Used Okuma Lb 15 2 Mit Osp 5020 L for sale (188)

Condition: used, Year of construction: 2022, operating hours: 450 h, CNC Turning and Milling Center, used Well-maintained, lightly used machine. On 15.09.2025, a geometry protocol was conducted by OKUMA Germany, confirming the machine’s 'generally very good condition.' Manufacturer: OKUMA Model: MULTUS B250II – C - 750 Year of manufacture: 2022 Control: OSP-P300SA incl. OSP Suite Operating hours (as of 15.09.2025): Spindle hours (total): 485 h Total power-on hours: 3,340 h Working area: Turning length: 750 mm Todpjwydv Ajfx Ahuof Z-axis travel: 800 mm X-axis travel: 500 mm Y-axis travel: 200 mm (+/- 100 mm) C-axis: 360,000° B-axis: 225° W-axis (tailstock): 810 mm Tool spindle: 360,000° Main spindle: Max. speed: 5,000 rpm Power: 22 kW Milling spindle: Max. speed: 12,000 rpm Power: 12 kW Taper: HSK-A63 Equipment: - 40-position tool changer - 3-jaw Kitagawa chuck - High-pressure coolant system (IKZ) - Electronic handwheel - Right-side chip conveyor - Helical interpolation for thread milling + eccentric milling - Control extension for conversational programming + helical interpolation thread cutting INCLUDES approx. 40 x HSK-A63 tool holders (without tools) This is a well-maintained, regularly serviced machine from a renowned company. The machine has already been professionally dismantled by a specialist company (22.09.2025) and is therefore offered as free loaded.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 103848, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, turning diameter: 330 mm, total length: 5,000 mm, total height: 2,400 mm, total width: 1,600 mm, overall weight: 6,500 kg, OKUMA LVT300-M Vertical CNC Lathe Serial Number: 103848 Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel distances: X-axis: 210 mm Y-axis: 330 mm C-axis (indexing): 360° Spindle speed: 40–4000 rpm Spindle bore: 62 mm Number of tool positions in turret: 12 Turret can accommodate driven tools Important note: The tool holders (including tools) and the chuck visible inside the machining area are not included in the sale or delivery. The chip conveyor is included in the sale and delivery, but not the pallets located on the conveyor. The three pallets shown at the end of the photos are included in the sale and delivery. Any oil mist extraction system visible in the photos is not included in the sale and delivery. Control: OKUMA OSP-U100L Length of chip conveyor: approx. 3500 mm Manufacturer: EWA-B Type: PS800 Year of manufacture: 2003 Machine number: 5746-01-358509.3 The technical documentation was not photographed but will be supplied with the machine. DIMENSIONS & WEIGHT: Tsdpfxjxw Uaws Ahuof Dimensions (L x W x H): 5000 x 1500 x 2400 mm Weight: approx. 6500 kg

Condition: used, turning diameter over bed 460 mm turning length 1250 mm Todpfx Ahsxwp Ebeuof centre height 230 mm centre distance 1250 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Tedpfx Ahexq Hr Esusf Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 760 mm Z-axis travel: 760 mm Spindle center to table surface: 50 to 810 mm Spindle end to table center: 135 to 895 mm Table size: 500 x 500 mm Max. load capacity: 500 kg Index positions: 360 Speed range: 50 to 15,000 rpm Number of speed ranges: stepless Taper: NT No. 40 Spindle diameter: 70 mm Feed Rapid traverse (X/Y/Z): 60,000 mm/min Manual feed (X/Y/Z): 1 to 60,000 mm/min Tool changer Tool holder: Standard MAS BT40 Magazine capacity: 48 stations Tjdpfx Aexvq Hdehusf Max. tool diameter (adjacent positions occupied): 70 mm Max. tool diameter (adjacent positions free): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Total power requirement: 43 kW Dimensions & Weight Space requirement: 2.7 x 4.73 x 2.87 m Machine weight: 11.5 t

