Used School Maschine for sale (1,829)

Condition: good (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm - Chippings 4-8mm Gijdpovw Urwsfx Ab Isp - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: used, We offer a board stacking machine. The stacker features a separating device and a powered roller table for pre-made packaging. Godpfx Aoyh U I Iob Isip More than half the width is in like-new condition, as only 120 cm wide boards have been stacked. Machine width: 4.30 m Machine length: 7.50 m The entire system corresponds to the foto

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface Giedpfx Ajx Akm Rob Isp • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring • Key switch to lock the EDIT function • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: used, Year of construction: 2009, functionality: fully functional, Kalmijer KGM biscuit machine with 2 biscuit rollers: Spekulatius and Kipfel. Comes with 10 baking trays. The machine has been overhauled. Stainless steel frame on castors. Equipped with heating for the rollers. Tray width: 25 cm; tray lengths: 1 m, 80 cm, and 60 cm. 16A connection. If you have any further questions, please contact us. Thank you in advance! Gedpfxsw T Rxce Ab Isip

Condition: new, Self-priming eccentric screw pump mounted on a running gear incl. 2/3 hose screw connection with locknut MG90/65 nozzle VA and 2/3 hose screw connection with locknut DN65/65 nozzle VA. Specifications: capacity 4 020 / 8 160 l/h power: stage 1 1,0 (1,36) kW (PS) Godpfx Abjb Nvb De Ieip stage 2 1,9 (2,6) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 270 mm width 500 mm height 810 mm weight 57 kg material 1.4301 / AISI 304 connections: in the front MG90 AG on the top DN65 AG suitable for mash

Condition: used, Year of construction: 2012, operating hours: 5,598 h, Bomag BW213PDH-4 roller from 2012 with only 5,598 operating hours! Gijdpfxoyt Uire Ab Iep * Manufacturer: Bomag * Model: BW213PDH-4 * Year of manufacture: 2012 * Displayed operating hours: approx. 5,998 * Operating weight: 13,100 kg * A/C - air conditioning * German machine * 119 kW * Deutz diesel engine * Additional photos and video available on request * Price: €44,900 net + 19% VAT For further questions please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information is provided without obligation or guarantee. Subject to errors and prior sale.

Condition: good (used), mileage: 193,386 km, power: 300 kW (407.89 HP), first registration: 05/2021, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, number of seats: 3, total length: 10,200 mm, total width: 2,550 mm, total height: 3,900 mm, loading space length: 7,680 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, full service history, power mirror, spoiler, tail-lift, trailer coupling, General information Number of doors: 2 Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 11.092 kg Carrying capacity: 8.408 kg Giedjymmntjpfx Ab Iop GVW: 19.500 kg Functional Tail lift: Dhollandia DHSV.20, slider lift, 2000 kg Make of bodywork: van Rijssel Carrosserie Plywood Box Interior Interior: grey Environment Emission class: Euro 6d Maintenance APK (MOT): tested until 05/2026 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2006, Wheel Loader Liebherr L 506 Stereo Stereo loader, features both articulated steering and rear axle steering, making it highly maneuverable Year of manufacture: 2006 Quick coupler + folding bucket 3rd hydraulic circuit 2 work lights at the front and 2 at the rear Very nice machine from industrial use, not from a construction site. It was operated in an industrial park as a "caretaker’s machine." Original paint, very clean, and ready for immediate use Loader price: €17,900 + VAT = €21,301 (VAT will be stated) Gedpfjytl Swex Ab Ieip Price with hydraulic quick coupler + folding bucket: €17,900 Available at extra charge: pallet fork Other attachments available upon request All prices are net ex stock plus 19% VAT We are happy to offer transportation to your location. Selling only to businesses or for export. Sale in as-is condition as seen. No warranty or guarantee. Indicated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee their accuracy. Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided does not represent warranted characteristics. The description and information given serve only for general vehicle identification and do not constitute a warranty in the legal sense. The information is not guaranteed to be complete. The information/descriptions and pictures are non-binding and do not constitute guaranteed features. Only the terms stated in the order confirmation and invoice are binding. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Specifications may need to be checked separately if applicable. We are also happy to accept your vehicle in part exchange. For further questions, we are at your disposal. For our international customers, we provide all customs and export documents for a smooth export process.

Condition: used, Year of construction: 2012, Air Cushion Machine Fromm Airpad Machine Manufacturer: Brüninghaus Model: AP 502 Year of manufacture: approx. 2012 Giodpfewulylex Ab Iop Film materials: PA/PE composite film or polyethylene film (100% recyclable) Compressed air connection: NW 10/4 – 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions (LxWxH): 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for different cushion sizes • Program change at the push of a button • Individual production possible from 4 cm to 16 cm length with defined fill levels • 10 programs available for storing multiple parameters

Condition: good (used), Year of construction: 2015, Internal item number: 26008 Universal Milling Machine Wagner FTA 400 Year of manufacture: 2015 Travel paths: X 400 / Y 200 / Z 380 mm Spindle mounting: SK40 Speed range: 50 - 2000 rpm Table size: 750 x 320 mm Workpiece weight: max. 285 kg Main drive: 2.2 / 3.0 kW Feed: 50 - 450 rpm (stepless) Quill diameter: 90 mm + Hydraulic machine vice + Safety enclosure (UVV-compliant) + Coolant pump + Operating manual Dimensions (LxWxH): 170 x 170 x 190 cm Weight: 1300 kg The machine comes from an educational institution and is in well-maintained condition. You are welcome to inspect the machine under power in over 500 m² of heated storage space. Gjdjymwpbspfx Ab Ioip

Condition: used, Year of construction: 2016, Equipment: all wheel drive, Liebherr L 538 Z 2plus1 Top condition, original paint Year of manufacture: 2016 VIN: VATZ1559KZB044515 Operating hours: 14,665 Machine handover on 19.01.2017 All services performed by Liebherr and documented. Last service at Liebherr on 20.06.2024 at 14,138 hours 4-cylinder inline engine, water-cooled with turbocharging Emission Stage IV, 155 HP Hydrostatic drive with 3-speed transmission, speed limited to 20 km/h, up to 40 km/h possible (currently 36 km/h) Air conditioning!!!! * Automatic central lubrication system (factory-installed by Liebherr) * Rear area monitoring with camera (function not tested!) * Ride control (boom suspension) * Steel lamp brackets instead of plastic * Fuel pre-filter Giodpjyqn Hrjfx Ab Iop * Climbing aid for easier cleaning of the front windscreen * Opening window in driver’s door * Premium touchscreen display * “Comfort” driver’s seat with pneumatic suspension (with seat heating) * Liebherr control lever (joystick) * Adjustable steering column * 4 working lights on the front cab roof * 2 working lights on the rear cab roof * Automatic bucket return * Reversible fan (for blowing out the radiator package) * Fluff filter in front of radiator package to prevent contamination * Pre-separator for engine intake air (TOP-AIR) * Beacon light preparation rear cab center * Audible reverse warning system (buzzer) * Radio preparation * Road approval possible!! Tyres 20.5 x 25 L3 – front axle 2 x 30% Tyres 20.5 x 25 L3 – rear axle 2 x 30% Net price with fixed 2.5 cubic meter bucket: €44,900 Available for extra charge: • Hydraulic quick coupler: €3,550 • High-volume bucket 4 cubic meters: €4,500 • Pallet fork 5 or 8 tons from €2,190 Available optionally with scale, e.g. used Pfreundt WK50 - WK60 scale from €3,900 All prices + 19% VAT or for export. Sale only to business customers or for export. Sold as seen, in as-is condition. No warranty or guarantee. The stated kilometer or operating hour readings are taken from the meter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer; the information provided is not to be considered guaranteed features. The description and information are for general vehicle identification only and do not represent a warranty in the sense of purchase law. The information does not claim to be complete. The details/descriptions and images are non-binding and not guaranteed features. Only the specifications in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The listing may contain typing or data transmission errors. The seller has not inspected the machine. Equipment must be checked separately.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW Bag/Packet Closing Machine NEW NEW Model: TK 18 Automatic and Manual function Clipband machine with date printing Gedpfx Aew S Slhob Ioip Stainless steel construction Operable by one person Suitable for packing baked goods such as bread, sliced bread, rolls, croissants, etc., as well as other food and non-food products Connection: 230V Dimensions: 740 x 700 x 1050 mm Brand new machine with warranty and spare parts service Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Clipband Maintenance contract Service package Delivery service Instruction & commissioning Visit our large showroom!

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Godsyg Dk Sjpfx Ab Ieip Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 Giodpoygv Upjfx Ab Ijp The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Gisdpfxoygv She Ab Iep Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm Gedoylkftepfx Ab Ieip injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2001, condition: ready for operation (used), Three grinding machines including several mobile extraction units are available. 1) Grinding machine Elektra Beckum TF 904/3.1WNB, year of manufacture: 2001, power: 3.1kW, speed: 8500rpm, grinding wheel diameter inner/outer: 30mm/200mm. 2) Mobile extraction unit Alko Mobil 200, year of manufacture: 2013, air volume flow: 2500m³/h, power: 2.2kW. An on-site inspection is possible. Gijdpsxph Ryofx Ab Ijp

Condition: excellent (used), Rema double grinding head / school machine wheel mass (in mm) 300/40/76 power (in KW): 1,8 Speed (rpm): 1450 Voltage: 380 Volt Lamp Shields Location: Ex stock 54634 Bitburg Gjdpfx Abohaf Nds Ieip - immediately available -

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Gisdpfxoi Eb Drj Ab Iep

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Godpfji Eb Dnsx Ab Ioip

Condition: ready for operation (used), INA YRT F-229093 Radial bearing for Supfina machine, the item has been overhauled, used, good condition, 100% working, scope of delivery as per photos Gisdeulqh Hspfx Ab Iop

Condition: new, Year of construction: 2026, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation Gijdpfotu H Tusx Ab Isp

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, spindle speed (max.): 36,000 rpm, spindle speed (min.): 1,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composites such as CFRP/GFRP, model building materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation _____ Reference number: 1218 Giedexdwndepfx Ab Ijp Availability: March 2026 Model: 5-axis CNC milling system RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 40/40/30 Workpiece dimensions X/Y/Z: 1000 x 800 x 400 mm Control: SIEMENS – Sinumerik One with HT 2 Tool changer: 12 tools Tables: 1 rotary table Tool breakage and length control: Renishaw TS 27 R Other features: Chip tray, anti-slip perforated tread plate Year of manufacture: 2026 Condition: new

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Gedpfjx S Etmex Ab Ioip Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. Giodpjng Exaefx Ab Isp The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site