Used Mobile Car Press for sale (24,806)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Godpfew Sgnksx Abyetw Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available - Gtedpfx Absiidm Nsyow

Condition: excellent (used), functionality: fully functional, working width: 1,200 mm, working length: 3,000 mm, LOMEC Windmill Press 3 GLUING SECTIONS! The press is in excellent condition! TECHNICAL PARAMETERS: - Working length: 3000 mm - Working width: 1200 mm - Pneumatic clamps - 3 gluing sections - 3 side clamps per section Machine dimensions: Gjdpfxjyr D Rve Abyetw - Length: 320 cm - Width: 125 cm - Height: 260 cm - Weight: 700 kg Financing options available via leasing or installment payments. Simply visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Do you have questions? Call or write!

Condition: like new (used), Year of construction: 2016, operating hours: 4 h, machine/vehicle number: 84149090, Complete container station with screw compressor, ready for operation in industrial conditions, equipped with a full air treatment system. Ready for immediate start-up. Only 4 hours of test operation. CONTAINER 10" Specifications: Compressor: Ervor Rafale 50 SP (2016) – screw type, oil-lubricated, fixed-speed Motor power: 37 kW (50 HP) Capacity (FAD): ~260 Nm³/h at 7–9 bar Drive: Belt drive with automatic tensioner Power supply: 400 V / 3 phase / 50 Hz Dryer: Adsorption (2-column, regenerated, timer or DP-controlled) Aftercooler: Air-cooled compressed air aftercooler with ventilation Filtration: Pre-filter, fine filter, and final filter class 1 μm / 0.01 μm Container: 10 or 20-foot, steel, ventilated, insulated, with service doors Control: Control panel + pressure switch, hour meter, phase protection Technical condition: Very good Gtodpfx Abjw D Ut Heyjw Cold-regenerated dryer Adsorption dryer ERVOR – 2-column air drying system Integrated in the container station. Suitable for continuous operation, with automatic bed regeneration. The set also includes an aftercooler and a complete set of filters (pre-filter, fine filter, final filter). System ready for industrial or military operation. Final humidity: ≤ -40°C PDP (pressure dew point) Air treatment and cooling system The station is equipped with a multi-stage compressed air treatment system, including: - 3-stage filtration (solid particles, oil, moisture), - Aftercooler with fan, - Insulated and serviceable pipelines, - Control manometers, ball valves, service bypasses, - System designed for heavy-duty use – industrial and mobile applications. Additional photos or video available upon request. We invite you to purchase.

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Gsdpfxew U Sw As Abystw Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm Gedpfx Abohwwnrsyetw 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction

Condition: excellent (used), overall weight: 1,500 kg, color: original, fuel type: diesel, volume flow: 192 m³/h, pressure (max.): 7 bar, Year of construction: 1998, operating hours: 2,946 h, We offer: KAESER M32 Technical data: YEAR 1998 CAPACITY (kW) 17.9 OUTPUT (m3/min) 3.2 CIS (bar) 7 HRS (DOC/GENERAL) 2946 INVERTER no NEW/USED: USED Gtjdsvu Spujpfx Abyjw S015199

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, total height: 2,600 mm, total length: 100,000 mm, total width: 1,000 mm, pressing force: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg Gtodsqai H Tspfx Abyow

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Gedpfx Aoyim Ayebystw Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 941, working height: 1,350 mm, working width: 600 mm, working length: 2,500 mm, TECHNICAL DETAILS Pressing length: max. 2,500 mm Pressing height: max. 1,350 mm Working depth: max. 600 mm MACHINE DETAILS Electrical data Rated voltage: 3/N/PE/400 V Rated current: 11 A Gtodpfx Aoxnyg Robyew Rated power: 4.7 kW Frequency: 50 Hz EQUIPMENT Vertical and horizontal press beams operated electromechanically Pressure build-up via frequency-controlled geared motors Vertical and horizontal press pressure adjustable separately Pressing time adjustable

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 680 kg, total height: 910 mm, total length: 1,200 mm, total width: 750 mm, table height: 910 mm, table width: 75 mm, overall weight: 195 kg, table load: 680 kg, table length: 1,200 mm, working height: 910 mm, The Rhino Cart® mobile clamping station is a turnkey system for clamping and clamping when welding and fabrication. Clamping and clamping at any point on the reversible, flat ground, nitrided (heat-treated) 1200 x 750 mm table top for accuracy in all your setups. Be ready for any job with the Rhino Cart® package, including: the Rhino Cart® welding table + fixture kit. Welding table (TDQ612075) + 66 pcs. + fixture kit (TDK6100) Fast clamping and clamping at any point on the surface. Accurately set stock for each new project. Table top reversible and is splash and rust resistant. Lockable wheels +set feet for mobile or stationary use. Rhino shelves, racks, and pegboard keep your fixture tools organized and within easy reach! Gjdpfx Abjtizfaeystw Price excluding VAT excluding shipping: €1950. Price including VAT excluding shipping: €2359,50

