Used Minarctig 180 for sale (6,026)

Condition: good (used), Year of construction: 2014, mast type: telescopic, fuel type: diesel, Weights Empty weight: 25.139 kg Functional Lifting capacity: 340 kg Working height: 5.668 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 2522 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 16,28x4,98x3,09 Additional information Please contact Christian Theißen for more information Gsdpsx Uy T Hjfx Afnstu Manufacturer: Genie Model: SX180 Year of build: 2014 Condition: Used Data: Max. working height: 56,68 m Max. platform height: 54,68 m Max. reach: 25,22 m Drive type: Diesel Total dimensions LxWxH: 16,28 x 4,98 x 3,09 m Length of transport position: 13,20 m Height transport position: 3,09 m Track widening: 4,98 m Platform dimensions LxW: 2,44 x 0,92 m Max. basket load: 340 kg Swivel range: 360° Overhang: 1,19 m Movable up to working height: 54,68 m Ground clearance: 0,33 m Empty weight: 25.139 kg Special features: Rotating work basket 160°, basket arm, all-wheel drive.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,100 h, load capacity: 200 kg, empty load weight: 8,100 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated Boom Lift Transmission: Hydrostatic Technical Condition: Good Front Tire Type: Solid Rubber Front Tire Condition: 80 - 100% Rear Tire Type: Solid Rubber Gtedpfx Afsx Nz D Ajnsu Rear Tire Condition: 80 - 100% Description: The articulated platform Manitou 160 ATJ+180 ATJ is ideal for outdoor work on uneven or inclined surfaces. With a lifting capacity of 230 kg, an articulation height of 7.38 m, and a working height of 16 - 18 m, it ensures a wide working range. Featuring a diesel engine and four-wheel drive combined with three control modes, the 160 ATJ+180 ATJ stands out for its high performance and autonomy. The ergonomic control panel design provides a clear and user-friendly workspace. Thanks to hydraulic speed control, noise levels and fuel consumption are reduced.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 125 h, load capacity: 230 kg, empty load weight: 7,600 kg, construction height: 2,530 mm, fuel type: diesel, total length: 7,770 mm, drive type: Diesel, arm reach: 10,600 mm, construction width: 2,300 mm, working height: 17,650 mm, Articulated boom lift Transmission: Hydrostatic Condition: As new Technical condition: Very good Front tyres type: Solid rubber Front tyres size: 18 Front tyres condition: 80 - 100% Godpfx Aoupauqofnjtu Rear tyres type: Solid rubber Rear tyres size: 18 Rear tyres condition: 80 - 100% Description: The 180 ATJ articulated boom lift offers a lifting capacity of 230 kg with a working height of 18.19 m. It meets all requirements for outdoor work on uneven, sloped, and obstructed surfaces. Its off-road capability makes it the ideal working partner on construction sites with rough terrain. Thanks to the new progressive hydraulic speed control, both noise levels and fuel consumption are reduced. Like other engine-powered work platforms, its 4-wheel drive and 3 steering modes make maneuvering and positioning the machine easy on congested or tight sites. The design of the control panel ensures a clear operating environment for quick handling and immediate productivity. 230 V generator and sockets in the platform basket, SMS Safe Man System

Condition: new, The Basic 180 V is a robust Conventional Horizontal Lathe that stands out in the Metal Lathes group, known for its exceptional stability and performance. Designed with a heavy cast-iron bed and a significant bed width of 206 mm (8 in), this lathe offers a solid foundation for high-quality machining. Its advanced features, including an inverter that achieves up to 3,000 revolutions per minute, and a constant cutting speed function, ensure smooth operations that match the quality of a CNC lathe, even during heavier machining tasks. With a large turning diameter of 356 mm and a center width of 1,000 mm, it can accommodate various applications, making it an ideal choice for industrial requirements. The Basic 180 V includes comprehensive standard equipment such as a 3-axis position indicator and a coolant system. You can trust KNUTH for precision-engineered tools; request a quote today to explore how the Basic 180 V can enhance your machining capabilities in the Conventional Horizontal Lathes category. Gtedsuzlbuepfx Afnsu

