Used Munk Rectifier for sale (141)

Condition: used, Welding inverter, welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable:. with electrode clamp -Ground cable Itodpei Agxuefx Aacsn -Dimension: 560/290(H500 mm -Weight: 44kg

Condition: used, power converter / rectifier. Itedpfxod Ihaxo Aacon techn. details see photos.

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller Itedpfxsk Rtice Aacon LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 37 kg, hollow shaft diameter: 40 mm, 3 units available, price per unit! Speed [r/min]: 1415 / 19 Total gear ratio [i]: 72.98 / infinite Max torque Ma [Nm]: 600 Output torque [Nm]: 182 SEW service factor: 3.30 Mounting position IM: M6 Terminal box position [°]/cable entry: 270 (top) / standard Lubricant / quantity [l]: CLP 220 mineral oil / 2.40 Paint finish: Top coat RAL7031 - Blue grey Gearbox: FH57/G Hollow shaft: 40mm Design type: Hollow shaft with shrink disc Additional general features: G rubber buffer Documentation No. A: 26865343, 26883392 Parts list: 422511499 Ijdpfjwy Umrjx Aacstn Motor: DRN71M4/BE05/IS/TF/AK8W Motor power [kW]: 0.37 Motor frequency [Hz]: 50 Duty cycle S1-S10: S1 Motor voltage [V] / connection type: 230/400 delta/star Rated current [A]: 1.78 / 1.02 cos phi: 0.66 Connector circuit diagram: R81 / 680790306 Thermal class [°C]/protection type [IP]: 155(F) / 54 International efficiency class: IE3 Efficiency at 50/75/100% rated load [%]: 74.3 / 77.3 / 77.3 CE marking: Yes IS version: Complete connector Primary connector: IS = integrated connector Primary connector, electrical interface: 6 winding ends customer side; 3-wire supply with swap terminal bridge Primary connector, code: 01IB Brake: BE05 Brake voltage [V]/torque [Nm]: 230 AC / 5 Brake rectifier: BMK1.5 Brake circuit diagram: B121 / 690090206 Fan hood: Metal fan cover Motor protection: TF = PTC thermistor Encoder: AK8W / shaft-centered, friction-locked mounting via tapered shaft Electrical interface: asynchronous, serial RS485 Incremental value: 2048 Absolute value: Singleturn 16 bit + multiturn 16 bit Encoder connection: Integrated encoder connector on encoder cover with terminal lid, no thermal motor monitoring, A1GA Encoder-IS position/cable entry: 270 (top) / standard Encoder version: Supply voltage DC 7-30V Encoder circuit diagram no.: 681810208 Encoder code 1: 03AA20AN60AC Technical data sheet encoder: 63297795 Terminal box lid: IS terminal box cover made of aluminum with threaded holes 1xM25, 1xM12, 1xM20 Documentation No. A: 25957066, 26857987, 26864274 Nameplate: German 1st nameplate set / position: 0° Nameplate language (2nd set): German 2nd nameplate set / position: Supplied loose in plastic bag Operating manual language/quantity: German / 0 Parts list/language/quantity: German / 0 Customs tariff number: 85015100