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke length: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Gsdpewcn H Rjfx Abyetw Stroke: 150 mm

Condition: new, Year of construction: 2022, Equipment: PACE control, ECO mode, HardHat hood made of PE, Xc2003 control system Minimum temperature: -10 °C Dimensions base frame: 4844 x 1807 x 1892 mm (L x W x H) Unload speed: 1500 rpm Rated speed at full load: 1960 rpm Ambient temperature: 45 °C Motor power: 104 kW Flow rate (FAD): 10.9-9.7 m³/min Operating pressure range: 5-14 bar Compressor control flexible pressure and flow control: PACE Engine make / model: John Deere / 4045HI551 Compressed air treatment consisting of: Compressed air aftercooler, water separator and PD filter. Emission level: Stage V Number of cylinders: 4 Gtedpfx Aeii U R Dsbysw

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler Gsdpfjud H Tnsx Abyotw - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO

Year of construction: 1993, condition: good (used), Offer 23100 Godpelnkrmsfx Abyjtw Technical data: - Pressure capacity steel 2 to 4 mm - pressure capacity INOX 2 to 3 mm - Horizontal throat 30 mm - Throat vertical 40 mm - Hydr. aggregate make NOLD type No40.9-4 year 93 - pressure capacity 250 bar - Drive 400 V / 4 kW - Space requirement W 600 x H 800 x D 900 mm - weight approx. 350 kg

Condition: good (used), Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Vertical beam setting N° 6 vertical cylinders N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Gtjdpfovv Ul Uex Abyow Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 5328, total width: 1,350 mm, total height: 1,500 mm, total length: 2,100 mm, briquette diameter: 70 mm, overall weight: 1,500 kg, type of input current: AC, input voltage: 380 V, oil tank capacity: 250 l, funnel diameter: 1,200 mm, power: 9.2 kW (12.51 HP), year of last overhaul: 2024, The press is in very good condition, was recently overhauled by a specialist, has a new control cabinet and has been stored in the warehouse since then. It can be inspected and tested. The hydraulic oil and the die can be cooled for continuous operation. It has a pressing capacity of 140 - 175 kg/h. Gtodpfxox H A A Is Abysw

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. Gjdsupyw Eopfx Abyetw QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) Gedovxgrrepfx Abystw • 2 potentiometers for continuously adjustable pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Condition: used, Year of construction: 1989, Working dimensions 3000 x 1250 x 650 mm Gtjdpfxexu Egve Abyjw Cylinder stroke 110 mm Machine dimensions 3240 x 2120 x 770 mm Weight approx. 900 kg

Condition: excellent (used), Year of construction: 1995, Pneumatic clamp for furniture. Usable dimensions: 3000x1200 mm. Motorized lifting of the upper bar. Tested and working. Gtsdsw S A Erspfx Abyew

Condition: excellent (used), Year of construction: 2017, Portable compressor ATLAS COPCO XAVS186 ST4, machine with aftercooler (air dryer) after full service!!! Gtjdpfonzh Rbjx Abyew Technical data: Capacity: 11.50 m³/min; Working pressure: 14 Bar; Year of manufacture: 2017; Engine: JOHN DEERE Operating hours: 1,643 h !!!!!; Compressor fully functional, ready for work, with warranty Machine in perfect condition!!! Below is a link to a video showing the machine in operation.

Year of construction: 2016, condition: excellent (used), ATLAS COPCO XATS186 11,4m3 10,3BAR COMPRESOR 2016! Mobile compressor ATLAS COPCO XATS186 ST4 machine with aftercooler (air dryer) after full service!!! Technical data: capacity 11,40 m3/min; working pressure 10.3 Bar; year of production 2016; JOHN DEERE engine mileage 1582 h !!!!!; compressor fully operational,ready to work,warranty net price: 128500 zł gross price: 158055 zł machine in perfect condition!!! Gtsdpfx Aopitifobyow Below is a link to the video , showing the work of the machine

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO COMPRESSOR XATS138 7.00m3 2017. Mobile compressor ATLAS COPCO XATS 138 machine after full service!!! Technical data: capacity 5,00-7,00 m3/min; working pressure 7-10.3 Bar; year of production 2017; KUBOTA engine mileage 500 h !!!!!; compressor fully operational Below is a link to the video , showing the work of the machine Compressor ATLAS COPCO XATS138 7.00m3 2017 tank capacity 0 l Gtsdpfx Absid Iy Hoyew

Condition: excellent (used), Year of construction: 2018, ATLAS COPCO COMPRESSOR XAS58 3.0m3/min 2018r. Gtsdpfx Abjtyk Svoysw Compressor DIESEL ATLAS COPCO XAS 58 machine after service Technical data: capacity 3.00 m3/min; working pressure 7 Bar; year of production 2018; KUBOTA engine mileage 681h!!! compressor fully operational net price: 39500 zł gross price: 48585 zł Below is a link to the video , showing the work of the machine