Used Munters Dryer for sale (1,762)

Condition: good (used), Textile screen printing conveyor dryer Duedpovnrlpjfx Afnsn Acosgraf Eco 2 dryer TS 3080 13500W 400V 3 phases for auto or manual machines very clean We ship everywhere in Europe (shipping cost to be added)

Condition: good (used), Textile screen printing flash dryer Acosgraf Texflash SE 6000 6000W 400V 3 phases Dusdpfx Aevnrkfefnsn 6 x 1000W independent lamps for auto or manual machines automatic use with sensor very clean We ship everywhere in Europe (shipping cost to be added)

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Dujdpsgm Hwusfx Afnen Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 Dusdowwh Evspfx Afnon The Labotek FMD-M-M-15-15-V model is part of the FMD-M series by Labotek, a leading manufacturer of material drying, dosing, and conveying systems for the plastics industry. The FMD-M series comprises modular dryers designed for processing plastic granules. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for processing plastic granules and are characterized by their modular construction, allowing flexible adaptation to a wide range of production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Frequency: 50/60 Hz The Labotek AVR3G is an industrial vacuum conveyor with a 1-liter capacity, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical factors. Technical data for Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum grain size 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80°C Alarm function: Low material level Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data. Details are provided without obligation!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Dusdpfx Asun Rr Rjfnon Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances of < 40 % of the lower explosion limit (LEL). Highest temperature of the heating surface above 750 °C Equipment description: Technical data: Interior (usable space) 0.216 m3 Inner dimensions: width 600 mm height 600 mm depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Roller conveyor total 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Recirculation air volume flow increased 33 m3/h Total steam space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Over-temperature limit controller (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60Hz Rated current 12.0 A Rated power 6.0 kW Connected load 7.0 kW Weight: 275kg Type: LTU 60/60 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Dedpfx Afjhv Ru Sjnoun

Condition: excellent (used), functionality: fully functional, Tennant Type: T7+ ec-H2O™ Dsdev Tvq Hopfx Afneun Compact design with high maneuverability Product description: Clean hard floors comfortably, nimbly, and economically: with the battery-powered Tennant T7+ ride-on scrubber-dryer. Thanks to its compact design, the ride-on machine is ideal for gaps and narrow aisles. The optional ec-H2O NanoClean technology reduces water and detergent consumption. Compact design – ideal for aisles and elevators. Clear sightlines and simple controls. Optimal water suction – no cleaning agent residue. Optional ec-H2O-Clean technology for reduced cleaning agent consumption. Easy-to-clean, hygienic tanks. Low noise level of 67 dB(A). Automatic brake and parking brake. Available in various working widths. Includes battery, on-board charger, and brush. Technical details: Area of application: Indoors. Battery operation: Voltage: 24 V. Battery type: Lead-gel battery. Battery capacity: 240 Ah/per unit. Frequency: 50-60 Hz. Speed: 6.4 km/h. Direction of travel: Reverse, forward. Noise level in dB(A): 67 dB(A). Removable fresh/dirty water tank. Fresh water tank volume: 110 l. Dirty water tank volume: 110 l. Theoretical area coverage: 5120 m²/h. Practical area coverage: 5120 m²/h Working width 800 mm Brush diameter 400 mm Brush speed 260 rpm Brush contact pressure 36 - 73 kg Brush motor power 450 W Brush-assisted drive no Brush shut-off automatic yes Tires material rubber Wheels number 3 Non-marking wheels yes Wheel width 80 mm Wheel diameter 250 mm Turning circle 1840 mm Operator cockpit yes Squeegee material Linatex Squeegee width 1000 mm Suction motor power 450 W Body color Teal Frame color Teal Height 1270 mm Width 740 mm Depth 1270 mm Weight 443 kg Version with ec-H2O™ Rim material Polyamide Condition: used / Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), We offer here a Beko adsorption air dryer. BEKO activated carbon adsorber CLEARPOINT 2X times DRYPOINT dust filterS075RFWMX Kondensomat Bekomat 20 FM KA20K1ZAR BEKO activated carbon adsorber CLEARPOINT 2X Type: Beko adsorption dryer Dujdpfxjnyh Tye Afnen Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Total roller conveyor 55 kg Djdpfsun Rrqox Afnsun Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON MODEL: HHDP2700 SERIAL NUMBER: 4001011004 YEAR: 2011 Dusdeyh Uvxopfx Afnsn POWER (kW): 7 CAPACITY (m³/min): 45 PRESSURE (bar): 16

