Used Okuma Lt 2000 for sale (185)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,082 h, functionality: fully functional, machine/vehicle number: 114599, turning length: 541 mm, turning diameter: 210 mm, travel distance X-axis: 192 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 700 mm, TECHNICAL DETAILS Machining specifications Turning length: 541 mm Turning diameter: 210 mm Axes and travels X-axis travel: 192 mm Y-axis travel: 50 mm Z-axis travel: 700 mm Spindle Spindle speed: 6,000 rpm Spindle motor power: 11 kW Feed X-axis feed rate: 30 m/min Z-axis feed rate: 40 m/min MACHINE DETAILS Electrical data Supply voltage: 400 V Phases: 3 P Frequency: 50 Hz Bodpfsw Ekrusx Abbslr Operating hours On time: 92,265 h Spindle hours: 23,082 h Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The machine will remain powered until the end of the auction, after which it will be dismantled.

Condition: ready for operation (used), Year of construction: 2017, turning length: 3,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 1,500 rpm, chuck outer diameter: 375 mm, Multitasking Machine Bledpfxewi Ezro Abbjr OKUMA MULTUS B750 C3000 YEAR2017 OSP-P300SA 15" chuck Max Machining dia:1050mm Length:3000mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Distance from spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Bsdpfjxyiq Nsx Abbolr Rapid traverse & feed rate Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Signal tower (3-stage) Foundation pads Clamping bolts

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Blsdpjxzi D Ssfx Abbjr Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Blsdpfxeh D Anas Abbor

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires! Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse, 380v available), we can ask Okuma to make a test report if required. Free loading on truck. Transport can also be arranged in the EU. As new condition, 930 hours on spindle, new 300.000 euro's, so a 125.000 saving on an as-new machine with Bljdpfxowzzrke Abbor

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg Blodjxrwpdjpfx Abbsr

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno Bsdpfx Abovta Rkebjlr We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 20,249 h, Control Unit Brand OKUMA Model OSP-P300 This Okuma Genos M560-V-e was manufactured in 2018. It features the advanced Okuma OSP-P300 control system and an SMW Autoblok pneumatic clamping system, ensuring constant clamping force. Ideal for automated serial production with its Robojob Mill-Assist automation system from 2022. Contact us for more information. Application Types Milling Bodsx Alkkspfx Abbjlr

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia Bljdpfx Ajxzgkiebbjr 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: used, Year of construction: 2000, x-travel 560 mm y-travel 560 mm z-travel 625 mm control OSP-U100M Fanuc spindle speeds 15000 U/min spindle drive 15/11 kW rapid travel x/y/z 30 mm/min Number of tool station 40 SK40 Pallet dimension 2 x 400x400 mm Bedpfx Aboxyaccjbolr table load 0,4 t table index 1 ° total power requirement 49 kVA weight of the machine ca. 11 t dimensions of the machine ca. 3,2 x 2 x 2,5 m Control OSP-U100M (Fanuc), 60 tool stations, it has trough spindle coolant, chip conveyor and two paletts.

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Turret: 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Bljdpfxoxg Itvo Abber Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Machine type: CNC lathe Manufacturer: Okuma Type: LU15-M Year of manufacture: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: from stock Long turning length - 1000 mm Towable tailstock - automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment enables this used machine to process long turning lengths of up to 1000 mm. Effective production is also possible thanks to the towable tailstock - automatic, the tool breakage / wear control, the partial hollow clamping device, the K pump and the dialog programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machine equipment Spindle motor VAC built 22/15 kW Long turning length – 1000 mm Towable tailstock – automatic G152 3-jaw chuck Forkardt, diameter 250 mm Steady preparation B-turret Partial hollow clamping device Dialog-IGF K-pump Tool breakage/wear control Chip conveyor Technical data Max. turning diameter: 340 mm Max. turning length: 1000 mm Travel X-axis: upper 260 mm (170+90); lower 140 mm (90+50) Travel Z-axis: upper 1,040 mm; lower 1.015 mm C-axis travel: 360° Spindle – number of travel steps: 2 – automatic Bore diameter: 62 mm A-turret (upper): 12 tools, all M-tool compatible, VDI 40 B-turret (lower): 8 tools, VDI 40 Rotating tool speed: 45~4500 min -1 Rapid feed: m/min X:15, Z:20, C:200 min -1 Tailstock quill diameter: 90 mm Tailstock quill stroke: approx. 100-120 mm Machine dimensions without accessories LxW: approx. 4800 x 2200 mm Machine height: approx. 2030 mm Weight: approx. 6900 kg Optional Transport organization and implementation Machine delivery and installation Bljdpfjx Afz Asx Abbjr Machine commissioning and production-ready handover