Condition: good (used), Upper support Slide width 145 mm Gtodpfodq Nvijx Afnsu Height 72 mm Bolt circle diameter 180 mm Centring spigot diameter 70 mm Surface 240 x 220 mm Weight 23 kg Transport dimensions: L. 490 mm B. 220 mm H. 270 mm

Condition: used, Coordinate grid Gedpjbipxwofx Afnotu Diameter 180 mm Clamping surface 100 x 110 mm short taper 63 mm Camlock system mounting flange interchangeable

Year of construction: 2011, condition: ready for operation (used), Two Arburg injection molding machines including temperature control units, conveyor belts, cranes and one robot are available. 1) Arburg Allrounder 170S 180-30, year of manufacture: 2011, tie bar spacing: 220mm, crane load: 350kg, total connected load: 50kW, automatic hours: 38396h, pump hours: 42595h, weight: approx. 1750kg. Including Tooltemp TT 157E, Tooltemp 157Es, crane and conveyor belt FA-LU600/LA1400xB300. 2) Arburg Allrounder 170S 180-30, year of manufacture: 2011, tie bar spacing: 220mm, crane load: 350kg, total connected load: 50kW, automatic hours: 44090h, pump hours: 49127h, weight: approx. 1750kg. Including Tooltemp TT 157E, Tooltemp 157Es, crane and conveyor belt FA-LU600/LA1400xB300. Documentation available. On-site inspection is possible. Individual sale possible. Gedpfxeyiflyj Afnstu

Condition: ready for operation (used), Year of construction: 2007, operating hours: 46,000 h, Axes: 4, load capacity: 180kg, working radius: 3200mm, positioning accuracy: +/-0.25mm, max. total load: 430kg, cycle output: 30/min. Control: KR C2: max. control axes: 6, weight: approx. 35kg. Robot weight: approx. 1200kg, dimensions X/Y/Z: approx. 1200mm/1800mm/1700mm, robot set-up dimensions X/Y: approx. 1000mm/1000mm, operating hours: approx. 46000h. Documentation available. An on-site inspection is possible. Gsdpfxjt R Trfo Afnotu

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Gjdpex E Ac Eefx Afnstu

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Gtsdpfx Afswftcvonou

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Gsdpfjttv Trsx Afnotu

Year of construction: 2016, condition: ready for operation (used), A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible. Gtedpfx Aoxx Udljfnou

Condition: ready for operation (used), Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible. Gtedjxz Ew Uopfx Afnju

Year of construction: 2009, condition: ready for operation (used), A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible. Gtedoxt Rm Sjpfx Afneu

Condition: ready for operation (used), Year of construction: 2009, Two Polymaster sample display machines for the film industry are available. Working width: 1900mm/2100mm, roll weight: 100kg, machine dimensions X/Y/Z: approx. 2550mm/1050mm/2000mm. Documentation available. An on site inspection is possible. Gtjdpfx Afoyh Nvtsnju

Year of construction: 2014, condition: ready for operation (used), A two-component injection moulding machine Engel with piggyback configuration, including Engel Viper 40 robot and safety enclosure, is available. Clamping force: 1800kN, nozzle diameter: 35mm, min. mould installation height: 270mm, max. platen distance: 1020mm, tie bar spacing: 980mm, centering: 180mm. Screw diameter 1/2: 22mm/15mm, injection pressure 1/2: 2392bar/2203bar, injection weight 1/2: 66g/19.5g. Robot year of manufacture: 2014, robot travel X/Y/Z: 700mm/1300mm/2360mm. Machine dimensions X/Y: approx. 6700mm/2100mm, control: CC400, operating hours: approx. 38567h. The 22mm screw needs to be replaced. Without conveyor belt. Documentation available. An on-site inspection is possible. Gedjw Hth Iopfx Afnjtu

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Gjdpsxcx Amefx Afnstu

Condition: used, maximum load weight: 23,730 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 04/2022, Sliding tarp left/right, sliding roof, EcoLift lifting roof approx. 380 mm raisable, AAC Basic, toolbox, SAF landing gears, fire extinguisher holder, colour grey Gjdpoyf Sy Sefx Afnstu

Condition: new, Year of construction: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series Gtedpfed Nm Sijx Afnju + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: used, Year of construction: 2015, Manufacturer: Embatherm Model : DTE 180 Year : 2015 Type: Pot filling machine / aluminum thermo sealing machine Application: Liquid/semi-liquid product (cream)   Distribution: conveyor + transport wheel Filling: piston block with hopper Maximum capacity: 250 ml Pot detection to confirm filling Product rotation during filling: yes Lid presence sensor Detection/Ejection of non-compliant parts Lid loader Pick and place of the lid using suction + heat sealing by conduction Omron PLC + HMI   Multiple formats available Height adjustment for pot holder / filling nozzle / heat sealing: manual Machine length: 355 cm   Complete technical file Video in operation available   Gtjdpjx R Dzyefx Afnsu      

Condition: new, Year of construction: 2024, • CNC Lathe Hwacheon SMC 180 with Sub-Spindle Brand New!!!! • Control: Fanuc 0i-TF with Manual Guide I • Rapid traverse X / Z / B: • 36 / 36 / 36 m/min • Max. turning diameter: Ø 300 mm • Max. turning length: 528 mm • Chuck size: • 6” / Ø 150 mm, 5” / Ø 120 mm • Max. spindle speed: • Main spindle 6,000 rpm • Sub-spindle 6,000 rpm • Bar capacity: Ø 51 / 32 mm • Main/sub-spindle motor power: Gtodpfxoyinklo Afneu • 11 / 15 kW, 3.7 / 5.5 kW • Tool turret with 12 stations, all stations driven • 5,000 rpm 3.7 / 5.5 kW • Heavy-duty one-piece slant bed made of stabilized Meehanite cast iron, with precision linear guides on all axes • High-performance spindles with A2-5 / sub A2-4 spindle nose • Automatic tool measurement arm • Parts catcher • Full enclosure • Hydraulic system • Coolant unit with retractable tank, 6 bar pump included • Ergonomic swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Hinged belt chip conveyor with 1,200 mm discharge • Foundation bolts and machine base plates

Condition: like new (used), Year of construction: 2024, • Control: Fanuc 0i-TF Plus LCD with Manual Guide I • Rapid traverse X / Z / B: 36 / 36 / 36 m/min • Y-axis travel: + / - 55mm • Max. turning diameter: Ø 300mm • Max. turning length: 478.5mm • Chuck size: 6” / Ø 150mm, 5” / Ø 120mm • Max. spindle speed: Main spindle 6,000 rpm / Sub spindle 6,000 rpm • Bar capacity: Ø 51 / 32mm • Main/Sub spindle motor power: 11 / 15 kW, 3.7 / 5.5 kW Godpfsyik Rujx Afnjtu • Tool turret with 12 stations, all driven • 5,000 rpm 3.7 / 5.5 kW • Robust machine one-piece slant bed in stabilized Meehanite cast-iron with precision linear guides on all axes • High-performance spindles with spindle nose A2-5 / Sub A2-4 • Automatic tool measuring arm • Parts catcher • Fully enclosed guarding • Hydraulic unit • Coolant system with extendable tank, 6 bar pump • Ergonomic, swiveling control panel • Electronic handwheel • Waterproof LED work area lighting • Transformer

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. This item is part of an online auction. The sale is subject to the approval of the seller. Gedpfx Asyc Sh Djfnotu