Condition: excellent (used), MANUF. AGT TYPE VD8/18C PY S/N 7D8-02741 YEAR n/a POWER (kW) 7 OUTPUT (m³/min) 30 Duedsyh Uq Nspfx Afnjn PRESSURE (bar) 16 HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER R404a

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. Dujdpfx Afeu D Arisnon The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 30.60 m³/min Dsdpfx Afox Sx U Donoun Year of manufacture: 2016

Year of construction: 2011, condition: excellent (used), Dry air dryer FarragTech CARD 10 S with container and 2 x suction conveyors ICEVA GS-4mD Stock no.: 503577 Machine type / Device type: Dry air dryer Manufacturer: FarragTech GmbH Type: CARD 10 S Dujdpjx Iduusfx Afnen Year of construction: 2011 Container volume: 10 ltr. Throughput: 2 h / 3.25 kg / 80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Accessories: 2x suction conveyors ICEVA GS-4mD

Year of construction: 2001, condition: refurbished (used), functionality: fully functional, with safety system for solvent-based substances according to DIN 1539, including exhaust air fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall in the interior Completely overhauled, 12 months warranty -Internal dimensions (WxDxH): 1000 x 1000 x 1500 mm -External dimensions (WxDxH): 1900 x 1430 x 2315 mm -Volume: 1500 liters -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs, each with 16 segments) -Eurotherm data recorder -Connected load: 29 kW Duodsvcb U Aepfx Afnon -6 mesh shelves included, as well as V2A support brackets -Minimum exhaust air volume flow: 360 m³/h -Maximum permissible solvent quantity: 36 g at nominal temperature of 300°C -with concentration measurement -Window seals renewed -Approximate net weight: 1200 kg -Including documentation, CE Declaration of Conformity Viewing possible by appointment in our warehouse. We supply new and used industrial furnaces. Contact us! Oven, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, annealing oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating air drying cabinet, recirculating air oven, solvent oven

Condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet -Manufacturer: Küppersbusch, Electrode dryer type SET-4 -Nominal temperature: up to 300°C -Usable space: WDH 140/140/460 mm Dodpfx Aox Ir Trefnsun -Voltage: 220 V -Power: 0.9 kW -Contents: see photos -Dimensions: 385/365/H695 mm -Total weight: 19.3 kg

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. Dsdpfx Afjxzup Toneun The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, input voltage: 400 V, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, input current: 22 A, Equipment: documentation/manual, Tesoma Compact-Eight-G-18-HH-SR – Tunnel Dryer (Gas Connection) Designed not only for screen printing but also ideal for digital print products (DTF, transfers). Dedpfx Afsvxr D Hsnoun The price includes the exhaust chimneys (each approx. 7.5 m) in double-walled stainless steel construction. The machine is assembled and connected. An on-site inspection is possible by appointment. The price refers only to the assembled system. The price does not include dismantling, (re)installation, or delivery costs. Upon request, contact can be made with a service provider who can arrange dismantling, transport, and installation if needed.

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Art.-Nr.: 2294 year: 2004 price: 7.400.00 Djdpfxoxltdws Afnsun contact: Mr. Rainer Eckerle

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point Duedou T Hrvopfx Afnjn -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - ----- Technical Data ----- Maximum pressure: 16 bar, Dusdpewziflofx Afnen Power supply: 230 Volt

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h Dusdpfjtty Rajx Afnsn

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Dusdpfx Afsuy Thmenon Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Condition: good (used), Year of construction: 2015, Moretto XD2 TS Mini Dryer – Technical Parameters (copy-friendly) Drying temperature (max): 180 °C / 356 °F Air flow: 3–10 Nm³/h (1.7–5.9 cfm) Hopper capacity: 15 dm³ (0.53 cft) Material capacity (bulk density 0.65 kg/dm³): 9.7 kg (21.4 lb) Total power: 1 kW (1.3 HP) Average energy consumption at 80 °C: 0.062–0.206 kWh Average energy consumption at 176 °F: 0.083–0.276 HP/h Power supply: 230 V / 1 phase / 50 Hz Dimensions & weight A: 409 mm B: 334 mm H: 591 mm H1: 556 mm d: Ø 9 mm D: Ø 50 mm F1: 180 mm d1 (mounting): 4 × M6 I: 100 mm Dedeyfhyuspfx Afnjun F: 120 mm Weight: 13 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Dusdpfx Aovu A Hdefnsn Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576