Used Needle Bakery for sale (2,094)

Condition: used, Dimensions: L×W×H: 1020×750×670 mm Capacity: up to 1,500 dough pieces/h Power: 0.55 kW Bledey Ib Iljpfx Akasg Voltage: 400 V Weight: 155 kg

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Bodpsvn Tg Ijfx Akaolg Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Bsdpfou Thhrsx Akaolg Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Bljdpfx Akox Dnb Ujasg Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Bedsvf E Avepfx Akajlg Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, -Dimensions: 1210x780x1060mm -F9 40/60 -Serial number: 136 -Year: 2012 -For trays: 400x600 -Temperature: 250°C -9 shelves -Voltage: 400V -Power: 1.9kW -Weight: 173kg -Refurbished equipment: The equipment is prepared upon order; delivery and return times are agreed at that point (please request the price after refurbishment) -Oven operates via heated air circulated by powerful fans, ensuring rapid heat-up and very fast baking Bedpfx Aey H Iw Djkajlg -Temperature adjustable from 100 to 250°C -Heat-up time from 20°C to 200°C in 8 minutes -With or without steam for baking pastries, viennoiseries, baguettes, and bread as required -Stainless steel construction -Robust door and closure system -Washable and tool-free removable lock and latch -Control panel with electromechanical regulation

Condition: used, - Serial No.: 15591 - Model: Bakelux Blodpfsy H Ivtex Akajg - 10 levels - Tray spacing: 90 mm - Tray size: 600x400 mm - Baking surface: 2.40 m² - Year: 09/2000 - Power: 16.4 kW - Voltage: 400 V

Condition: used, -Reference: 7.2 / 84x214-4 -Oven dimensions (WxDxH): 1475x2780x2400 mm -Hearth size (WxD): 840x2140 mm -Baking surface: 7.2 m² -Serial No.: 1405116/BN/0010 -Temperature: 300°C -Electronic controls Bljdpfx Akey H Hyksaeg -Year: 2014 -4 decks -Voltage: 400V -Power: 43.5 kW -Weight: 3400 kg -High-efficiency combustion chambers -Combustion chamber with reinforced insulation -Large radiant surface across the three flue channels, ensuring rapid temperature recovery after loading -Flue channels fully lined with refractory material to improve temperature retention and heat resistance STEAM -Steam generator for each deck -Steam generators located on the right side inside each baking chamber -Electrovalve group for water supply mounted on the oven roof -STEAM EXHAUST -Individual steam exhaust for each baking chamber -Hood with steam extraction fan -Steam extractor with single speed -Manual steam exhaust valves ELECTRICAL INSTALLATION -Controls located on the left side -Electrical panel accessible from the front for easy maintenance -Lighting system with 1 lamp per deck positioned at the mouth, easily replaceable -Safety thermostat

Condition: used, - External dimensions (LxWxH): 1082x1052x1117mm - Capacity: 20 x GN1/1 - 20 shelves: 540x330mm - Combi oven for 1 trolley - 3 cooking modes: steam, convection, combination - 5 fan speeds - Voltage: 400V - Weight: 336kg - Refurbished equipment: unit is prepared upon order; collection and return times are agreed at that moment (please enquire for post-refurbishment pricing) - Automatic climate control Bledpfx Aey H Htwekaeg - Automatic cooking management - Production scheduling - Automatic cleaning and descaling management - 9 automatic cleaning programmes

Condition: used, - Dimensions: 1375x1080x1184 mm - Flour capacity: 75 kg - Dough capacity: 120 kg - 2 speeds - Model: 2230/s - Voltage: 400V - Power: 5.5 kW - Weight: 450 kg Blsdpfey H E Uyex Akaeg

Condition: used, - Mouth width: 620 mm - Deck length: 2400 mm - Number of decks: 4 - Model: JE426 24 Bledoy H E Nwspfx Akaeg - Number of lanes: 2 - Oven dimensions (LxWxH): 1670x3390x2260 mm - Oven dimensions (LxH) with suspended loader: 1930x2340 mm - Depth with column loader: 6000 mm - Depth with suspended loader: 6553 mm - Baking surface: 12 m2 - Installed power: 52 kW/h - With scissor lift loader - Refurbished equipment: The equipment is prepared to order; acceptance and return times are agreed upon at that moment (please request price after refurbishment)

Condition: used, - Masonry annular tube deck oven - Internal dimensions: - 4 decks, width: 3100 mm - Slab depth: 2210 mm - Mouth width: 620 mm - Baking surface: 27.404 m² Bjdpfx Asy H E Dnekaslg - Refurbished equipment: the equipment is prepared upon order; pick-up and return timings are agreed upon at that moment (please request price after refurbishment)

Condition: used, -Dimensions: 1840x2605x2490 mm -Stone size: 602x1840 mm -Model: Omega/2 -Baking surface: 9 m² Bledoy H Ez Hjpfx Akaeg -Number of decks: 4 -Year: 2011 -Serial No.: 16917191 -With integrated loader -8 baking mouths -Voltage: 400 V -Heating power: 78.4 kW -Power: 30.7 kW -Weight: 1910 kg -Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at the time of order (please request the price after refurbishment)

Condition: used, -Dimensions: 1420x2600x2200mm -Stone size: 801x1630mm -Model: Omega5.163 -5 decks -Serial number: 8118337 -Year: 2003 Bedpfx Akoy H Ebmjaelg -Baking surface: 6.6m² -Temperature: 300°C -Voltage: 400V -Power: 30kW -Weight: 1800kg -Refurbished equipment: The equipment is prepared upon order; lead times for collection and return are agreed upon at the time of ordering (please request the price after revision) -Front with brushed stainless steel hood -Solid refractory cement baking stones, 20mm thick -Stainless steel armoured electric heating elements -1 independent pressure relief valve per deck -1 independent steam generator per deck -Treated glazing to reduce heat loss -Steam unit and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Wiring looms made of high-temperature silicone cables