Condition: used, mileage: 124,500 km, power: 132 kW (179.47 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,040 mm, next inspection (TÜV): 02/2028, color: white, driver cabin: other, emission class: euro6, number of seats: 3, loading space volume: 23.7 m³, loading space length: 4,910 mm, loading space width: 2,090 mm, loading space height: 2,310 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, soot filter, traction control, Air conditioning, tachograph, central locking with remote control, electric front windows, onboard computer, driver assistance system: hill start assist, cruise control, speed limiter, multifunction steering wheel, daytime running lights, radio, touchscreen, Bluetooth, hands-free system, USB interface, Apple CarPlay, Android Auto, auxiliary heating, tinted windows, storage package, rev counter, driver’s airbag, anti-lock braking system (ABS), traction control (ASR), cab seats: driver’s seat with armrest and lumbar support, engine start/stop system, diesel particulate filter, electronic immobiliser, power steering, lightly tinted glazing, dual passenger seat, brake assist, driver assistance system: adaptive load control (LAC), electronic stability program (ESP), heated crankcase ventilation, body/construction: dropside with sliding tarpaulin, sleeper cab, wheelbase 4035 mm, drive type: front-wheel drive, 6-speed gearbox. Financing example: Godpfxjyf Uqgs Afnstu * Cash price: €35,699.00 * Down payment: €7,140.00 * Term: 60 months * Net loan amount: €28,559.00 * Effective annual interest rate: 5.99% * Fixed borrowing rate p.a.: 5.83% * Gross loan amount: €32,994.00 * Monthly instalment: €550.00 *Representative financing example provided by Santander Consumer Bank AG, Santander-Platz 1, 41061 Mönchengladbach for private customers, with the dealership acting as credit broker. Subject to credit approval. Figures also correspond to the 2/3 example under § 6a Abs. 3 PAngV.* Over 150 vans and minibuses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank—we are happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed features may need to be checked individually. Subject to change, error, and prior sale. Delivery available for an additional charge. Export license plates available onsite. Trade-in of your current vehicle possible. Retrofitting of the following is available (at extra cost): - Tow bars for up to 3,500 kg - Auxiliary heating systems - Display for reversing camera and/or navigation via smartphone (Android Auto) - Reverse system with rear camera - Workshop fittings - Cruise control - Retrofitting of tail lifts (LBW) and additional custom solutions for your business needs.

Condition: used, mileage: 98,700 km, power: 132 kW (179.47 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,040 mm, next inspection (TÜV): 02/2028, color: white, driver cabin: other, emission class: euro6, number of seats: 3, loading space volume: 23.7 m³, loading space length: 4,910 mm, loading space width: 2,090 mm, loading space height: 2,310 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, soot filter, traction control, Air conditioning, tachograph, central locking with remote control, electric front windows, on-board computer, driver assistance system: hill-start assist, cruise control, speed limiter, multifunction steering wheel, daytime running lights, radio, touchscreen, Bluetooth, hands-free system, USB interface, Apple CarPlay, Android Auto, auxiliary heater, tinted windows, storage package, rev counter, driver's airbag, anti-lock braking system (ABS), traction control system (ASR), cab seats: driver's seat with armrest and lumbar support, engine start/stop system, diesel particulate filter, electronic immobilizer, power steering, lightly tinted glazing, twin passenger seat, brake assist, driver assistance system: adaptive load control (LAC), electronic stability program (ESP), heated crankcase ventilation, body/superstructure: dropside with sliding tarp, sleeper cab, wheelbase 4035 mm, drive type: front-wheel drive, 6-speed gearbox. Financing example: * Cash price: €36,712.00 * Down payment: €7,342.00 * Term: 60 months * Net loan amount: €29,370.00 * Annual percentage rate: 5.99% Gsdpfxjyf Uqao Afnotu * Fixed debit interest rate p.a.: 5.83% * Total loan amount: €33,930.00 * Monthly installment: €566.00 *Representative financing example from Santander Consumer Bank AG, Santander-Platz 1, 41061 Mönchengladbach, for private customers, for whom the dealership acts in an advisory capacity as a credit intermediary. Subject to credit approval. Information also corresponds to the 2/3 example in accordance with § 6a para. 3 PAngV. Over 150 transporters and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank, or Auto Europa Bank—we are happy to advise you. This offer is non-binding; no guarantee is given for specification details. Listed equipment may need to be verified separately. Subject to changes, errors, and prior sale. Delivery available for an additional fee. Export license plates can be arranged locally. Trade-in of your old vehicle possible. Retrofitting available for: - Tow bars (up to 3,500 kg) - Auxiliary heaters - Screen for reversing camera and/or navigation via smartphone (Android Auto) - Rearview system with backup camera - Workshop equipment - Cruise control - Retrofitting of a tail lift (LBW) and other individual solutions for your business needs possible for an additional fee.