Used Milling Turning for sale (15,288)

Condition: excellent (used), Year of construction: 2016, MAZAK Integrex i-300 1000U Max. machining diameter: 658 mm Max. machining length: 1,010 mm Max. main spindle speed: 4,000 rpm Max. bar diameter: 80 mm Iaedjx A Ub Eepfx Ag Ujl The machine is equipped with: - Mazatrol SmoothX CNC control - SCHUNK three-jaw chuck, diameter 254 mm - Tool Eye - C-axis - Y-axis - Number of tool positions: 110 !!! - Tailstock - Reinforced coolant pump - Chip conveyor

Condition: good (used), Year of construction: 2017, MAXXMill 350 [ Technical Data ] Travel and Tolerances Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Distance spindle nose – table surface (min. - max.): 70 / 370 mm Swivel range B-axis: +/-100° Rotary range C-axis (rotary table): 0 – 360° Feed Rapid traverse X-Y-Z axis: 30 m/min Max. rotational speed B-axis: 20 rpm Iaodpfx Asx H T Eysg Uel Max. rotational speed C-axis: 25 rpm Max. motor feed force X-axis: 3000 N Max. motor feed force Y-axis: 3000 N Max. motor feed force Z-axis: 3000 N Max. acceleration X-Y-Z-axis: 4 / 3 / 3 m/s² Swiveling Rotary Table Table diameter: 400 mm Table height from floor: 860 mm Number of T-slots: 5 Slot spacing: 75 mm Slot width: 14 mm Max. permissible workpiece weight (evenly distributed): 50 kg Main Spindle (mechanical spindle) Spindle speed: 50 – 12,000 rpm Max. torque: 33 Nm (S6) Max. power: 7 kW (S6) Tool taper: ISO 30 DIN 69871 Pull stud: DIN 69872A Direct drive with coupling Tool Magazine Number of tool stations: 20 (30, 50) ISO 30; 30 (50) HSK-A40 Tool change concept: changing arm Tool management: random Tool change time (tool-to-tool): 2 sec Max. tool diameter: 63 mm Max. tool diameter (without adjacent tool): 100 mm Max. tool length: 200 mm Max. tool weight: 5 kg Max. drum load weight: 60 / 70 / 100 kg Coolant System Coolant tank capacity: 120 l Standard coolant pressure: 2 bar Max. delivery rate at 2 bar: 40 l/min Pneumatics Min. supply pressure: 6 bar Min. supply volume: 200 Nl/min Lubrication System Spindle: grease Roller guide: oil / central lubrication Ballscrew: oil / central lubrication Dimensions Overall height: 2300 mm Installation area (W x D): 1630 x 2300 mm Weight: 3800 kg

Condition: excellent (used), Year of construction: 2007, TECHNICAL DETAILS CNC Control: FANUC 18i-TB X1/X2 Axis mm: 555/185 Z1/Z2 Axis mm: 1,095/1,140 Y Axis mm: 160 (+/- 80) B Axis mm: 240 (+/- 120) Maximum Turning Diameter mm: 550 C Axis Increment: 0.001° Maximum Turning Length mm: 1,020 Cutting Feed Rate mm/min X,Z,Y: 500 Rapid Traverse Speed mm/min: X1, Z1: 24,000 Y: 16,000 B: 27,000 C: 200 (Z2: 24,000) (X2: 24,000) Swing Over Bed mm: Ø 750 Swing Over Cross Slide mm: Ø 600 Bar Capacity mm: Ø 65 (main) / Ø - (sub) Max. Rapid Traverse m/min X,Z,B-Y: - Spindle / Sub-Spindle: - Iaodpfjxxdmisx Ag Uel Spindle Speed rpm: 5,000 Spindle Power kW: 22/15 Torque Nm: - Main Spindle Bore: - Main Spindle Nose: A2-6 Milling Head: - Spindle Speed rpm: 10,000 Spindle Power kW: 15/11 Torque Nm: - Taper Type: CAPTO C6 Number of Tools in Magazine: 40 Turret: - Turret Positions: - Number of Driven Tool Stations: - Driven Tool Speed rpm: - Driven Tool Power: - EQUIPMENT Chip Conveyor, Hinged Belt Type: Included Bar Feeder Interface Adjustment Control: Included MACHINE DIMENSIONS Length mm: 6,070 Width mm: 2,682 Height mm: 3,011 Weight kg: 15,500