Condition: new, Year of construction: 2023, functionality: fully functional, color: black, All kinds of new and used generators available. From 7.5 kVA to 2200 kVA and larger. Prices and availability/delivery time on request. Some machines are available directly from stock and in addition, non-stocked ones can be produced on order for you. Options: - single and double bearing - Different SAE/ construction sizes - Single bearing variants: different flanges - Single bearing variants: different couplings - 1 phase/ 3 phase - Different designs - 2/ 4 poles (6 poles on request) - Standard IP23 (higher on request) Prime power (kVA) specified at 50Hz 400V - Available models (other versions can be offered on request) 8.1 kVA, 11 kVA, 13.5 kVA, 16 kVA 12.5 kVA, 15 kVA, 17.5 kVA, 25 kVA 18.8 kVA, 22.5 kVA, 25 kVA, 27.5 kVA, 32 kVA, 37.5 kVA, 42.5 kVA 30 kVA, 35 kVA, 37.5 kVA, 40 kVA 45 kVA, 50 kVA, 60 kVA, 75 kVA, 80 kVA, 85 kVA, 90 kVA 100 kVA, 113 kVA, 125 kVA, 140 kVA, 150 kVA, 163 kVA, 180 kVA, 188 kVA, 200 kVA, 230 kVA, 250 kVA 250 kvA, 300 kVA, 313 kVA, 325 kvA, 350 kVA, 380 kvA, 400 kVA 500 kvA, 550 kVA, 563 kVA, 610 kVA, 625 kVA, 670 kVA 750 kVA, 800 kVA, 915 kVA, 1020 kVA, 1138 kVA, 1250 kVA 1280 kVA, 1420 kVA, 1560 kVA, 1680 kVA, 1905 kVA, 2100 kVA, 2205 kVA For generators >2205 kVA we also offer many options, please inquire without any obligation. Besides delivery of generators we offer many additional service options. Think of: - Engineering - Removal and installation of generators - Generator expansion with your desired specs such as a CosPhi controller, heating, PM etc. - Generator parts supply and wide range in stock such as generation fields, voltage regulators (generator AVR's), bearings, rectifiers / diode kits - On-site bearing exchange of your existing generator - Inspection, periodic maintenance, repair, overhaul and rewinding of generators. We can supply generators for all kinds of applications, both new construction and replacement of your existing generator. Besides 400V generators we also supply medium voltage generators and generator - transformer combinations with which all (common) voltages can be achieved. Think of 1kV, 3 kV, 5 kV, 6, 6.3 and 6.6 kV, 7kV, 10 kV, 11 and 11.5 kV, 12 kV, 13 kV, 15 and 15.6 kV, 20 kV, 23 kV, 25 kV, 26 kV solutions. Controllable or non-controllable. Itedpfxjq Uk Sbo Aacon Generators for rental generators, generators for emergency power applications, generators for marine purpose and specials with different voltages or special applications. Please contact us for the possibilities. We continuously have used generators in stock.

Condition: used, Year of construction: 2005, functionality: fully functional, Model 1500 Max. glass dimensions: 1500 x 3000 mm Z Isdpfx Aowii D Dsacjtn -axis (vertical) 185 mm. 3250x1620mm WORKTABLE It allows multiple placements. It is covered with synthetic material and the same operating head rectifies it for a perfect planarity. GMR Stock Place: GMR ES

Year of construction: 1975, condition: used, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier Iodpsq Davbsfx Aacetn -Charger: for forklifts, type GFWEA/W 24/70 -Input voltage: 220V 50Hz -Power: 25.2V/70A -Dimensions: 555/360/H690 mm -Weight: 55 kg

Condition: used, power converter / rectifier. techn. details see photos. Isdpfx Aod Ihaysacotn

Condition: ready for operation (used), Technical characteristics Forward spped 15m/min Digital control CN7000 ISO, IHM Mécanumeric on mobile panel with 15 inch touchscreen, data entry Ethernet link 500 W direct current servo motorization on the 3 axes Guides by rectified prismatic rails and ball bearing shoes Ball screw transmissions on X1, X2, Y and Z axes Itodpfxotqkawe Aacon Protection of the kinematics of the axes by telescopic bellows on the X, Y, Z axes Aluminum bar support plate Digital Z axis 195 mm Cutting head with sealed CO2 ROFIN SINAR laser including laser, unit of control, cooling, mirrors - Maximum power 360 W Aiming laser Equipment compliant with CE directives following recommendations 2006/42 / CE + 2014/30 / UE + 2006/95 / CE and including : Double safety circuit with standardized relay + shock detector buffers on gantry Course d'axe Y1510 mm Course d'axe X3050 mm Course d'axe Z195 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 27 Kw Overall dimensions