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA - MacTurn 50 Offer Details Stock number: 1039-9061 Machine type: CNC Turning and Milling Center Manufacturer: OKUMA Model: MacTurn 50 Year of manufacture: 2000 Control system: OSP 7000 L Location: D-59302 Oelde, Germany Country of origin: Japan Delivery time: By arrangement Freight basis: Ex site Additional Information: CNC Turning and Milling Center OKUMA - MacTurn 50 WE OFFER YOU: Tedpjxtn Umsfx Ahujf - Workshop-inspected machines - Free loading onto truck - NO auction fee - Delivery available (at extra cost) - Offloading and commissioning (at extra cost) Technical Details Maximum turning diameter: 580 mm Turning length: 1,500 mm Control system: OSP 7000 L Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle: - Speed range, main spindle: 12 – 2,800 rpm - Spindle bearing diameter: 150 mm - Spindle bore: 110 mm - Spindle nose: JIS A2-11 - Main spindle drive power: 37 (30) kW - C-axis: 0.001° Travels: - X-axis: 598 mm - Y-axis: 230 mm (+110 / -120) - Z-axis: 1,660 mm Feeds: - Rapid traverse (X/Y): 12,000 mm/min - Rapid traverse (Z): 20,000 mm/min - Rapid traverse (C): 100 rpm - Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool Turret: - Type: H2 ATC - Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions - Driven stations: stepless - Speed range — driven tool positions: 40 – 3,000 rpm - Tool shank height: 25 mm - Boring bar diameter: 50 mm Tailstock: - Quill diameter: 120 mm - Quill stroke: 170 mm - Tailstock taper: MT 5 Tool Magazine: - Number of tool stations: 50 positions - Tool holder: MAS BT 50 - Max. tool diameter: 170 mm - Max. tool length: 350 mm - Max. tool weight: 20 kg - Magazine drive: 3.2 kW Total power requirement: 53 kVA Machine weight approx.: 18.5 t Space required approx.: 6.0 x 3.2 x 3.0 m Accessories - Chip conveyor - Central coolant system - High-pressure coolant: 20 bar - Tailstock - Signal lamp - C-axis: 0.001° - Y-axis - Hydraulic unit - Steady rest - Various tool holders: 44 positions - Three-jaw chuck: Schunk – ROTA NC 400-120 - Electronic handwheel

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. Tedpexr Diwefx Ahusf For CNC lathe OKUMA&HOWA 2SP

Condition: used, Year of construction: 2013, turning length: 1,020 mm, turning diameter: 340 mm, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,074 mm, total height: 2,487 mm, total length: 4,371 mm, total width: 2,536 mm, overall weight: 7,500 kg, CNC Control OSP P300L-R Turning diameter 340 mm Tsdpfx Ajxnmz Ushusf Turning Length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3.000 R/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Spindle speed driven tools 45 - 4500 R/min Number of driven tools 12 x Tool Taper VDI Bar feeder LNS Alpha SL 65S If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2013, CNC Lathe with y-axis Okuma - LT2000EX Tjdpfx Ahexpg Ecsusf Length:4200mm Width:2200mm Height:2700mm Weight:10000kg

Year of construction: 2006, condition: ready for operation (used), Control Unit Tedpfx Ahexq Ht Aouef Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Tjdpfx Ahetdg Evsusf Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.

Condition: good (used), functionality: fully functional, spindle speed (max.): 6,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,150 mm, table length: 2,800 mm, table width: 1,500 mm, Equipment: rotational speed infinitely variable, X-axis: 3.000 mm Y-axis: 2.000 mm Z-axis: 1.150 mm Table size: 2.800 x 1.500 mm Spindle nose: ISO 50 Tsdsxixrbepfx Ahusf Spindle speeds: 30 - 6.000 rpm ATC: 50 pockets CNC controller: OSP7000M Distance between columns: 2.050 mm Featured with: - Vertical milling head attachement - Touch probe - Double chip conveyor (recently renewed) - Cooling unit (recently renewed) - Machine manuals Country of origin: Japan Machine LxWxH: 9.000 x 3.500 x 3.500 mm +/- Machine weight: 27.500 kg

Condition: used, Year of construction: 2005, operating hours: 33,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Okuma, controller model: OSP E100M, rotational speed (min.): 10 rpm, rotational speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, number of spindles: 1, number of slots in tool magazine: 60, Okuma MB 500H horizontal machining center with 2-station pallet changer Year of manufacture: 2005 Control system: Okuma OSP E100M Tjdpfjwf E D Ejx Ahusf Technical specifications: Spindle speed: 10 - 15,000 rpm Drive power: 26 kW Tool holder: BT 40 Number of magazine positions: 60 Internal coolant supply: 70 bar Travel paths: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm 4th axis: Index 1° Number of pallets: 2 Pallet size: 500 x 500 mm Accessories: - Mayfran ConSep 2000 coolant system - Mayfran ConSep chip conveyor - Tool breakage monitoring in the magazine - Workpiece coolant shower