Condition: good (used), Year of construction: 2016, functionality: fully functional, Machine specifications: Swing diameter over bed: 385 mm Max. turning length: 650 mm Ijdpfx Asx Tux Ieg Ujal Max. turning diameter: 350 mm Description: The machine is in good technical condition, test run possible by prior arrangement. Tool holders included. The machine is prepared for a measuring probe. Manuals are included. Specifications: Turning diameter: Ø 350 mm (over bed 385 mm), Turning length: 650 mm (distance between centers 805 mm), Bar capacity (spindle bore): Ø 65 mm, Spindle speed: Max. 4,000 rpm, Weight: 3,265 kg, Power supply: 400 V, 50/60 Hz, VDI 30 tool holders.

Condition: used, Year of construction: 2011, Manufacturer: Colchester Model: Alpha 2800XS Year of manufacture: 2011 Iasdpfx Agex Rra Rs Usl Control system: Fanuc 21i-TB – a proven platform for precise and fast machining control Turning diameter over bed: 800 mm – suitable for large workpieces Turning diameter above the slide: 500 mm Maximum turning length: 1500 mm – ideal for long parts C-axis: Yes – allows advanced operations such as off-axis milling and drilling

Condition: used, Year of construction: 2015, functionality: fully functional, Type of control Mazatrol Matrix 2 Max. workable diameter ( Upper turret) Ø 658 mm Max. workable diameter ( Lower turret) Ø 420 mm X Axis Travel 260 mm Y axis travel 260 mm Z Axis travel 1,585 mm W-Axis Travel 1,539 mm X2 axis travel 230 mm Z2 axis travel 1,388 mm B axis -30° ~ 210° Spindle connection Capto C4 Self centering spindle 12" Spindle bar passage 102 mm Spindle speed 3,300 rpm Spindle power 30 Kw Spindle nose A 2-8 Self centering secondary spindle 10" Secondary spindle bar passage 80 mm Iasdpjx Rzchefx Ag Usl Secondary spindle speed 4,000 rpm Secondary spindle power 18,5 Kw High pressure 70 Bar Milling spindle rotation speed 12,000 rpm Tool turret 9 positions Probe Renishaw Equipment Chip conveyor

Condition: excellent (used), Year of construction: 2014, Type: CNC Lathe (Horizontal) Manufacturer: Mazak Model: Quickturn Nexus 200-II MY Year of manufacture: 2014 Control: Mazatrol Matrix Nexus Origin: Japan Condition: In production use – age-appropriate wear Operating hours: 1-shift operation Specifications X-axis: 230 mm Y-axis: 100 (+/- 50) mm Z-axis: 575 mm Max. swing diameter: 675 mm Max. turning diameter: 380 mm Bar work up to diameter: 65 mm Iedox Nxlqspfx Ag Uoal Turret: 16 stations, all driven-tool capable Spindle speed: 4,500 rpm Accessories: Chip conveyor, collet chuck, many collets, approx. 8 driven tool holders, approx. 20 standard tool holders, Tool Eye, extraction unit, IRCO Profimat 52.6 magazine (year 2006), documentation

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine No.: ZN022, Control: Siemens Sinumerik 840D sl Powerline, incl. electronic handwheel, 2 spindles, 2 work areas, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, live tooling stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage +++ Attention: Machine is part of an online auction! +++ Iaodpfsx Ahfwjx Ag Uol

Condition: good (used), Year of construction: 2008, Year: 2008 FANUC 0i Series Control Swing over saddle: 500 mm Bar capacity: 76 mm Spindle size: 315 mm (12″) Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Iasdpfxjx Rrf Tj Ag Ujl Swing diameter: 630 mm Tailstock quill diameter: 100 mm Tailstock quill stroke: 100 mm Taper MT #5 Turret positions: 12 stations Driven turret speed: 5000 rpm Rapid traverse XZ: 20 x 24 m/min Spindle motor power: 22 kW Spindle nose: A2 #8 Spindle speed: 3500 rpm Boring bar holder diameter: 50 mm Tool dimensions: 25 x 25 mm X-axis travel: 242 mm Z-axis travel: 1100 mm Machine dimensions: 3418 x 1670 x 1735 mm Machine weight: 4700 kg

