Used Minarctig 180 for sale (6,140)

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Fjdpjzg Twajfx Aa Eopk Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder Fpodpfjzhlcqsx Aa Eok -Manufacturer: Linde, double-acting hydraulic cylinders for forklifts -Item No.: 613596 -Stroke: 75 mm -Piston rod: Ø 22 mm -Hole: Ø20 mm / Hole spacing 287 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 345/68/H90 mm -Weight: 3.9 kg/pc.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Measuring table: precision measuring table Fpsdpfx Aaew Dcdms Eek -Clamping surface: 215 x 180 mm -Measuring stand: height up to 220 mm -Dimensions: 260 x 260 x H320 mm -Weight: 13.2 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 180 -Diameter: 180 mm -Valve drive: 220 V, convertible to 24 V Fedpomydmusfx Aa Eopk -Nominal pressure: max. 6 bar -Number: 2x gate valve available -Price per piece -Dimensions: 600/250/H140 mm -Weight: 5 kg/pc.

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: HL width 80 mm -Length: 180 mm -Dimensions: see photos Fpjdpfx Aowcbt Doa Eok -Number: 8x helmet rail available -Price: per piece/ minimum order 2 pieces -Dimensions: 180/80/H75 mm -Weight: 1.9 kg/piece

Year of construction: 2002, condition: used, fuel type: electric, Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece Fpjdpfx Aasi Dpzde Eok -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.

Condition: used, Three-phase motor, electric motor -Manufacturer: Loher, electric motor type eA 180 MA-4 Ex-protected Fodpfxst Hadge Aa Eepk -Power: 15 kW -Speed: 1460 rpm -Voltage: 380/500 V see photos nameplate -Shaft: Ø 48 x 110 mm -Protection class: IP44 -Number: 2x motor available -Price per piece -Dimensions: 650/430/H350mm -Weight: 156 kg/pc.

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake Fjdpfx Aaob A Nlqj Eepk -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Condition: good (used), Hand wash basin, wash basin, welded-in basin, welded-in swivel basin Fsdpeb Uhm Ujfx Aa Eopk -Stainless steel sink -Internal dimensions: 380 mm -Depth: 180 mm -Edge: 22 mm -Drain: Ø 54 mm -Quantity: 1x available -Dimensions: 425/H180 mm -Weight: 2.1 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket, trenching bucket Fpjdpfx Asdpkzyoa Ejk -Design: stable -Width: 275 mm -Height: 715 mm -Depth: 1020 mm -Intermediate mounting dimension: 185 mm -Hole diameter: Ø 50 mm -The attachment to the spoon: can be changed by us for an additional charge. -Weight: 120 kg

Condition: good (used), Year of construction: 2000, geared motor, electric motor -Engine comes from a Gansow scrubber-dryer -Connection: 24 volts -Speed: 180 rpm -Power: 0.4 kW -Protection class: IP 20 Fjdpfsdwa Diex Aa Eopk -Quantity: 2 available -Price: per piece -Dimensions: 310/132/H190 mm -Weight: 10 kg/piece

Condition: good (used), Machine vice, sturdy vice, drill press vice Fodedwa Dlspfx Aa Eopk -Vise: rotatable -Jaw width: 204 x 42 mm -Clamping depth: max. 180 mm -Dimensions: 480/340/H165 mm -Weight: 55 kg

Condition: used, Moving bezel, moving bezel, bezel, steady rest, lynette Fjdsh Tgdqspfx Aa Espk -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm -Weight: 32 kg

Condition: good (used), Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release Fpedpfx Ajw Upx Rja Ejk -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm -Weight: 3.5 kg

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 25 to 180 mm, see photos -Number: 3x tensioning brackets available -Price: per piece -Dimensions: 160/100/H270 mm -Weight: 3.5 kg/piece Fodpfx Ajw Upy Usa Eopk

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder double-acting stroke 180 mm -Piston rod: Ø 36 mm / M28 Fpjdpfov Nid Sjx Aa Eok -Mounting: bolt circle Ø 118 x 8 mm -Dimensions: 380/140/H140 mm -Weight: 10.6 kg

Year of construction: 2003, condition: used, fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Manufacturer:Emmevi, fan wheel cross-flow fan -Article number: COD. 119636 -Voltage: 230V -Fan wheel: both sides Ø 60 x 180 mm -Number: 14x fan wheel available -Price: per piece -Dimensions: 470/100/H95 mm Fpjdpfx Aaounn H So Ejk -Weight: 2 kg/piece

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm -Surface: milled Fpodpfx Aeb E N Ttja Eok -Weight: 3.5 kg

Condition: good (used), TIG welding machine Fpedpeb A H I Sjfx Aa Esk -Nimak electrode unit -Dalex converter -Hose package -ground cable

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor -Axis drive bending machine Hämmerle AP100 -max. speed: 4000 rpm -Shaft: Ø 15 mm -Design: B14 -Quantity: 1 piece -Dimensions: 280/180/180 mm Fpsdpog Avp Aefx Aa Eek -Weight: 7.2 kg

Condition: used, Stick electrodes 3.2 x 450 Fpeded I Al Espfx Aa Eok -Type: KESTRA Fe Ti 180 -Price: per package -Number: 3 packages -Weight: 5.9 kg

Condition: good (used), Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Shears: 200 mm Fodpjd Rz Dyefx Aa Ejpk -Dimensions: 350/100/H710 mm -Weight: 17.6 kg

Year of construction: 2017, condition: used, Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor Fpjdpsh Ay R Eefx Aa Ejk -Manufacturer: olocco, rotary valve type VPS 180 -Inlet opening: Ø 120 mm -Outlet: 150 x 115mm -Shaft: Ø 25 x 60 mm -Dimensions: 320/250/H245 mm -Weight: 27 kg

Condition: excellent (used), Marine diesel piston, diesel engine piston Fedpfx Aob A H Agea Ejpk -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

Condition: good (used), Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 180 x 4 mm -Dimensions: 800/400/H900 mm -Weight: 60 kg Fodpfx Aaob A N T So Eepk