Used Masturn 50 for sale (34,899)

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2024, Well-maintained drilling machine for sale due to expansion; it was also overhauled in 2024 and has been in our inventory since 2024. Fpedpfxjzhby Se Aikep

Condition: new, fuel type: diesel, motor manufacturer: 1103A-33TG1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 979 kg Functional Generator capacity: 50 kVA Dimensions of cargo space: 230 x 103 x 143 cm CE mark: yes Other information Fuel consumption: 7.8 L/Hour at 75% Load Prime Generator: FG Wilson FGL20060 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 145 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames Fpedpfx Ajzc T Ulsikjp

Condition: excellent (used), lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), motor manufacturer: Perkins, fork length: 1,900 mm, total height: 2,900 mm, total length: 3,750 mm, total width: 2,080 mm, color: other, Year of construction: 2015 Empty weight: 7.920 kg Engine type: Perkins 854F-E34TAWF Lifting capacity: 5.000 kg CE mark: yes Technical condition: very good Visual appearance: very good Fjdszmdpyjpfx Aikopp = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Frankrijk Hydraulic fork adjuster with sideshift

Condition: excellent (used), lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), motor manufacturer: Perkins, fork length: 1,900 mm, total height: 2,900 mm, total length: 3,740 mm, total width: 2,080 mm, color: other, Year of construction: 2014 Empty weight: 8.369 kg Engine type: Perkins 854F-E34TAWF Lifting capacity: 5.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Beacon(s) - Blower - Parking Heater Fsdpjzmdq Dsfx Aikopp - Radio - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Frankrijk

Condition: used, mileage: 144,832 km, power: 368 kW (500.34 HP), first registration: 09/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,750 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,240 mm, total width: 2,550 mm, total height: 3,950 mm, loading space length: 6,300 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Remote-controlled central locking - Leather interior - Lift axle - Air suspension - Tow hitch - PTO - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Toolbox = Notes = Scania G500 8x4/4 Lift steering axle. Full air suspension. Side + rear view camera. HMF 5020 K6 6 x hydraulic extension. 4 x hydraulic outrigger. Winch. Fjdpfsz Nycaox Aikjpp Fly Jib FJ 1000 K5 Scanreco radio remote control. Trailer coupling. Toolboxes. Hydraulic extension. Hydraulic rear bumper. 2 x boat support leg. = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80% Rear axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80% Rear axle 3: Tire size: 385/65R22.5; Twin tires; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 22,465 kg Payload: 14,535 kg GVW: 37,000 kg Functional Crane: HMF Interior Upholstery: Leather Financial Information Price: On request Identification Model number: G500 8x4/4 / HMF 50 tm + JIB + W = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT, Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2007, operating hours: 2,408 h, load capacity: 2,400 kg, lifting height: 5,300 mm, fuel type: diesel, Equipment: cabin, JCB 524-50 telescopic handler, manufactured in 2007, with only 2,804 operating hours! ---- * Manufacturer: JCB * Model: 524-50 * Year of manufacture: 2007 * Operating hours: approx. 2,804 * Formerly military / Ex-Army! * With pallet fork * Includes 1 spare wheel and 1 box (see photos) * Load capacity: approx. 2,400 KG * Lifting height: approx. 5.3 meters * Video available upon request * Good condition * First owner! * Weight: 5,500 KG * Price: 23,900 Euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee. Errors and prior sale are subject to change. Fpedpfxe Ad Tris Aikjp

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 Fpodpfx Aiezrpu Ejksp with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm Fsdpfx Aju Ng T Ujikjpp slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo i.D. *

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW Fsdpfx Aieu Nvp Sjkspp type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm Fsdpju Idffefx Aikepp y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine approx.LxWxH: 11,5 x 6,6 x 8,4 m Fpjdpfx Aou Ix H Dsiksp NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: used, Year of construction: 1995, Technical details: x-travel: 800 mm y-travel: 510 mm z-travel: 510 mm control: Fanuc MSC 518 Spindle RPM: 10.000 1/min spindle drive: 22/18,5 kW rapid travel x/y/z: 32 m/min table-size: 1120 x 600 mm Fedpj Afzgvefx Aikepp tool changing time: 0,9 sec tool magazin:: 30 x BT 40 total power requirement: 51 kW weight of the machine ca.: 8,8 t

Condition: used, Year of construction: 2019, operating hours: 13,100 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Still RX 70 - 50 T HYBRID Gas-powered forklift 10 units in stock: RX 70-35 and RX 70 -50 * Power: 58 kW / 79 hp * Self-weight: 6,692 kg * Load capacity: 5,000 kg * Full cab * Heater * DUPLEX mount for 2 gas cylinders Lifting unit: * Duplex mast * Lifting height: 4,500 mm * 3+4 control circuits * Mounting of a platform with side shifter and fork adjustment possible! Lighting: Fpodpfxe Ahp T No Aikjp * 4 spotlights at the front * 4 spotlights at the rear - German forklift! - Used in a large company, with complete maintenance records! - First owner! - Ready for operation! Subject to errors and prior sale!

