Used Mesh Welding Machine for sale (66,441)

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Gksdpfstuwz Ijx Acmed Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Gjdpfsvyk Sfox Acmokd Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Gkodewq Hp Tspfx Acmed Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Gkedpfxeqpgntj Acmod Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Gjdpfx Acsv Dxm Ssmokd Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Gedpfoztyn Sox Acmjkd Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 Gkodpfxezd Rmgo Acmod The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Gkodpfx Acevg Rh Tsmed Weight (without cable) 23 kg New, unused

Condition: good (used), Welding current: 10 - 200 A Weight: 103 kg Gkjdpfoyrglcex Acmsd Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Gsdpfx Acsxf Hv Hsmskd Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: good (used), 1 used water-cooled spot welding machine Technical data: Max. welding power: 23.7 kVA Rated power at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Gkjdey Naq Ispfx Acmsd Coolant flow rate: 4 l/min Weight: 77 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Gkedpfsw Rm Sasx Acmed Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Gkodpfxevuz N Rj Acmsd Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm Gjdpfsvyq Duox Acmjkd -Weight: 12.1 kg

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface Gkedpfx Aoy N Du Rocmod - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Gkodpfx Ajyhq A Rjcmjd Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: excellent (used), Pneumatically operated, parallel-guided spot welding machine Brand: DALEX Type: PMS 10-4 Throat Depth: 550 mm with double-stroke cylinder and approach stroke Rated power at 50% duty cycle: 50 kVA Secondary short-circuit current: 24 kA Secondary open-circuit voltage: 5 V Electrode force: 65-390 daN Weight: 425 kg Gkjdpfx Ajyh Hlxscmed with mounted control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Sample photo Machine is currently being refurbished.

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Gedoxddamepfx Acmekd

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA – Timer – 380 V Gkjdpfx Acovbr Dljmed

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Gedpfxsviv Azs Acmekd

Condition: used, Technical details: current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! i.D. * Gsdpfxsu Nwxbe Acmskd

Condition: used, Technical details: plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm Gksdpfxou Ngfqe Acmsd WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Godpfxswgi Sie Acmekd Description has been adopted.

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm Gjdpfx Ajd Af Shscmskd - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW - Space requirement: approx. W 550 x D 500 x H 700 mm - Weight: approx. 65 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 99 C 70090, Offer 19013 Technical data: - Nominal power at 50% duty cycle 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Welding values for sheet steel 3.0 + 3.0 mm Gkodpfxev Du Dae Acmed - Projection approx. 100 mm - Arm distance 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water quantity approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Suspension bracket with gimbal ring