Used Nikmann Maschine for sale (1,375)

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Njdpfjy Sv Syjx Abkjwh

Condition: used, Year of construction: 1993, Palletization including pallet loader and unloader, pallet magazine, banding machine, pallet labeling Capacity: 150 Pallet/h Nsdpfow Uc A Aox Abkewh Features: Pallet loader and unloader: Nagema PA; Year of construction: 1993; Capacity: 1700 crates/h; Dimensions: Length: 3 m, width: 2 m, height: 3 m Weight: 1.6 tons Banding machine:Athena Roboband 2VH; Year of construction: 2004Capacity: 150 pallets/h; Pallet dimensions: 1.2 m x 0.8 m; Logopac Logomatic 915/T; Year of construction: 2014; Capacity: 150 pallets/h

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Nodpfsvcqtzex Abkewh Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Condition: used, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet Nwodsvcqzrspfx Abkeh

Year of construction: 1983, condition: used, Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually Nsdpfx Ajvcqt Uebkjwh Additional title: with switch cabinet and CIP tank Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

Condition: used, 1520mm x 6.5mm x 25 TON PEKRUN MASCHINENFABRIK LOOPING PIT SLITTING LINE Manufacturer: Pekrun Maschinenfabrik Coil entry width: 360 - 1520mm Coil ID: 500 - 750mm Coil OD: 1990mm Material thickness: 1 - 6.5mm Maximum coil weight: 25ton Slitting shaft OD: 260mm Line speed: 110m/min Includes: Siemens S7 PLC system Kurschat laser thickness measurement system Tilgert Edge guides Scrap choppers with automated adjustment BKM crop shear Snubber rolls Seperation roll arm Pit Coil cars 2 - Arm Turnstyle Nodpfszafccex Abkewh Large amount of tools

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Nwedpfx Absy Stahekjh Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Condition: excellent (used), functionality: fully functional, Low-speed machine Cutting width – 150 mm Nwodpfx Abjyf I N Aekjh Motor power – 2.2 kW Rotor speed – 200 rpm Number of rotor blades – 9 pieces Number of stator blades – 2 pieces 6 units available, in perfect condition Capacity up to 25 kg/h Price: 1200 EUR per unit

Year of construction: 2016, condition: excellent (used), functionality: fully functional, High-performance stacking machine by TC Maschinenbau Consisting of: separator, aligning roller conveyor, layer forming unit, gripping unit, transport forks, lifting platform, slat magazines. The system is dismantled, overhauled, and partially reassembled for inspection in our workshop. Lengths: 2.5 to 5.0 m. Nodjxnyt Rspfx Abkewh

Condition: used, Technical details: Weight: ca. 80 kg Njdpfx Aswiu Smebkjwh dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE *

Condition: ready for operation (used), * Brand: RN Maschinenbau Nodjywmpmjpfx Abkjwh * Surface: length 5500 mm, width 2100 mm - 2 decks * Screen opening upperdeck: [] 18 mm. * Screen opening lowerdeck: [] 8 mm. * Driving: 30 kW E-motor * Incl.: springs.

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2300 mm - 3 decks * Driving: 30 kW E-motor Nwodpfx Aboywmpgoksh * Incl.: springs.

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Nwedpfx Abey Ibgzekjh Collection only

Condition: new, Year of construction: 2026, Z-MaT VT-600M, Vertical CNC Lathe (Series: 320-1000mm Turning Diameter) Siemens 828D Shop Turn Control, 15" Touchscreen C-axis with Hydraulic Brake, Driven Tools Nsdpowprtbofx Abkowh Fanuc Control Optional Max. Swing Diameter: 750 mm Max. Turning Diameter: 600 mm Max. Turning Height: 600 mm Spindle Motor: 15/18.5 kW Spindle Nose: A2-11 Max. Spindle Speed: 2,500 rpm 3-jaw Hydraulic Chuck without Through-hole, 610 mm Turret Type: BMT 65 Number of Tool Stations: 12, driven Drive Power: 4.5 kW Max. Rotational Speed: 4,000 rpm C-axis (Spindle) Indexing: 0.001" Rapid Traverse (X-axis): 16 m/min Rapid Traverse (Z-axis): 16 m/min Vertical Travel (Z-axis): 600 mm Horizontal Travel (X-axis): 450 mm Machine Dimensions: 2150 W x 3450 D x 3300 H mm Net Weight: approx. 10,200 kg Standard Accessories Full Enclosure Splash Guard Electronic Handwheel Coolant System Electrical Cabinet Heat Exchanger Coolant Wash Gun / Air Gun Automatic Lubrication System LED Work Light 3-Color Status Beacon Leveling Bolts and Blocks Tools and Toolbox Operating Manual Rear Chip Conveyor with Chip Cart RS232 Interface CE Certificate