Condition: used, Year of construction: 2004, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-E100M, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, table height: 630 mm, spindle speed (min.): 12,000 rpm, power: 37 kW (50.31 HP), Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 Todpfx Aoxnkvishuef If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 11,500 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 10,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Tjdpfx Ahjwcd Evouof Machine Weight: 11,500kg

Year of construction: 2022, operating hours: 1,790 h, condition: ready for operation (used), Main Drive Spindle speed range 50 - 6000 Spindle motor power 11.5 kW Spindle bore 62 mm Number of axis 2 Additional Equipment Tedexuawcspfx Ahuof Automation: Samsys short bar loader Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools two BMT55 revolvers with 16 stations each This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm Tsdpfoxmaf Rjx Ahuef spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: good (used), Year of construction: 2006, operating hours: 21,437 h, functionality: fully functional, machine/vehicle number: 122574, Controller: OSP P200 L  Remarkably few spindle hours.    Max. turning diameter ø 720mm  2.000 mm distance between spindles  Spindle speed 3.500 rpm  Tjdpfx Aeurfz Ijhujf Spindle power 30 kW  Sub-spindle; spindle speed 3.800 rpm  Spindle power 22 kW  Spindle speed aangedr. Ger 5.000 rpm  Spindle power aangedr. Ger. 22 kW  Number ger. Under 12 Turret  Upper mill spindle HSK100 ATC 32 HSK 100   Y-axis 250 (+125 / 1-125) mm  Floor space: 6150 x 3073  

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm X-axis travel: 210 mm Y-axis travel: 330 mm C-axis travel (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Feeder belt Three pallets Todpfx Aoxnlh Tohujf Note: The tool holders and tools visible in the working area are not included in the scope of delivery or sale. Any oil mist extraction unit or pallets shown on the feeder belt in the photos are also not included in the sale or delivery.

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand OKUMA Model OSP-7000M Main Drive Tjdpfsxl H E Iox Ahuef Number of axis 4 Additional Equipment 4 pallets with tombstone This 4-axis Okuma MX-60HB horizontal machining center was manufactured in 1998. It features a BT 50, a 60-tool automatic tool changer, and 4 pallets with tombstone, enhancing productivity and versatility. Consider the opportunity to buy this Okuma MX-60HB horizontal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 5746-01-358509.3, turning diameter: 280 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-U100L, workpiece length (max.): 200 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Submitting a bid obligates you to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm C axis (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool positions in turret: 12 MACHINE DETAILS Control: OKUMA OSP-U100L Length of feeder conveyor: approx. 3,500 mm Tsdpfx Aoxnlfrohujf Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Turret can accommodate driven tools Feeder conveyor Three pallets Note: The toolholders and tools visible in the working area, as well as the chuck, are not included in the scope of sale and delivery. Any oil mist extractor and pallets on the feeder conveyor visible in the photos are also not included in the scope of sale and delivery.

Year of construction: 1997, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP7000L Main Drive Number of axis 4 Tedpsxl H Hlsfx Ahusf This 4-axis Okuma LU2-M was manufactured in 1997. It features a turning length of 1500 mm, ideal for horizontal turning machine applications. Consider the opportunity to buy this Okuma LU2-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 6110 mm Tjdpjxya A Nofx Ahuef Measurements depth 3380 mm Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Tools Number of station 150 Max weight 25 kg Max tool diameter 140 mm Max tool length 450 mm Type of tool holder HSK 100 This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 6900 kg Measurements height 2750 mm Tjdpfxoxx Dyvo Ahuef Measurements depth 3000 mm Dimensions Machine Length 2550 mm Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Z-Axis Movement 460 mm Y-Axis Movement 560 mm This 3-axis Okuma MB-56VB vertical machining center was manufactured in 2005. It features a working surface of 1300 × 560 mm, a maximum table load of 900 kg, and rapid feed rates of 40 m/min in X/Y and 32 m/min in Z. The spindle operates up to 12,000 rpm with a power of 20 kW. Tool magazine holds 32 tools. If you are looking to get high-quality milling capabilities consider the Okuma MB-56VB machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 10000 kg Movement X-Axis Movement 560 mm Z-Axis Movement 625 mm Y-Axis Movement 610 mm Tjdexx Dypspfx Ahuof This 4-axis Okuma MA 400 HA horizontal machining center was manufactured in 2005. It features a 400 × 400 mm working surface, 560 mm X-axis travel, 610 mm Y-axis travel, and 625 mm Z-axis travel. The machine supports a maximum table load of 400 kg and offers rapid feeds up to 60 m/min. Consider the opportunity to buy this Okuma MA 400 HA horizontal machining center. Contact us for more information about this machine. Application Types Milling