Used Mia for sale (128)

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw Rjdov Iccfopfx Aa Uop • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture Rjdpfemb U Tusx Aa Uop • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Skyrocket your steel cutting productivity and eliminate strenuous labour associated with steel cutting with a semi-automatic saw based on precision servo-motor actuation. Automatic detection of the material placed to cut with the machine setting itself to the shortest cutting stroke needed without you needing to adjust any limit sensors. Automatic detection of saw motor overload and reverse to alleviate. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø400 mm HSS blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Semi-automatic cutting with adjustable saw feed rate and blade RPM (20-100) Rsdpfx Aaomcbk Rj Uop • Spindle and drive unit immersed in oil solution for smooth performance and long service life • Mitering locking device stops at 45° left straight 90° and 45° right • Industrial ball-screw actuator with servo motor control of the saw stroke • Auto-detect of the material size results in short stroke & cut times without user input • Saw overload detection with feed modulation • Fully integrated flood coolant system • Every new unit comes with brand new HSS blade for ferrous cutting • Optional AS / NZS 4024:2014 safety guard with tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on press of a button • Safety switch disabling the saw operation when guard it up Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. Rsdpfxsmb U Tfo Aa Uep A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. Rjdpfjmb U Tbsx Aa Uop • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: new, Year of construction: 2026, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Rodpfx Aasmcbk Us Usp Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity Rjdpfxomb U T Hs Aa Usp • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow Rjdpfxemcaaho Aa Uop • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor Rsdpfxemb U T Rs Aa Uep • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light Rsdpfx Aaemb U T Uo Usp • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Rsdpfxomcaaws Aa Uop Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: refurbished (used), Divided into 30 parts Weight range: 32-70 g/pc. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 580 x 580 x 1350 Power (kW): approx. 0.74 Net weight (kg): 330 Rsdpfxott Am Ue Aa Uop

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. Rjdpfx Aasgwct De Uep We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, RISO GOCCOPRO DIGITAL SCREEN MAKER, MODEL Mi A4 A4 MAX SCREEN Maker Easy to operate. Ideal for artists, schools, professionals Inks from the free market, The set includes. 1. GOCCOPRO Mi A4 Digital Screen Maker 2. START UP KIT ( Mesh 70 & 100 X 10 shits each + Double Tape + 1 x Screen and 1 x work table + Squeeze)) Rjdpfx Aaeu I Uvhs Uop 3. cd with SOFTWARE TO PRINT 4. CABLES 5. INSTRUCTIONS

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Rsdpfx Aeyk Hrmoa Uep Face width: 160 mm Face length: 530 mm Horn length: 250 mm Anvil weight: 190 kg Height: 350 mm Base: 430 x 310 mm - 28 mm square hole for anvil tools - Drop-forged, hardened Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Good condition, very bright ring, good quality

Year of construction: 2000, condition: good (used), Siat HSD 312 - S Semi-automatic sheet wrapping machine Version with horseshoe turntable for easy loading with a pallet truck Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of construction: 2000 Capacity: 1200 kg Turntable: with fork recess Turntable diameter: 1500 mm Adjustable turntable rotation speed Motorized film pre-stretch adjustable to 100 % or 200 % Turntable height: 75 mm Wrapping programs Program 1 Double wrapping with lifting and lowering of the film trolley Rodpfepygwqsx Aa Usp Program 2 Double wrapping with lifting - pause for attaching the top cover of the pallet - and lowering of the film trolley Program 3 Single wrapping with only lifting of the film trolley Program 4 Single wrapping with lifting of the film trolley and pause for attaching the top cover Intended use Wrapping palletized loads with stretch film or in a net Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Year of construction 2007 Very good condition Set includes a wire unwinder 9/16" and 1/4"wire set tooling included Maximum binding length is 500 mm., minimum 50 mm. Machine speed is over 1500 cycles per hour. Effective productivity depends on operator skill and on the products’ features. Rjdpfx Aaoumw Ice Uep

Condition: new, Year of construction: 2026, machine/vehicle number: A1481630, Complete finishing line max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) Rjdpobqh R Tofx Aa Ujp speed up tp max. 1m/min. (higher speed possible) Please contact us for more information.

Condition: good (used), Year of construction 1997 Very good condition Uses wires on spools with diameters from 1/4” to 1” for a maximum binding thickness of 24 mm. Maximum binding length: 420 mm. Minimum binding length: 50 mm. Each diameter uses dedicated binding tools. Machine speed is over 1500 cycles per hour. Rodpfx Aajumxa Hj Usp

Condition: ready for operation (used), The crown corks are fed manually into the chute, the machine places the crown cork on the bottle and presses it on. Redpfx Aofh Dlrja Ujp

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Cutting Capacity at 90°: Rsdpfjv Ncpbex Aa Ujp Round: Up to 135 mm Square: Up to 120 mm Flat: Up to 70 x 280 mm Cutting Capacity at 45°: Square: Up to 105 mm Flat: Up to 55 x 210 mm Saw Blade Speeds: 2,250 and 4,500 rpm Motor Power: 5/6 hp (approx. 3.7/4.5 kW) Weight: Approx. 650 kg Dimensions (L x W x H): Approx. 1,200 x 1,200 x 1,500 mm

Condition: used, Year of construction: 1997, machine/vehicle number: 972842, SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - Mobile pressure system - Right/left feeding Rsdpfx Aewr T Rmja Uep - Conveyor belt TSLR 6000X400 - N. 3 unloading tables mm. 1000x1200 - Waste belt conveyor TSS 45° mm. 2500 - Strapping machine SIVARON SS-80 - Year 1997

Condition: used, Year of construction: 2014, machine/vehicle number: 201409V, SECOND-HAND SEMIAUTOMATIC TRIMMING MACHINE FOR STRAIGHT AND SHAPED PANELS MOD. VSR FRAVOL - CE RULES - KW 1,5 - Volt. 230/50 Rjdpfowr Uhyjx Aa Usp - Matr. 201409V - Year 2014

Condition: new, Year of construction: 2025, SEMIAUTOMATIC BINDING MACHINE Redpobyhgwjfx Aa Uop Model; MAGRAF AS-48 NEW It allows great flexibility of use,11 different wire diameters without the need to change size-tools.

Condition: new, Year of construction: 2025, operating hours: 350 h, -compact&ideal solution for books covers,box files,photo albums,clip pads,game boards,note books,disries etc. -easy format change over Redpfecwgxfex Aa Ujp