Condition: used, Year of construction: 1998, operating hours: 40,519 h, functionality: fully functional, machine/vehicle number: 315546, turning length: 1,000 mm, turning diameter: 440 mm, spindle speed (max.): 3,600 rpm, spindle bore: 80 mm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,000 mm, type of input current: three-phase, bar passage: 72 mm, total height: 1,900 mm, total length: 5,560 mm, total width: 2,190 mm, overall weight: 7,500 kg, We are offering this used Gildemeister CTX-500 E CNC turning and milling center, year of manufacture 1998. Machine type: CTX-500 E Serial number: 315546 Iaodpfxox Rhtts Ag Ujl Year of manufacture: 1998 Well-maintained machine in original paint. Accessories: Chip conveyor Exhaust air filter 3 driven tools Various tool holders Various jaws If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2006, functionality: fully functional, The used SPINNER TC77 SMCY counterspindle Y-axis motorized cnc lathe is a robust CNC tilting lathe with ASA 8" size flat guideways, with BARUFFALDI automatic 2-speed gear-driven range change, equipped with a counterspindle and spindle both with "C" axis and a motorized Y-axis turret with 120mm travel (+60/-60 mm) VDI 50. Completing the configuration is the FANUC i-series cnc with color lcd and Manual Guide i conversational programming, ethernet interface, RS 232 port and memory card for program entry, chip evacuation, 315mm BB 3-jaw hydraulic chuck, a set of motorized toolholders (10 pieces) and several fixed ones, and a large set of clamps. Main features: Ijdpfx Asuizukog Uoal Maximum turning diameter 690 mm Max. standard turning diameter 500 mm Max. workpiece length 800 mm Max. main spindle bar diameter 77 mm Max. secondary spindle bar diameter 52 mm Main spindle chuck self-centering 315mm Secondary spindle chuck chuck 210mm Max. x-axis travel 360mm Max. Y-axis travel 120 mm (-55/+65) Max. z-axis travel 980 mm Main spindle ASA 8" 26kW main spindle up to 1030 Nm torque and max. 4000 rpm. ASA 6" 18kW secondary spindle ASA 6" up to 113 Nm torque and rpm of maximum 4000 rpm. 12-position VDI 50 tool changer turret (rotating 4,000 rpm). Machine weight: approx. 6,000 kg Year of construction 2006, installed 2008, with about 5,800 working hours; "CE" compliant complete with manuals.

Condition: used, Year of construction: 2003, Technical details: turning diameter: 120 mm turning length: 100 mm control: Fanuc Spindle 1 power: 7,5 kW Spindle 1 RPM: 4500 1/min Spindle 2 power: 7,5 kW Spindle 2 RPM: 4500 1/min Distance between spindle noses: 600 mm Iaedpsxlrf Tefx Ag Usl Turret No.1 stations / rotary tools: 15/15 Power rotary tools turret 1: 2,7 kW RPM of rotary tools turret 1: 4000 1/min Turret No.2 stations / rotary tools: 15/15 Power rotary tools turret 2: 2,7 kW RPM of rotary tools turret 2: 4000 1/min Travel x/z turret 1: 250 / 300 mm Travel x/z turret 2: 250 / 920 mm Bar capacity spindle 1: 51 mm Bar capacity spindle 2: 51 mm power chuck: 165 mm Spindle bore sp. 1: 62 mm Spindle bore sp. 2: 62 mm dimensions of the machine ca.: 3700 x 2300 x 3000 mm weight of the machine ca.: 5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 120 x 100 mm Doublegripper capacity 2 x 3 kg *

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH Iaedpfx Ajx A Eupsg Ujl

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Iasdpfx Agex An Uxj Ujl Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Hobbing function

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Ijdpfxsx Atyao Ag Ujal

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Ijdpfx Agjx Ih Dgs Usal

Condition: ready for operation (used), Type: TVM 450/5 Uitzonderlijke frees- en draaibank voor verticale bewerking die zeer grote werkstukken kan bewerken. Zowel de binnen- als de buitendiameter van de werkstukken kunnen worden bewerkt! De machine bestaat uit een vaste buitenkolom en een beweegbare binnenkolom. Draaitafel: buitendiameter: 6300 mm binnendiameter: 3000 mm grootste diameter van het werkstuk: 9800 mm kleinste diameter van het werkstuk: 2220 mm maximaal gewicht op tafel: 300 ton rotatiesnelheid: 0,08 27 tpm rotatiesnelheid bij draaien/frezen: ,4 tpm Vaste externe kolom: ramafmetingen: 550 x 550 mm diameter van de spindel: 304,8 mm ISO 60 - 37 kW op spindel maximale hoogte van uitwendig draaien/frezen: 8700 mm min. hoogte van uitwendig draaien/frezen: 700 mm verticale slag: 8000 mm horizontale slag: 2030 mm Beweegbare binnenkolom: RAM-formaat: 280 x 280 mm max. diameter van inwendig draaien/frezen: 5180 mm min. diameter van inwendig draaien/frezen: 3048 mm max. hoogte van inwendig draaien/frezen: 5800 mm min. hoogte van inwendig draaien/frezen: 615 mm verticale slag: 5800 mm horizontale slag: 1120 mm Spiltoerentallen: 1,2 601 tpm Iodpoxqh Stjfx Ag Usal Totaal vermogen: 250 kW 5-assige CNC-besturing

