TIG welding machine

KEMPPI Kempag 200 / TIG

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location Csdpfx Aezawm Hsd Ishc - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Year of construction: 1990, condition: used, A mobile package crosscut saw for sawn timber is offered. Guide bar length: 1200mm, guide bar type: STIHL, chassis: manually movable, control: manual. Equipped with STIHL guide bar, robust chassis with pneumatic tyres, CEE plug with cable, protective guard. Weight: approx. 250kg, overall dimensions X/Y/Z: approx. 1500mm/800mm/2500mm. Inspection by arrangement is possible. Chjdpfezyq Tfjx Ad Ijc

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, number of seats: 29, gearing type: mechanical, axle configuration: 4x4, emission class: euro3, color: white, suspension: steel, tire size: 365/80 R 20, wheelbase: 4,160 mm, Year of construction: 2025, Equipment: air conditioning, all wheel drive, power assisted steering, traction control, - Autoradio - CD - Heater LOOKING FOR A 4x4 PASSENGER BUS FOR DEMANDING OPERATIONS? Chedpfx Adjy Rtyls Isc When passenger transport needs to continue beyond paved roads, a conventional bus may not be enough. The Mercedes-Benz Atego 1725A 4x4 Passenger Bus combines a robust Mercedes-Benz commercial vehicle chassis with 29+1 passenger seats, 245 HP EURO 3 power, front and rear differential locks and off-road tyres. With independent passenger air conditioning, an insulated purpose-built bus body, rear-view camera and integrated roof rack, this Atego is designed for reliable passenger transport across remote sites, infrastructure projects and demanding regional routes. AT A GLANCE - Mercedes-Benz Atego 1725A 4x4 - 29 + 1 Passenger Seats - 245 HP / 180 kW - EURO 3 Diesel Engine - Front & Rear Differential Locks - Mercedes-Benz G 85-6 Manual Transmission - Mercedes-Benz VG550 Transfer Case - 365/80 R20 Off-Road Tyres - Independent Passenger Air Conditioning - Steel Body with Anti-Corrosion Treatment - Insulated Passenger Compartment - Aluminium Exterior Panelling - Rear-View Camera - Integrated Roof Rack Why This Configuration? Passenger transport becomes more challenging when the destination is located away from conventional road networks. The Mercedes-Benz Atego 1725A combines 4x4 capability with a dedicated 29+1-seat passenger body, creating a specialised solution for organisations that need to transport groups reliably across demanding operating environments. The Mercedes-Benz six-cylinder engine produces 245 HP / 180 kW, while the manual G 85-6 transmission and VG550 transfer case form the basis of the 4x4 drivetrain. Front and rear differential locks provide additional traction when conditions become difficult. Built for Demanding Routes Mining operations, infrastructure developments, construction sites and remote projects often require regular passenger transportation over gravel roads, unpaved routes and difficult access roads. That is where this Atego differs from a conventional passenger bus. Its 4x4 drivetrain, front and rear differential locks and 365/80 R20 off-road tyres provide the mobility required when paved-road transport is no longer enough. The result is a passenger vehicle designed to keep teams moving between locations where conventional buses may struggle. 29+1 Passenger Capacity The purpose-built body provides seating for 29 passengers plus one additional seat, using fixed-back seats throughout the passenger compartment. This provides practical capacity for transporting complete teams in a single vehicle while retaining the mobility of a two-axle 4x4 platform. An independent air-conditioning system with its own power pack supports passenger comfort, particularly during operation in warm climates. Purpose-Built Passenger Body The passenger body uses a steel structure with anti-corrosion treatment, aluminium exterior panelling and closed-cell polystyrene insulation. Marine plywood flooring provides a robust structural base, while a dedicated passenger entrance supports regular boarding and disembarking. Additional equipment includes a rear-view camera for easier manoeuvring and an integrated roof rack for luggage or additional equipment. Why Buy from Schaften Automotive? Since 1977,...

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min Chsdpfx Aotqqrfjd Ioc dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: used, used, good conditionmake Festotype ZA 101machine-No. 2668/SNumber of spindles 3 crosscut sawClamping height 1 x 140 mm 2 x 30 mmCrosscut saw 2,5 HPFence ruler LAS 1750 mm 1000 mm with turret stopWorkpiece clamping pneumaticSpace requirement approx. 1700 mm x 700 mm x 1400 mmPlace of storage 97447 Gerolzhofen, free loaded, unpackedDelivery in as-is condition, as inspectedwithout warranty and guarantee Cjdpjvwffzsfx Ad Iehc

Condition: new, Year of construction: 2026, Enclosed and secure sawing area for increased safety through a legally required saw guard. Anti-rotation mechanism for the wood thanks to stamped-in barbs on the saw frame. Sturdy, torsion-resistant steel frame. Transport device for easy movement. Impact-resistant, scratch-resistant, and weather-resistant thanks to high-quality powder coating. Phase inverter. Dimensions and weights Working height: 700 mm Saw frame support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Drive type: Electric motor with direct drive Electrical data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw blade Diameter: 700 mm Cutting capacity Csdpfx Ashkz Hiod Iehc Saw frame, round timber: 250 mm Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale.

Condition: good (used), Item: AJ-Hamba BK6005/5 Filling machine for cups HAMBA BK 6005/5 cup filling and sealing machine Made in Germany In good used condition. The machine can be used for filling yogurt and similar products in cups. Cedpfxji Atkqe Ad Ishc Capacity: 8000 - 10000 cups/ h Lanes: 5-Lanes longitudinal machine Actual Cup-size: Ø 75 mm Height: 90 mm Main Filler: - manufacturer: Hamba - filling range: 100 cm³ to 250 cm³; - cleaning: CIP-able Closure: Sealing Date Device: Stamp Measurements (lxwxh): 4,3 m x 1,3 m x 2,2 m Power: 380 V; 21 A; 8 KW

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Edgebanding, flush sawing, flush milling, chamfer milling, radius milling - Scraper, buffing unit Chodpfxowv Uq Ao Ad Ijc - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection port: 140 mm Ø - Workpiece width: min. 60 mm - Feed speed: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for coil material - WITHOUT pre-milling unit - Pneumatic cylinder new Shipping possible at additional cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, 3.7 kW motor Table length 260 cm Codpfoulg Szjx Ad Iohc Working width 100 cm With a cutter

Condition: excellent (used), Year of construction: 1995, WITH SLIDING TABLE AND FEED DEVICE Cjdpfx Adewcq Idj Iohc TABLE SIZE: 1350 x 850 mm MILLING SHAFT DIAMETER 35 mm MOTOR POWER 4 KW (5.5 HP) SLIDING TABLE SIZE: 900 x 350 mm FEED DEVICE WITH 4 ROLLERS