Used Adsorption Dryer for sale (2,009)

Condition: used, Compressed air adsorption dryer, activated carbon adsorber with post-filter BOGE type DAZ 5-2 For particularly dry air Manufacturer no. 38315449 Year of manufacture 2013 Volume flow max. 250 liters/min. = 15 m³/h Operating pressure max. 16 bar Connection thread G 1/4“ Mains connection 230 volts, 50 Hz - Pre- and post-filter Hedpfx Aevrkhksacofn Space requirement L x W x H 400 x 210 x 580 mm Weight 15 kg good condition

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 24 months, input voltage: 400 V, The dryers in the BD 360+ to 1260+ series are heat-regenerating adsorption dryers that remove moisture from the compressed air via an adsorption process. All dryers in this series are equipped with an innovative Smart Cycle control algorithm as standard. This results in significant energy savings at partial load without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with the vessel and pipework generously sized to minimize pressure drop in the dryer. The dryer can introduce dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured including the following optional extras: - Pressure dew point sensor Hedpst It N Sjfx Aacefn - Tank insulation - Fan filter New goods with 24 months warranty from date of delivery. Optionally also available with installation and commissioning, ex warehouse Wettenberg.

Condition: excellent (used), We offer here a Beko adsorption air dryer. BEKO activated carbon adsorber CLEARPOINT 2X times DRYPOINT dust filterS075RFWMX Kondensomat Bekomat 20 FM KA20K1ZAR BEKO activated carbon adsorber CLEARPOINT 2X Type: Beko adsorption dryer Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Hfsdpfxsnyh Tyo Aacen

Condition: used, Year of construction: 1987, Granule dryer, compressed air dryer, granulate drying plant, adsorption dryer -Manufacturer: Zander, adsorption dryer type K1300MS -Operating pressure: 7 bar, max. 16 bar Hjdpfjtpyqxsx Aacsfn -Container capacity: 200 litres each -Individual components: see photos -Transport dimensions: 1250/750/H1960 mm -Weight: 684 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, volume flow: 3,000 m³/h, pressure: 10 bar, power: 62 kW (84.30 HP), Good working Keaser heat regenerated adsorption dryer capacity 50.000 liters per min. connection DM 100 In good working condition Hjdpslddftofx Aacofn complete with filters before and after also various Keaser carbon absorbers available

Year of construction: 2023, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Hfsdpfod Sninex Aacen Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Condition: used, Year of construction: 2000, Type: DAn06 "Adsorption air dryers" Hfedpotp Ihqefx Aacen max. operating pressure: 16 bar max. temperature: 55°C Capacity: approx. 420 m³/h with 2 carbon steel tanks, solenoid and non-return valves, etc.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: APF271056, TECHNICAL DETAILS Dryer type Type: Heat-regenerating adsorption dryer Mode of operation: Moisture removal through adsorption process Control: Smart cycle control algorithm for energy saving at partial load Performance and capacity Pressure dew point: -40 °C (optionally -70 °C) Pressure drop: Minimized by generous design of tank and piping Assembly and installation Base frame: All components assembled and fully wired, ready for installation Hfjdpfx Aaju Rdfkscon EQUIPMENT Pressure dew point sensor Tank insulation Fan filter

Condition: used, Year of construction: 2003, volume flow: 283 m³/h, total width: 1,183 mm, total length: 1,200 mm, total height: 2,073 mm, pressure: 7 bar, overall weight: 605 kg, pressure dew point: -40 °C, pressure (max.): 16 bar, Equipment: type plate available, 1 heatless adsorption dryer Hfjdpfx Aov T Tw Rjacon Manufacturer: Kaeser Type: DC47E Flow rate: 283 m³/hour (4.72 m³/minute) Pressure dew point: -40°C Inlet temperature: 35°C Outlet temperature: 35°C Operating pressure: 7 bar Max. operating pressure: 16 bar Compressed air connection: DN25 (R1") Adsorbent: activated aluminum oxide Vessel capacity: 133 liters Filling weight: 60 kg Dimensions: Height: 2073 mm Width: 1183 mm Depth: 1200 mm Weight: 605 kg

Year of construction: 2023, condition: as good as new (ex-display), Parker Zander Adsorption Dryer K-MT6 cold regenerated, with multitronic-plus control with pressure dew point control with pre- and post-filter Exhibit: Hodpfxem Twwbe Aacefn Parker / Zander Adsorption System K-MT6 YOC 2023 Technical data: Compressed air supply: BSPT G 1/2" Flow: 0.93 m³/min at pressure dew point -40°C Other models and designs on request ! Max. pressure 16 bar Min. pressure 5 bar Compressed air inlet temperature: 25° to 50°C Ambient temperature 1.5°C to 50°C Installation site: frost-free indoor installation in a non-aggressive atmosphere. Mains voltage: 230 V , 50-60 Hz Protection Class: IP65 Dimension: Width: 493 mm Depth: 300 mm Height: 1203 mm Weight: 48 kg Visit our shop. We always have a large selection of compressors and dryers in stock.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. Hfodsr A El Eepfx Aacon "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Hfedpfx Aoxnl Sreacsn

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Hsdpfxsxaxr Ns Aacofn Complete with three filter set

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Hodsrp D Uxspfx Aacjfn Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: used, Year of construction: 2010, operating hours: 75,774 h, functionality: fully functional, Used Mark compressor with dryer. Used, in working condition. Hfodpowprvijfx Aacsn Available at the end of July 2025.

Condition: used, Year of construction: 2002, machine/vehicle number: 910060/0001, conveyor dryer plant Hfedpfx Asvt Rmvoacen Factory consists of: Conveyor dryer: • Feed conveyor (2019) • Three horizontal chain driven conveyor levels made of 5 sections (2002); • 5 heat exchangers (2002); • 5 fans (each is 80kW) (2002); • Cartridge filter for poisonous particles (2002), filters are cleaned; • Biomass separator (2019); • electronics; Fit to dry wood chips, corn biomass, hemp biomass. lucerne and similar. Manufactured in Germany

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb Hodpfx Aaowx E Nbscefn 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Hfedpjd Sm Dijfx Aacen Max temperature: 700 C °

Condition: excellent (used), Year of construction: 2022, Fully functional, checked. Power supply: 400V Capacity: 18 m3/min Hfjdjvq Nd Iopfx Aacjn

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Hfodpfx Aaeq Igyvecsn Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: Hsdpfxsq Nfuze Aacofn - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: good (used), L x W x H: 78 cm x 50 cm x 170 cm Hfsdpfx Asu Aqz Neacen

Condition: used, Year of construction: 2015, Used Mutoh ValueJet 1638X plus heater for sale. Fully working. Located in Vilnius, Lithuania. Hodpfewmp U Rox Aacjfn

Condition: good (used), SPIROFLUX Dryer Hfsdpou Aqvmefx Aacen W x L x H 80 x 55 x 160 cm

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Hfodpjxlggrofx Aacon