Condition: like new (used), Year of construction: 2019, operating hours: 39 h, functionality: fully functional, machine/vehicle number: MZ-7321/19 / 11024, total height: 2,198 mm, total width: 1,648 mm, total length: 3,500 mm, overall weight: 3,500 kg, rotor diameter: 400 mm, rotor width: 850 mm, type of input current: AC, input voltage: 400 V, rotational speed (max.): 100 rpm, power: 30 kW (40.79 HP), As-new single-shaft shredder / size reduction system with minor signs of use. Used solely for testing purposes. The rotor shaft is equipped with a heavy-duty wear protection. Cassette system for rotor knives, 34 x 34 mm. Electric motor 30 kW, total installed power 37 kW, hydraulic power 3.75 kW, 400 V, 3-phase. Additional new rotor and stator knives included as spare parts. German operating manual. Three-part, adjustable stator knives. Hopper lockable, perforated screen 40 mm. The machine can be demonstrated under power. No warranty after purchase. Free loading from factory premises – Raesfeld. Detailed photos available on request. Subject to prior sale. Prices are net prices. Njdpfx Aey E S S Asbkowh

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum - Working length: just over 2 meters Nwodoy R Efaepfx Abkeh - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 34834_25_32, total length: 1,050 mm, total width: 850 mm, total height: 1,240 mm, overall weight: 310 kg, number of drawers: 12, height adjustment type: mechanical, product height (max.): 3 mm, Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg Nwsdpfx Aboy A Nwwsksh -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Nedpfey Sixtjx Abkewh Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Nwjdoy Sixmjpfx Abkjh Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 2,128 mm, total width: 1,294 mm, input voltage: 400 V, warranty duration: 6 months, input current: 32 A, laser power: 100 W, tank capacity: 32 l, volume flow: 20 m³/h, Polyamide laser sintering system including two interchangeable containers and unpacking station. The machine can be inspected and tested at any time at the BIBUS Austria demonstration center. Furthermore, the system features a quick-change mechanism between recoating blade and coater roller – the system is always up to date with the latest technology due to continuous upgrades. Nsdjqwkypjpfx Abkswh

Year of construction: 1992, condition: good (used), Mechanization for band saws with circular feed. Nwodpfx Abjfd Ibvsksh

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) Nedpfsw Ighijx Abkjwh The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG Nedpfx Aow Huh Nsbkewh General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 10000/2500/H1030 mm -Load capacity: 16 t -Tires: 250-15 industrial pneumatic tires -Number: 2 heavy-duty transport trolleys available -Price: per piece -Transport dimensions: 11600/2500/H1030 mm Nedpfx Aoyvyxrobkewh -Weight: 3080 kg

Year of construction: 1987, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 325, Bielomatik Jumbo-Roll Collator, collating system for sets with 5 webs, including cross cutter and numbering unit. Production Specifications: Format length: 406.4 – 635 mm (16 – 25 inches) Format length increment: 1/12 inch Paper weight: 90 – 160 g/m² Production capacity: 1-web at 12 inches 10,000 sheets/h Delivery type: sheet or folded Unwinding: 5x up to 1270 mm reels, with 70 mm core diameter, 4x up to 700 mm reels, with 70 mm core diameter Maximum web width: 500 mm Number of numbering stations: 1 (2-web possible) Letterpress printing: 1x letterpress numbering unit for 24 inch and 25 inch, Working width: 500 mm Inkjet: possible Cross-perforation station: 1 Tooling: Tool 1 x 16 inch: special divisions 4 1/3 inch, 4 3/12 inch, 12 1/6 inch Tool 1 x 17 inch: divisions 4 1/4 inch, 8 1/2 inch, 17 inch Tool 1 x 24 inch: divisions 6 x 4 inch (4 inch, 6 inch, 8 inch, 12 inch) Tool 1 x 24 inch: special division for cross perforation 18 mm (e.g. Snapout) Tool 1 x 25 inch: with gear division as per 24 inch Stapling: No Crimping: 4 crimping tools for 2-web production possible as 2 inch Swedish crimp Longitudinal gluing: continuous and intermittent possible on both sides for 16 inch, 17 inch and 24 inch. Not intermittent for 11 4/6 inch and 12 1/2 inch Cross gluing: 2 cross gluing units 24 inch, type ESS 17 inch glue cylinders, 2 pieces Edge trimming: max. 15 mm both sides, min. 5 mm one side Separation cut: Yes, for double output Fold lengths: 7 1/3 up to 17 inch possible Format gears for 16 inch, 17 inch, and 24 inch available, also 11 inch + 13 inch (cross perforation must be applied on the printing machine). 11 4/6 inch + 25 inch + 9 inch correction gears Accessories: Fold gears: 8 inch with 24 inch cylinder 8 1/3 inch with 24 inch cylinder and 25 inch gear Nwjdpfxoy Nyb Te Abksh 8 1/2 inch with 17 inch cylinder 9 inch with 9 inch gear on 17 inch cylinder 11 4/6 inch with 11 4/6 gear 12 inch with 24 inch cylinder 12 1/2 inch with 24 inch cylinder + 25 inch gear 16 inch with 16 inch cylinder 16 inch cross perforation, payment slip + fold on Bielo (special perforation height 17 mm) 17 inch with 17 inch cylinder