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Bsdpfx Absvta Sbsbelr Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 26,858 h, Control Unit Brand OKUMA Model OSP P20 This 4-axis Okuma Genos 560-V was manufactured in 2011. It features a retrofitted fully integrated 4th axis, an Allmatic vise, and a zero-point clamping plate on the rotary table. Documentation is available in both German and English. Consider the opportunity to buy this Okuma Genos 560-V vertical machining centre. Contact us for more information. Application Types Milling Bodpfxjx Alkdj Abbelr

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Bjdexwy S Eopfx Abbelr Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Year of construction: 2005, condition: excellent (used), Okuma MB-46 VAE 2005 - max. machining dimensions 760x460 mm - max. loading weight 700 kg - table dimensions 1000x460 mm - travels X= 762, Y= 460, Z= 460 mm - distance table-spindle 150-610 mm - max. speed 15.000 rpm - tool capacity: 32 - tool holder SK 40 Bedeh If Spjpfx Abbolr spindle makes noise ( videos available)

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 Bodpfx Abswa Nwfebolr *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 600 mm, turning diameter: 370 mm, Machine Type: CNC Turning Machine Manufacturer: Okuma Model: LU300-2ST Year of Manufacture: 2005 Control: OSP-E100L Availability: In stock Machine Equipment: - Parts conveyor belt and collection tray – workpiece chute with removal conveyor, including electrical kit - 2 turret disks with VDI40 (12 + 8 stations) - Power chuck cylinder for hollow spindle – pull tube bore 52 mm - Expansion kit “D” – Kit one-touch IGF-D Blsdpfxoxz Eqbj Abbor - Chuck open/close while spindle is running via M-code - Reinforced coolant pump 8 bar - Coolant can be switched on/off at turret A and B via M-function - Interface for bar feeder connection - Chip conveyor Technical Details: - Swing over bed: 530 mm - Swing over cross slide: 380 mm - Distance between centers: 600 mm - Max. turning diameter: 370 mm - Max. turning length: 600 mm - X-Axis travel: upper 260 mm / lower 140 mm - Z-Axis travel: upper 640 mm / lower 615 mm - Rapid traverse X-Axis: 20,000 mm/min - Rapid traverse Z-Axis: 25,000 mm/min - Spindle speed: 45 ~5,000 rpm - Spindle bore: 62 mm - 2 tool turrets: upper 12 stations, lower 8 stations - Spindle power: 22/15 kW - Machine dimensions (L x W): approx. 2950 x 2050 mm - Machine height: approx. 2010 mm - Weight: approx. 6,500 kg Options: - Organization and execution of transport - Machine installation and placement - Machine commissioning

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Bledpfxoxxn U Rj Abbsr Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 4 Bedpfx Aboxzvtgebslr Movement X-Axis Movement 560 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm This 4-axis Okuma MA-40HA horizontal machining centre was manufactured in 2001. It features a robust OSP 100U control system and a generous automatic tool changer with 60 magazine slots (ISO40). Ideal for complex machining tasks with its 560 mm travel in X, Y, and Z axes. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Swing over bed 700 mm Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Spindle bore 90 mm Blodpfx Aew Rkd Tjbbsr Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws

Condition: ready for operation (used), Year of construction: 2003, operating hours: 18,951 h, Control Unit Brand OKUMA Model OSP-U100L Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Coolant Pump: Reinforced coolant pump for pressures starting at 8 bar Bledpfx Absxy Th Sebjr Coolant Tank: 400 liters Workholding: Full clamping cylinder Chucking: Chuck blow-out with compressed air Other: Automatic shut-off at the end of a batch This Okuma LVT 300-M 2003 was manufactured in 2003. It features a travel range of 280mm, 12 tool stations, and a reinforced coolant pump supporting pressures from 8 bar. The machine includes a 400-liter coolant tank and a full clamping cylinder for effective workholding. Consider the opportunity to buy this Okuma 2003 vertical turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 1999, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1050 mm Z-Axis Movement 460 mm Y-Axis Movement 560 mm Tools Type of tool holder BT50 Bjdpfxexy Armo Abbolr This 3-axis Okuma MX-55VB was manufactured in 1999. It features BT50 tool holders and a tool measuring system. The machine has an X-axis travel of 1050 mm, Y-axis of 560 mm, and Z-axis of 460 mm. Complete documentation is available. If you are looking to get high-quality milling capabilities, consider the Okuma MX-55VB machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Model OSP-100L Main Drive Number of axis 5 Tools Number of index 40 Max tool length 1500 mm Additional Equipment Autodoor Bljdpfx Abjxwqwlsbjr This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning