyor, bag filter for internal cooling, 15,000 rpm. Feel free to request our all-inclusive package: loading, transport, installation, commissioning, and service. Kdodeyq R I Sepfx Ampek

Condition: good (used), Year of construction: 2004, operating hours: 11,287 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300 MC-1000 A-turret VDI40 with 12 positions, all driven (M-tools), B-turret VDI40 with 8 positions, Touch Setter for both A & B turrets, manual tailstock, chip conveyor, 8 bar coolant pump, extraction system, Samsys Multi-3000 bar feeder, chucks & tools available as options. Kjdpfx Amoylpzajpjdk

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Kodoyna Uispfx Ampodk A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 5,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS 2x Pallets 500 x 500 mm Travel distances X: 700 mm, Y: 800 mm, Z: 700 mm Table size: 500 mm x 500 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Table load capacity: 800 kg Spindle speed: 5,000 rpm Ksdpjyrgzkofx Ampsdk Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Maximum tool length: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Machine weight: 21,000 kg Dimensions (L x W x H): 5,500 x 3,160 x 3,300 mm Spindle hours: 18,500 EQUIPMENT Chip conveyor, coolant system, and pocket filter system for internal cooling

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno Kodpfx Amevta Rkspedk We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.