Used Oil for sale (6,541)

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility Rodpfx Aoy Iplfjdzecf

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Rsdpfxjxy Tmuo Adzjcf

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Rcodpfx Aswtg Hdjdzjf

Condition: ready for operation (used), Year of construction: 2018, An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible. Rsdpox El Abjfx Adzecf

Condition: ready for operation (used), Year of construction: 2022, An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible. Rcedpfx Asyg Nucsdzef

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Rcjdpfxezpbq Ho Adzjf Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231316, Technical Data – Used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2012 Extraction capacity approx. 500 m³/h Rodpfxozp Ihlj Adzecf Motor output approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W x D x H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional: HEPA H13) Filtration efficiency 99 % at ≥ 1–2 µm (F9), optional HEPA 99.95 % at ≥ 0.1 µm Noise level approx. 65 dB (model WS2 similar) Accessories & Features • Compact design for installation directly on or next to CNC machines • Stand for extraction • Three-stage filtration for efficient oil and coolant mist separation • Cartridge filter optionally upgradable with HEPA kit • Easy maintenance, low-noise operation, and durable filter elements Technical data and information subject to change and error. Prior sale reserved!

Condition: ready for operation (used), functionality: fully functional, fuel: diesel, For sale: 2 oil-powered high-pressure cleaners, including accessories, extraction system, oil tank, and remaining oil. The system is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. Location: Neusäß, near Augsburg. Condition and dimensions can be seen in the pictures. Rjdpfx Adozvc A Rszjcf

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. Rjdszva Tmopfx Adzscf It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Condition: good (used), Standard radiator, car radiator, oil cooler, heat exchanger -Oil cooler: Heat exchanger, without fan -Type: unfortunately no type designation -Pressure: max. 20 bar -Temperature: max. 120 °C Rodpfezk Etbox Adzscf -Dimensions: 270/130/H260 mm -Weight: 4.4 kg

Condition: new, machine/vehicle number: R910936910, Oil pump for Lavatec press. Rodpfxsy Ugdxj Adzecf

Condition: new, Oil meter, conoil. Rcodpfx Ajy Ud Nfsdzjf

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil Cooler - Flow-Through Oil Cooler D20V D30V 2 Flow-Through Oil Coolers - Cooling unit for machine cooling - individual sale possible. Two stand-alone flow-through oil coolers/coolers from Wöhr Kältetechnik for cooling/temperature control of the coolant circuit or the hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated in the housing with connection cable, LAE temperature controller MTR11 and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr Flow-Through Oil Cooler Type D 20 V, Year of manufacture 1998, Serial No. 98101582, Cooling capacity 2 kW, Refrigerant R 404 a, with integrated circulation pump, Operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), Dimensions approx. 80 x 75 x 110 cm, Total power consumption 1.7 kW Flow-Through Oil Cooler D 30 V Wöhr Flow-Through Oil Cooler Type D 30 V, Year of manufacture 1998, Serial No. 98101583, Cooling capacity 3.3 kW, Refrigerant R 404 a, with integrated circulation pump, Operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), Dimensions approx. 80 x 75 x 110 cm, Total power consumption 2 kW. The oil coolers and oil cooling system are in used condition and well maintained. Price negotiable. Our asking price per unit is €1,950.00 net ex works plus packaging costs. Rodpfxjg U H E Se Adzscf All technical specifications are subject to printing errors/mistakes. We only sell to countries within the European Community.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, INORON CLINER C 351 Rcedpfxozq T Aqo Adzjf Mobile washing station with oil separator and high-pressure cleaner Completely self-sufficient, no permit required, suitable for oil- and emulsion-containing tools or products. Like new condition; can be inspected on-site. For further information, please contact me.

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg Redpfx Adeziawrjzocf - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C Rjdpeyb Th Ajfx Adzocf

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, suction capacity: 2,800 m³/h, intake manifold diameter: 315 mm, filter area: 21 m², noise level: 68 dB, total height: 2,400 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 250 kg, Oil mist extractor for CNC machines, Nederman NOM28 HEPA filter separator The NOM filter is designed for use with individual numerically controlled machines producing a limited amount of oil mist. NOM filters are intended for applications that require higher air flow rates. In metalworking workshops where oil mist removal is a challenge, these filters can be connected to a central duct system supplying all machines. All units are equipped with a manometer indicating when filter cleaning (self-cleaning) is required. Fan power: 2.2 kW Airflow: 2,800 m³/h Filtration area: Main filter – 21 m² Rcjdpfjy R Aldjx Adzjf HEPA filter – 40 m² The device is in excellent technical condition – like new. Stock number: 1134

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Rjdpfxjxl Aaus Adzecf

Condition: excellent (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt WM GL20 brand, including gas piping (Dungs DN); with control cabinet. 1. Burner type: WM GL20/3-A Output: 250 - 2450 kW Design: ZM-R Year of manufacture: 2013 Rcodjy Urrzspfx Adzof Connection pressure: 15-500 mbar

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm Rcsdpfx Adsxz Avnozef -Weight: 56 kg

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Rodowbzxqspfx Adzocf -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispenser, oil station, fuel pump, tank data acquisition, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Flow rate: 1 to 10 l/min -Motor: Hanning 0.55 kW Rsdpfx Asw A Nddsdzscf -Pressure vessel: Volume 2.8 liters -Individual components: see photos -Quantity: 1x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/pc.

Condition: good (used), Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel Rjdpfob A Hzxsx Adzscf -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Condition: good (used), Emulsion splitting plant, oil-water separation system Rcjdpfx Aeb A Ib Hodzsf The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Condition: excellent (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Rsdpewbzzxefx Adzecf -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 -Inside/outside: Ø 110/170 mm -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.