Condition: used, mileage: 98,327 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 11/2019, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,080 mm, emission class: euro6, color: red, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Atego 816 air conditioning box * Air conditioning * Cruise control * Box body * Bär Cargolift tail lift Load capacity 1000 kg * Wheelbase: 4220 mm * Engine 5.1 liter - 115 kW diesel (OM 934) * German Truck / Deutscher LKW * 1 Fahrzeughalter / 1 Car owner * Driving assistance system: Brake assist (Active Brake-Assist) * Driving assistance system: Lane departure warning system * Driving assistance system: Stability control assistant * Exhaust emission standard: 6 * Cab: S ClassicSpace * Adblue tank 35 l * Diesel tank 120 l * Immobilizer * Unladen weight: 5715 kg * Tires: 215/75 R 17.5 front 6/6 mm * Rear/back 215/75 R 17.5 7/7/7/7 mm * Sell box body * Loading space length: 6.1 m * Loading space height: 2.08 m * Loading space width: 2.5 m * Before the sale, the HU/SP "TÜV" will be renewed at our expense * All information without guarantee Itjdpfjm Tqhwsx Aacsn * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki. * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and don't have the opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Year of construction: 2021, condition: used, We are selling our chemical nickel work tank. Iodpfx Aaoqzgb Sjcotn The tank is made of acid-resistant stainless steel and electropolished on the inside. Sager and Mack pump and filter. Munk Protektostat Frequency converter for pump Heater with control and timer. From 10-93°C, approximately 1 hour 30 minutes. The internal dimensions are: L1200 x W600 x H950. The fill height is 880 mm, which corresponds to a volume of approximately 635 liters. Installation dimensions: L2100 x W900 Total connected load approximately 50A If required, we can also create a customized solution for you.

Condition: excellent (used), DANOBAT Model: RT 1200 Tangential Useful support surface: 1200 x 450 mm Useful grinding surface : (Chuck 100 mm) 1200 x 600 mm Useful grinding surface: ( Chuck 50 mm) 1200 x 550 mm Longitudinal X axis travel : 1300 mm Transvers Y axis travel: 500 mm Height of piece to rectify : 450 mm Grinding wheel rotation speed: 1500 rpm Grinding wheel power: 10 Cv Grinding wheel dimensions: Ø 400 x 50 mm Electromagnetic chuck: 1000 x 500 mm Adjustable speed on the table : 1-25 m/min Max. weight piece : 1000 kg Machine weight : 5500 kg Itjdpfx Ajvi Rtnsacen

Condition: used, Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg Itedeu Rv Siopfx Aacjn

