Used Minarctig 180 for sale (10,243)

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Room volume: 3300 liters Data for temperature tests: Temperature range: -70°C to +180°C Spatial temperature deviation: ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the usable space: ± 0.5 - 1 K Temperature change rate (according to IEC 60068-3-5) Heating: 1.5 K/min Cooling: 1.5 K/min Data for climate tests: Temperature range: +10 to +90°C Humidity range: 10% RH up to 98% RH Temperature fluctuation over time ± 0.2 to -0.5 K Humidity fluctuation over time ± 1% RH to ± 3% RH Dew point range +5°C to +89°C Mechanical load data: of the test chamber floor 150 kg Maximum chamber floor load 250 kg Dimensions of the test chamber: Width 2000 mm x Depth 1150 mm x Height 1510 mm External dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Njdpfx Aaju Au Ers Ejlk Operating data: Test chamber lighting: Halogen bulb 12 V, 20 W Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power 15 kW, Rated current 34 A External control via the RS 232 interface is of course possible. Refrigerant: R404A / R23 Weight: 1550 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left GKF 180°-1270-1100-IR1200 -- NEW RA1945 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm Nljdpfxsq N Hmhj Aa Eok belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Nlodox Nhf Tjpfx Aa Eok Price: On request

Condition: used, machine/vehicle number: 4966, Rotor diameter: 200 mm Rotor width: 180 mm Rotor blade: 3x4 Nsdpfxjxyax Do Aa Eolk Stator knives: 2 Inlet cross-section approx. 200 x 180 Drive motor: 3 kW

Condition: good (used), Year of construction: 2000, Automatic Sheet Feeder Automatic Laminating Unit EK 130/180 Automatic BAT Sheet Seperator Automatic Stacker Nlodpfx Aoh H Dqhoa Esk Max. Size : 1300 x 1800 mm Production Capacity Max : 50 m/min Technical data can vary according to job, consumables and possible other factors

Condition: refurbished (used), pull-out unit Roller width 180 mm Njdpfx Aasnvf Tbo Ejlk 2 powered rollers below 2 without drive above

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Njdoru Dzuopfx Aa Eolk Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2001, Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Nledpfx Aaerixkbj Esk Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, width 800 mm Nljdpfx Aaeu Immlj Eok depth 380 mm height 1800 mm weight 70 Kg Cabinet with 4 shelves. Maximum load per shelf 40 kg. Color code 7035. Weight 75kg.

Condition: good (used), Year of construction: 1998, table diameter 1800 mm turning diameter 2060 mm Nedpsw H Dkmsfx Aa Eolk swing diameter 2000 mm work height max. 1557 mm power capacity - milling spindle 30 kW workpiece weight 12 t table drive 100 kW gear box 2 Stufen grinding spindle drive 30 kW milling spindle SK50 with Grinding device

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Nlodpowcwizefx Aa Eok -Tool slide: Support slide support carrier with turning tool holder -Clamping height: 40 mm -Dimensions: see photos -Dimensions: 370/180/H170 mm -Weight: 17.8 kg

Condition: excellent (used), Here we offer a climate test chamber. Climate cabinet RS SIMULATORS KS600/70 AIR COOLED Climatic test chamber -70/180°C + humidity Last maintenance and leak test carried out 03/2024 by RS simulators Nledpfx Aasvu Ui Rj Ejk Here we offer a climate test chamber. RS climate test chamber air-cooled Refrigerant: R404/R23 Temperature range -70°C to + 180°C Time deviations +/- 0.5 K with empty test chamber Average heating and cooling time approx. 2 K / min Humidity range 10% to 95 % External dimensions: width 1200 mm depth 1600 mm x height 1995 mm Test chamber dimensions width 840 mm x depth 840 mm x height 840 mm Nominal voltage: 3/N/PE AC, 400 V, 50 Hz Nominal power: 7.5 KVA Nominal current: 15 A Fuse, on-site: 16 A slow-blow Side feedthrough Cabinet is air-cooled Refrigerant R-404A/R23 Weight approx. 600 kg Type: KS 600/70

Condition: excellent (used), Vötsch Model: VT³ 4150 Nlsdpew Ehutofx Aa Esk Vötsch Temperature Test Chamber, Air-Cooled Temperature Testing Temperature Range: -40°C to +180°C Rate of Change: Cooling approx. 2.5 K/min Rate of Change: Heating approx. 3.5 K/min External Dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test Chamber Dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 11.5 kW Rated Current: 22.0 A Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information: We perform the following steps on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left GKF 180°-1170-1000-IR1200 -- NEW RA1944 Technical data: Conveying length middle radius (NL): 5340 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Nledpfx Aoq N Hmdsa Esk Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 1982, Table width 1.8 m Strokes per min. 30 - 150 Nlodpfx Aaovi Iimo Esk Weight 47.000 KG

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Nlsdpfxeukg Srs Aa Eek Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: used, Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump,, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Enerpac, hydraulic hand pump -Type: unfortunately without type designation -Pressure range: bar -Housing: aluminum -Number: 1x hand pump available -Price per piece Nlsdpfokahi Usx Aa Eok -Dimensions : 700/180//H170 mm -Weight: 8,9 kg/pc.

Condition: used, roller curve right or left tight division 90°/190°-660-600 IR500 RA2314 Make: Running direction: 90° right running/ left running Roller width (RB): 600 mm conical, plastic coating Nominal/outer width (NB): 660 mm Center roller axle distance: 60mm, 3mm roller distance Inner radius (IR): 500 mm Nedpfeuxg U Dex Aa Eslk Overall height frame: 120 mm Height including motor: 400 mm Motor MOVI-Mot 3x300-500V 0,25kW 1400 u/min max Brake 220-240V Gear motor: SEW Conveyor speed: 0.6 m/s 2 90° curves can be screwed together to 180° Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Industrial oven, drying oven Type: PKL-1 Maximum temperature: 180 ° C Nljdpod Tiu Iefx Aa Eok The temperature is adjustable Number of tablets: 10 Size of Table: 70x50 cm Individually lockable electrical latch Oven dimensions: Height: 1450/1900 mm Width: 1250 mm Depth: 850 mm Weight: 350 kg We have 3 pieces on Stock!

Condition: used, Starter Bosch -Manufacturer: Bosch starter 12 V, unfortunately without type designation -Voltage: 12V -Teeth: 10 Nledsit Rmfepfx Aa Ejk -Magnetic coil: Type -Dimensions: see photos -Total dimensions: 340/180/H115 mm -Weight: 13.8 kg

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right GKF 180°-1170-1000-IR1200 RA1964 Technical data: Conveying length middle radius (NL): 5341 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Njdpfxoq Rim Ae Aa Ejlk Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Core for crane traverse, adjustable traverse, crane traverse, hall crane, crane hook traverse, load traverse, heavy load traverse, -Heartpiece: for crane traverse, sheet metal upper traverse .: 1031 4140 G-12-02-02 -Dimensions: see photos Nledpfxev Hm Sze Aa Ejk -Quantity: 2 pieces available -Price: per piece -Transport dimensions: 350/180/H310 mm -Weight: 17.7 kg/piece

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Nedpfx Aaju I Hpye Eolk -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm Nljdpfsv Rxkdjx Aa Esk -Weight: 13.3 kg

Condition: used, Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm Nljdpfx Aasb E N Tto Esk -Thickness: 18 mm -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg