Used Muhr for sale (18)

Condition: good (used), Muhr + Bender KBL 16 Optima Muhr und Bender Optima KBL 16 Round steel 45 mm Square steel 42 mm Angle steel 90×9 mm Hjdpfsyy S E Sjx Afceff Throat depth of punch 500 mm

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included Hfsdpfx Ajd Ih Stofcef For further information please see brochure.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Hjdjyvvkwepfx Afcsff Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Hfodpfx Ajxf Utaofcsf Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: ready for operation (used), pressure 30.0 t Hfsdsxaaipspfx Afcef punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Year of construction: 1999, connected load frequency 220 V Hedpfevvx E Sox Afcsff rated current 263/152 weight of the machine ca. 1 t

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs Hedeu Id Ruepfx Afceff - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Hfjdpfx Aju Ickysfcof Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg Hodpfjxu Dxqox Afceff dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Hjdpfjncc Hujx Afceff Dimensions: 200x75x197 cm LxWxH

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness Hfsdpfx Aoium Stofcjf - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal Hjdpfx Afoqfgy Hjcsff - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Hfsdeium Euepfx Afcof Trade-in of used machines. Europe-wide delivery possible.

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls Hfjdpfefkmr Sjx Afcef 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg Hsdpfxswnhd He Afcjff - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6911122, cutting width (max.): 920 mm, Equipment: documentation/manual, safety light barrier, 1 piece Polar Mohr cutting machine Year of manufacture: 1999 Machine no.: 6911122 Machine is dismantled, packed, and in stock at our warehouse. Location: Austria Accessories: Light barriers Standard side tables left and right Hfodpfx Afjyzyizocsf Chrome air table Tools and documentation

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Hfedsx E Adpspfx Afcjf

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm Hfodpox Dtp Rsfx Afcef – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.