Condition: new, Year of construction: 2020, functionality: fully functional, total width: 7 mm, total length: 21 mm, workpiece weight (max.): 100 kg, Equipment: cooling unit, documentation/manual, Complete zinc drum system, two-row, footprint 21 x 7 m, assembled and in working condition. All components are new and unused (only a test run with water). 11 zinc bath stations, approx. 0.8 m³ each / wet converter / 19 stations. Rinsing, pre- and post-treatment / loading and unloading Manufacturer: Fey Galvanotechnik, Solingen / Built in 2020 (some individual components built in 2019) The system essentially consists of: ATB S7 controller in 12 Rittal cabinets, Simatic HMI Touch Tank park: 1 stainless steel tank (double electrolytic bath), 15 PP tanks (triple, double, and single tanks) Drain ball valves, level probes, temperature sensors Immersion bath heater: 20 double electrolytic baths, 16 single electrolytic baths, 12 zinc baths, 2 zinc electrolyte preparations, 9 (3 each) thick film, blue, yellow; Rotkappe T-QS 630/1.25-230Ws, 1250W Oil separator (degreasing): Friess W20 stainless steel 31x drum units: filling volumes up to 100 kg per drum, Progalvano, PE 1000, slotted perforation 25x two-piece lids (blue), 6 of which have finer perforations (gray); 6x fan-type drums (green) 32x drum rotator motors mounted on the tank wall: SEW-Eurodrive K49 DR2S80MS8/4, 0.22kW Itedpev Ii Axsfx Aacjn 4x stainless steel trolleys: Fey TWR, lifting capacity 300kg, 1x stainless steel wet transfer unit (4x drum rotator motors: KF49 DR2S80MS8/4, 0.22kW; 5x travel (frequency-controlled): SEW-Eurodrive K37 DRN90L4/BE2/TF, 1.5kW; 4x lift (frequency-controlled): SEW-Eurodrive KF47 DRN90L4/BE2/TF, 1.5kW) 4x positioning lasers: TR electronic GmbH, 2200-00102, max. 125m; stainless steel trolley guide rail; Steel portal 12x Rectifiers: Munk D400 G15/1200 WR-POX, oil-cooled, 15V 1200A Used Rectifier (Double E-Del): Driesch, 12V 1200A 3x Floor-standing centrifuges: Fey 243-B383-1, 150kg, 300 rpm, drum diameter 700mm, 2x 6kW heating elements, pneumatic. Lid opening; 3x additional drums; Centrifuge crane system: Demag 250kg Centrifuge basket cleaning system including crane Stier 250kg, 500W; Boom: Power Plus POWX910, 300 kg, 115 cm 4x spray registers on the sink edge, on both sides, along the length; 4x pumps: Mefiag MSP0600-PP-CRS-VITON-PVDF, 750 W, max. flow rate 8 m³/h, max. height 10 m 3x stainless steel preparation and dosing tanks (zinc electrolyte, 2x E-Def), round, 1.75 m³ each, connected to the suction system; 3x pumps: Mefiag MSP0600-CRS-EPDM, 750 W, max. flow rate 8 m³/h, max. height 10 m 2x agitators 12x dosing pumps: Ecolab EcoAdd-ES-000510X, 11x ceramic inserts, 1x PTFE, 5.0 l/h Chamber filter press with piston diaphragm pump (zinc electrolyte cleaning): RuW Filtertechnik RW470/15 25x plate size 470 x 470 x 55 mm, external dimensions 230 x 100 x 110 cm, filter area 7 m², V-chamber 90 l, filtration pressure 15 bar, test pressure 700 bar, manual operation Recooling system RKP 300: Cooling tower: Lister KD 12-28-3 (water) 48 m³/h; Exhaustor: Walter 30kW, 3x Pump: Calpeda ESCC2900, 4kW, Q max. 78 m³/h, H max. 24 m 2x plate heat exchangers (Ti plates): Funke FP16-29-2-EH-0-10bar V: 4.9 l; 2x pump: Mefiag MSP 30- CRS-Tl, 3kW, Q max. 34 m³/h, H max. 25 m Exhaust: Scheidt BM3-800 NW 900, 32,000 m³/h; Scrubber: PP Scheidt WHZ-900, 32,000 m³/h, 99% filtration efficiency Loading device: Schwarz NH-2000 floor space, load capacity 2,000 kg 2x post-treatment tanks made of PE, round, 2.3 m³ each; storage rack for drum units, 12 spaces; walkways; approx. 150 m² black PE floor pan, 50 mm thick; PE pump sump, wastewater and inlet piping; 60x10 mm, 2 m long (2 boil-off stations were subsequ

Condition: used, mileage: 265,299 km, power: 302 kW (410.61 HP), first registration: 11/2020, overall weight: 18,000 kg, fuel type: gas, color: blue, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, SCANIA R410 N323 Natural gas retarder * EZ:11.11.2020 * km: approx. 265,289 * R410 * Type:N323 * Automatic * 12742 cubic capacity Ijdpfxoruzyke Aacjtn * Accident damage as shown in the pictures * Retarder * Deutscher LKW / German truck / Niemiecka ci??arówka * 1 Fahrzeughalter / 1 Car owner * 302 KW * 2xbeds * Rear silencer 600 mm * Chassis width 2550 mm * Frame thickness F 800 * Refrigerator * Air conditioning * LNG tank 352 liters & 406 liters * Rain sensor * Wheel formula 4x2 * Suspension leaf / air * ESP * FFU Orlaco camera system * Premium driver's seat * Auxiliary heating * EURO 6 * As you can see in the pictures, the vehicle is damaged. * We can help with loading on the trailer. We can help with loading on the trailer. Mo?emy pomóc w za?adunku. * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing und Finanzierung möglich / Leasing and financing possible * Eigene Werkstatt / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: excellent (used), Brand: ESTARTA Ijdpfx Aasvkc Uyscstn Model: 312 Type: Centerless grinding machine Grinding Wheel dimensions: 508 x304,8 x 160 mm Ø min/max to grinding: 1,5 / 75 mm Regulating wheel width: 160 mm Regulating wheel dimensions : 304,8 x 190,5 x 160 mm Maximum length to rectify in plunge : 160 mm Maximum length to rectify in plunge : 160 mm Grinding wheel head motor power : 11 kw Machine size : 2015 x 1280 x 1440 mm Weight : 3500 kgs Equipped with automatic plongée

Condition: good (used), Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz Iedpfx Aovmpgnsacotn -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Condition: used, mileage: 604,858 km, power: 320 kW (435.08 HP), first registration: 05/2015, overall weight: 18,000 kg, color: white, axle configuration: 2 axles, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, DAF XF 440 FT Tipping hydraulics Navi Climate * Tipping hydraulic system * Navigation system * German Truck / Deutscher LKW * 1 Fahrzeughalter / 1 Car Owner * Production year / Produktionsjahr: 2015 * Sun visor * 1 Bett / 1 bed * Auxiliary heating * Long-distance cab * Front leaf suspension / rear air suspension * Front steel suspension / rear air suspension * Automatic transmission * Sliding roof * Alcoa rims * Empty weight: 7353 kg * Tires: front / front 315/80 R 22.5 13/14 mm * rear 315/80 R 22.5 19/18/19/19 mm * HU/AU/SP ("TÜV") will be renewed before sale * All information without guarantee * Further information and criteria on ätzliche Service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents Itsdpfxen Up Hgj Aacen * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki. * The repainting in your desired color is possible in our house at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, fuel type: electric, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger Belatron type E 24/90 eco EU -Input voltage: 220V 50Hz -Power: 25.2V/90A -Dimensions: 550/410/H780 mm Itodpfx Aajiqpx Eecen -Weight: 94 kg

Condition: used, Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier Itsdpeq Dr Skofx Aacon -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36V/80A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Condition: used, Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier Iedpfx Aasu Huuuocetn -Manufacturer: Still, charger type E 24/50 SL -Input voltage: 220 V 50 Hz -Power: 24 V/50 A -Dimensions: 555/430/H750 mm -Weight: 50 kg

Condition: used, Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available Iodjb Uhuljpfx Aacjtn -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding power: max. 300 A Iedjd I Szqjpfx Aacotn -Welding cable with: electrode clamp -Ground cable -Number: 1x welding machines available -Price: per piece -Dimensions: 600/1230/H930 mm -Weight: 294 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources Iedpfx Aaod Ih Dascstn -Three-phase rectifiers for: MMA DC welding -Welding power: max. 350 A -Welding cable with: electrode clamp -Ground cable -Number: 2x welding machines available -Price: per piece -Dimensions: 500/620/H835 mm -Weight: 126 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier Itedpfxohhfz Ns Aacjn -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A. -Welding cable with electrode clamp -Ground cable -Dimensions: 860/680 / H650 mm -Weight: 164 kg