Condition: used, -Dimensions: 1870x2430x2300 mm Bodpfxsy H D Ncs Akaslg -Panel size: 602x1840 mm -Number of tiers: 5 -Year: 2005 -Serial number: 10619802 -10 outlets -Voltage: 400V -Power: 45.6 kW

Condition: used, -Dimensions: 1620x2225x2300 mm -Serial no.: 12026399 -Model: Omega 4 -Slab size: 801x1840 mm -Year: 2007 -Baking surface: 5.9 m² -Max. temperature: 300 °C -Integrated loader/lifter -Voltage: 400V -Power: 27 kW -Weight: 1590 kg -Overhauled equipment: equipment is prepared upon order; collection and return deadlines are agreed at this time (please request price after overhaul) -Front panel with brushed stainless steel hood -Heavy-duty refractory cement baking decks, 20 mm thick -Stainless steel sheathed electric heating elements -1 independent relief damper per deck -1 independent steam generator per deck -Thermal treated glass to reduce heat loss Bledoy H D A Aspfx Akaeg -Steam unit and column always on the same side -Equipped with steam extractor for the hood -Insulation by cross-laid rock wool panels -High-temperature silicone cable wiring harnesses

Condition: used, Electric oven with 8-level proofer Dimensions without stand (WxDxH): 780 x 1030 x 2100 mm Dimensions with stand (WxDxH): 780 x 1030 x 2400 mm Oven -Model: RS10A20-1 -10 levels -Tray size: 400x600 mm -Power: 18.6 kW -Voltage: 3x400V + N + PE / 50Hz -Serial number: 10NL C0143 Proofer RE16A-S -8 levels -Serial number: ETNL C0093 Bjdpfx Ajyhfubekajlg -Power: 1.2 kW -Voltage: 1x240V+PE / 50Hz -Refurbished equipment: Equipment is prepared upon order, pick-up and return times are agreed at that moment (price after refurbishment - please request a quote)

Condition: new, - Dimensions: 1370x190x2000 mm Blodpfx Aoy Hrf Ejkasg - Capacity: 100 trays - Weight: 109 kg - The steam sensors are designed to be connected to the exhaust of your oven and not to the outlet of the hood, then routed to a drain. - The drain must be connected at the bottom section. - The steam radiators do not operate with the hood suction system. - There is no fan connection.

Condition: good (used), Rondo jumbolina machine Bsdpfxoyw Tq Rj Akaelg Stainless, Jumbolina machine with twin cutting station, belt dimensions 5400mm x 640mm, variable speed, with various different cutting heads and blades, mobile, 3Ph

Condition: good (used), Year of construction: 2018, Polin K160D Planetary mixer Bledoyw Td Djpfx Akajg 2018, two 160L stainless mobile bowls, stainless beater attachment, variable speed, with safety guard, 3Ph

Condition: good (used), Year of construction: 2000, For Sale: Set (2x) Diosna SP160E spiral mixers with bottom discharge - Lifting tipper - Linear system with bowl - Diosna electrical cabinet with Siemens control - Fencing / frames - Locks and connections for flour pipelines - Documentation and electrical schematics - Electrical diagrams revised and updated with software in 2021 - Water dosing unit - Weighing hopper - Star hopper All in good condition. For questions, feel free to call. Machine inspection on-site is possible. Price: €125,000 EXW Loading and packaging are included in the price. Transport by arrangement. Bljdjy Egf Rjpfx Akaeg Subject to typing errors.

Condition: excellent (used), Year of construction: 2007, For Sale: - Set (2x) Diosna SP160E spiral mixers with bottom discharge - Diosna lift tipper - Linear system with bowl - Diosna control cabinet with Siemens control - Fencing / frames Bsdpfx Akoy Efpuoaolg - Valves and fittings for flour pipelines - Documentation and electrical diagrams A new bowl drive has recently been installed on Mixer 1. All equipment is in good condition. For inquiries, feel free to call. It is possible to inspect the machine on site. Price: €105,000 EXW Loading and packaging are included in the price. Transport by agreement. Subject to typing errors.

Condition: excellent (used), Year of construction: 2022, Rack oven for 400 x 800 mm tray size, 15 levels, with 3 carts Blsdpfx Ajy Dfmkskasg

Condition: used, maximum load weight: 13,150 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,490 mm, loading space volume: 44 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Wagon No. G0122151_1 – Manufacturer: Spier. * Simple corner fittings * Load certificate Code-XL * Roller shutter door (aluminum) * Suitable for forklift use * Telescopic support legs * Lashing options Bodpfx Akjy E H T Ijaelg 3 rows of lath lashing rails. Smooth furniture floor. Interior lining with needle felt. Delivery time: IMMEDIATE AVAILABILITY. Furniture equipment. Technically operational condition, no further repairs required. Undercarriage galvanized. UVV valid. Isolated paint flaking on components of the swap body. LASI CODE XL!!! Dimensions are approximate. Offer without obligation, subject to prior sale. Prices net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: good (used), Large throughput cooling spiral. 28 tiers, 880mm belt. Approx 550m belt. Was used as spiral freezer to freeze over 3 tonnes per hour of fried McD chicken burgers. Bledsx Hbhcepfx Akasg