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 360 mm, turning diameter: 360 mm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, EMCO TURN 360 Isdpjx Hwa Uefx Ag Usal TURRET 12 CONTROL : SIEMENS SINUMERIK

Condition: like new (used), Year of construction: 2005, functionality: fully functional, CNC Lathe DAEWOO PUMA 2000 SY. Swing diameter over bed: 600 mm. Maximum turning diameter: 330 mm. Maximum machining length: 510 mm. Bar capacity: 65 mm. X-axis travel: 250 mm. Z-axis travel: 580 mm. Y-axis travel: +50 - 50 mm. B-axis travel: 580 mm. Main spindle: 18.5 kW - A2-6" - 4,500 rpm. Subspindle: 7.5 kW - A2-5" - 6,000 rpm. Driven turret with 12 positions (BMT). FANUC 18iTB control (Manual Guide i). Chip conveyor. Tool presetter. Parts catcher with conveyor belt. In very good condition. Iaodsx I Srnspfx Ag Ujl

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 Iaodjtqmqhjpfx Ag Uel x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" - Max. workpiece weight between centers: 100 lb Iaedpfjx Apkzex Ag Ujl - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52

Condition: used, Year of construction: 2020, operating hours: 4,500 h, functionality: fully functional, For Sale: HAAS ST-35Y CNC Lathe with Y-Axis We offer a HAAS ST-35Y CNC turning center in good working condition, designed for heavy-duty and high-precision turning operations. Key features: + Y-axis for off-center milling and complex machining + Live tooling + Large turning capacity + Rigid construction suitable for demanding parts + Reliable HAAS control, easy to operate and program + Well maintained and regularly serviced Typical applications: Iedpfxox Tgbbe Ag Ueal + Large diameter components + Flanges and shafts + Hydraulic and industrial parts + Low to medium volume production Machine condition: Fully functional, under power, available for inspection. Quantity: 1 machine Location: Europe Availability: Immediately / upon agreement Price and detailed technical specifications available on request.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,567 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 678 mm, bar passage: 70 mm, controller model: Fanuc 310i, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X1 travel: 165 mm Y1 travel: 80 mm (+50/-30 mm) Z1 travel: 678 mm X2 travel: 165 mm Z2 travel: 640 mm Main spindle Max. speed: 5,000 rpm Max. bar capacity: 70 mm Draw tube bore: 75 mm Torque: 191 Nm Power: 20 kW Sub-spindle Max. speed: 5,000 rpm Draw tube bore: 42 mm Torque: 108 Nm Power: 17 kW Turret 1 & 2 Tool stations per turret: 12 live Live tools: 4,000 rpm MACHINE DETAILS Control: Fanuc 310i Number of controlled axes: 8 Dimensions & Weight Machine dimensions: 4,400 mm x 2,000 mm x 2,300 mm Machine weight: 8.8 t Chip conveyor weight: 750 kg Operating Hours Automatic mode: 23,567 h Power-on hours: 51,273 h Iedpfx Asx Af Dkjg Uoal EQUIPMENT Chip conveyor 2 x collet chucks Parts conveyor Extraction unit Bar feeder FMB Turbo 8-80 / 3200

Condition: used, TURNING CENTER "MORI SEIKI" MOD. ZL 200SMC CNC MSC-501 Turning length: 452 mm Maximum turning diameter: 388 mm Maximum diameter over bed: 510 mm Center distance: 751 mm Spindle mount: A2-6 Spindle speed: 4,000 rpm Spindle motor power: 11 kW Number of tools: 12 Isdpfx Agsxwxwtj Uoal

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Iaodpfxer Ak S Nj Ag Ujl Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40