Mobile filter press

Netzsch o.ä.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 800 x 800 mm, 20 - 100 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 1500 liters, filter surface 20 - 100 m², dimensions 2500 - 9000 x 900 x 1300 mm, weight 3500 - 10000 kg, motor hydraulics, with or without plate transport, with or without filter cloths Hsdpfx Aofbbp Seatjnr

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Hnedewd Taljpfx Aator

Condition: excellent (used), Due to the dimensions, the tanks are cut into pieces and welded by us at the customer's site. Height 4,30m, Lenght 11m The cyllinder is made of AISI316 steel, the upper and lower heads are made of duplex steel, but AISI316 steel can be ordered. Welding price is discussed separately. Hedjma Dguspfx Aatenr 2 units available. We also offer 300m3 with dimensions 6.40 x 11.5 m for the price of 72900€ and 2 units 500 m3 with dimensions 8x 11.50 m for 108900 €.

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg Hsdsy Sblrjpfx Aatsnr

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Hnjdeqakhujpfx Aatsr Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Hnodoym Sdyspfx Aatsr Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Hnedsx Ev Tkepfx Aater Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Hjdpfsrp E Nnox Aatsnr

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,443 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 271 mm, travel distance Z-axis: 830 mm, spindle motor power: 17,000 W, total height: 1,950 mm, total width: 3,260 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, product length (max.): 2,440 mm, number of axes: 3, This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details. Hedpfx Aaeyu Sc Estsnr • V3 Version (No counter spindle, no y axis) • no bar loader • features a main spindle motor power of 25.5 kW (at 40% DC) or 17 kW (at 100% DC) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2006, functionality: unexamined, We are offering here a rotary table from the brand Parkson. Hnedpfxsxtu Efe Aater The model is PAR-251 R. The rotary table has a diameter of just under 250mm. Feel free to contact us for a non-binding offer.