Used Projection Welding Machine for sale (86,001)

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Itsdpfjxyqn Ajx Aa Esr Throat depth: 250mm --- Weld control: Digit 8 --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 50 SC AC Resistance Welding Machine Machine No. 0723122BA0001 Year of Manufacture 2007 Power at 50% duty cycle: 50 kVA Power at 100% duty cycle: 35 kVA Maximum welding power: 156 kVA Thrust 350 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Max. cylinder stroke: 80 mm Max. electrode force: 730 daN (at 6 bar), continuously adjustable Operating air pressure: 3.5 to 6 bar Mains connection: 400 volts, 50 Hz Connected load: 117 kVA / 100 amps / Cable cross-section: 3 x 35 mm² - Welding control: ARO Micro 2X16 III Version 10T16P (6 times - 16 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guide - Single-stroke welding cylinder - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently attached to the machine - PC interface RS 485 - Spot weld counter - Operating instructions and electrical diagram included Space requirement L x W x H 650 x 950 x 1770 mm Itodpov Hruhefx Aa Ejr Weight 330 kg Good condition

Condition: good (used), functionality: fully functional, Projection welding machine from Messer Griesheim, modernized by Schmidt & Bender. Fully functional. All documentation is included. The cooling unit is included, but it has a defect. It may only be a minor issue and hasn't been examined in detail. Isdpjwa Sqnsfx Aa Ejtr

Condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs, spot welding machine, projection welding machine, projection welding machine -Manufacturer: Aro, projection welding machine, spot welding machine, water-cooled, type N601 -Welding power: 65 kVA -Welding control: Aro 25-002-2 Isdpfx Aohx E T Uoa Estr -Transport dimensions: 1000/510/H1720 mm -Weight: 538 kg

Condition: excellent (used), Combined spot and projection welding machine Brand: DALEX Model: PMS 11-4, Version "B" Throat depth: 350 mm Rated power at 50% duty cycle: 100 kVA Iedpowz Rz Isfx Aa Estr Secondary short-circuit current: 59.2 kA Secondary open-circuit voltage: 2.15–4.33 V Electrode force: 190–1140 daN with 4-position switch Mounted control cabinet according to VDE 0100 with main switch Synchronous welding control with monitoring function MPS 8043-1 IQ1 Selector switch for operation with two-hand safety console and foot pedal Sample photo Machine currently under refurbishment.

Condition: used, Year of construction: 2001, - Rated power 100 kVA - Connected power 275 kVA - Incl. HELLER cooling unit Ijdpfx Aaowgb I Aj Ejtr - Weight approx. 800 kg

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition Isdpev Dxm Sjfx Aa Eetr

Condition: excellent (used), Projection welding machine Brand DALEX Type PM 32-5 Rated power at 50 & duty cycle: 160 kVA Secondary short-circuit current: 80 kA Secondary open-circuit voltage: 9.75 V Electrode force: 215-1,290 daN Ijdowhz Ilepfx Aa Ejtr Single-stroke cylinder - electrode stroke 100 mm Throat: 250 mm with attached control cabinet according to VDE 0100 Main switch Synchronous welding control MPS 200 Example photo Machine is currently being refurbished

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide Iedpfx Aaohpf Iyj Ejtr - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: excellent (used), overall weight: 955 kg, projection welding machine execution B/DHZF projection 350 mm Make DALEX Type PMS 34-4 rated power at 50 % ED: 160 kVA Sec. short-circuit current: 99 kA Sec. open-circuit voltage: 5.8 - 9.74 V electrode force: 140-2,040 daN with 4-step switch add-on control cabinet according to VDE 0100 with main switch Ijdpfjp H T Adox Aa Ejtr Synchron-100 program control MPS 8043/1

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Year of manufacture 1993 Itodjguvtdepfx Aa Ejr Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Capacitor discharge welding machine MEGATRONIC type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimum welding times. Spot projection welding machine The CD (Capacitator-Discharge) welding technology works on the principle of transformed capacitor discharge. Masch. No. 352 / 92 Year of construction 1993 Very high welding power with relatively small power supply. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat sensitive components - welding of steels with high carbon content - welding of surface coated workpieces rated power 12288 Ws Uc 3200 Volt Capacity 2400 µF Open circuit voltage 10 volts Electrode force 200-2000 daN infinitely variable Operating air pressure 6 bar Mains fuse min. 35 Amp. Operating current 32 Amp. Mains connection 400 Volt, 50 Hz - Programmable control megapuls CD-12000 Itjdpfx Aoguvtasa Eer - pralleler electrode guide - Electrical 2-hand control panel adjacent - Switch cabinet with control fixed to the machine weight 3000 kg good condition

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Iedehubgzspfx Aa Estr Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine Iodpfjxy Hqtex Aa Ejtr -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Itsdpfx Aaoxfrv Ej Eer

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Itsdpfeuxbx Dsx Aa Eor

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ Itsdpfxewbixrs Aa Eor ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 350 A, welding current at 100% duty cycle: 300 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Teamwelder MIG 400 Synergic Puls DW 5-400 AMP 400 Volt Synergic Pulse Water-cooled 2/4 Step 4 Roller drive Fixed programs Steel – Stainless Steel – Aluminum weldable Refurbished – Serviced – Tested Including PRO5000 Welding torch, ground cable with clamp, gas cable, interconnection package, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Itedpfx Ajx Ig E Aja Eor Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), MIG/MAG welding machine Itedpfx Aob A Igboa Eer -Max. welding power: 400 A -Four-roller feed -Water-cooled -Hose package -with removable wire feeder -incl. ground cable -Gas valve

Condition: refurbished (used), Year of construction: 2013, warranty duration: 3 months, type of cooling: water, welding current (max.): 565 A, For sale: Miller PipeWorx 400 565 AMP (60% 500A, 100% 400A) 380 Volt 2013 Water-cooled Pulse RMD Programma memory Elektrode option Steel + Stainless Steel weldable Refurbished, tested, and serviced. Test welding possible Including 1,0-1,2mm feed rolls, 2x PRO5000 MIG welding torches, earth work lead with clamp, gas cable, transport cart, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Itsdpex Hpmgofx Aa Eer The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine Itjdsb A Ivmspfx Aa Eor -Voltage: pneumatic -Weight: 270 kg

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Oerlikon, Inverter welding machine type CITISTICK 160 -Welding current range: 5-160A Itsdpfex Ir Ipex Aa Eer -Mains connection: 230V -Accessories: Welding cable with electrode clamp, ground cable -Dimensions: 430/300/H340 mm -Weight: 11 kg

Condition: good (used), MIG/MAG welding machine, MIG/MAG welding machine Iedpsb A Hhvefx Aa Estr -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Migatronic, MIG/MAG welding machine -Type: FLEX 3000 C -Max. welding power: 300 A -Air-cooled -Wire feed: 4-roll drive -Accessories: incl. ground cable, gas valve, hose assembly (see photos) -Dimensions: 920/450/H1065 mm Iedpfx Aex Hwlksa Estr -Weight: 70 kg

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Thermal Arc, TIG welding machine, inverter welding machine type LS-300 -Welding power: max. 300 A -ground cable -Dimensions: 410/210/H435 mm -Weight: 21.1 kg Itedpjx Hwcvjfx Aa Eor