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Fpjdpfsz An S Rsx Aikep Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: used, axle configuration: > 3 axles, first registration: 09/2010, loading space length: 9,030 mm, loading space width: 2,540 mm, loading space height: 820 mm, total length: 13,850 mm, total width: 2,540 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 8,630 mm, color: red, Equipment: ABS, Nooteboom MCO-50-04V Fedoyf A Sropfx Aikspp 4 x steering axles. BPW axles. Remote steering with cable. 95 cm coupling height. Total length extended: 26.53 m. Loading bed: 903 cm + 650 cm + 650 cm. Loading height (loaded) 82.5 cm. = Further Information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Weights Unladen weight: 14,960 kg Payload: 33,440 kg GVWR: 48,400 kg Identification Model number: MCO-50-04V / 25MTR / 2X EXTENDABLE = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1500390, Double miter saw from Fom Industrie, model ALVA 50 A, with a 5-meter cutting length, manufactured in 2026. Equipped with a software license for cutting to specific lengths (extra long and very short) and at variable angles, a software license for displaying profile sections in DXF format, and a label printer. Fedpoz Nghvefx Aikspp

Condition: used, mileage: 95,000 km, power: 220 kW (299.12 HP), fuel type: hybrid, gearing type: automatic, first registration: 08/2022, next inspection (TÜV): 08/2027, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, Special equipment: Audi connect (internet-based services), Business package, Exterior mirrors electrically adjustable, heated and foldable, with automatic dimming and curb assist, Exterior mirrors with curb assist, right, Bluetooth hands-free system with voice recognition (Audi Phone Box), Multi-Media Interface MMI Navigation Plus with MMI Touch, Sun protection roller on rear door windows, Front seat heating, Interior mirror with automatic dimming, Roof rails (aluminum), Parking assist front and rear, visual (APS Plus), Gloss package, Head-up display, Instrument cluster digital (virtual cockpit), Start/Stop button, Steering wheel (sport/leather - 3-spoke, flattened at the bottom) with multifunction plus, Seat cover / upholstery: Fabric Impressum, Special paint Brilliant Black, Sports seats front, Rear window tinted (privacy glazing) Additional equipment: New price: €52,933 net, list price Fpedpfx Aiezwh Uzjkep 8 speakers, Airbag driver/passenger side, Acoustic pedestrian protection, Exterior sound (e-sound), All-wheel drive coupling, Audi connect (emergency call and assistance system), Audi Drive Select, Exterior mirrors in vehicle color, Headliner fabric, e-tron charging system, Door sill trims with aluminum inlay, Electric motor 105 kW (hybrid drive), Windshield acoustic glass, Floor mats velours, Luggage compartment separation (net), Speed limiter, Cup holders, Rear lights LED, Hybrid 220 kW (engine 2.0 L - 195 kW TFSI), Interior: Decorative inserts accent parts black matte, Interior: Decorative inserts micrometallic silver, Isofix mounting for child seat, Body: 4-door, Comfort automatic climate control 3-zone, Head airbag system (Sideguard), Fuel tank: 54 liters, Charging cable for public charging stations (e-tron), Charging cable with industrial plug (16 A / 400 V), Charging cable with Schuko plug, Loading edge protection, Steering column (steering wheel) mech. Height/longitudinal adjustment, Light alloy wheels, Auxiliary electric heater, Model revision, Non-smoker package, Gasoline particulate filter (OPF), Parking brake electro-mechanical, Radio reception digital (DAB), Wheelbase 2819 mm, Tire repair kit, Rear seat back divided/foldable, sliding (40:20:40), Low emissions according to exhaust standard Euro 6d, Side airbags front, Front seats manually adjustable, Standard chassis, Start/Stop system, Bumper design: Basic, Universal interface Bluetooth

Condition: good (used), Year of construction: 2005, Top-of-the-line machine from the renowned manufacturer Thoman Maximum pipe diameter: 50 mm Fully automatic bending process, including 3D bending via NC control Not used extensively Fpodpfxe Ahy Dno Aikjp Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm

Condition: used, Year of construction: 2019, type of cooling: air, Equipment: cabin, Trotec Rayjet 50 – CO₂ Laser System for Engraving & Cutting The Trotec Rayjet 50 is a compact and reliable CO₂ laser ideal for precise engraving and cutting applications. This system is an excellent choice for small businesses, workshops, educational institutions, and professionals seeking to enter laser processing. Currently, 2 units are available from stock. Manufacturer: Trotec Model: Rayjet 50 Year of manufacture: 10/2019 Fjdpfx Aioyhyu Hokopp Technical specifications: Laser source: CO₂ laser Laser power: 30 W Working area: 500 × 300 mm Maximum material height: 145 mm Engraving speed: up to 2.0 m/s Positioning accuracy: 0.01 mm Resolution: up to 1,000 dpi Cooling system: Air-cooled Interface: USB / Ethernet Software: Compatible with standard graphic programs (e.g., CorelDRAW) Dimensions (W × D × H): approx. 870 × 670 × 430 mm Includes extraction system 8401 Atmos Cube All information provided without guarantee. Subject to prior sale.

Condition: used, mileage: 39,500 km, power: 132 kW (179.47 HP), first registration: 02/2021, fuel type: diesel, overall weight: 10,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Iveco Daily 50-180 Garbage Truck with MOL Lift Axle, Euro 6 Internal number for inquiries: 0726705 * Condition: very good * Engine: 134 kW / 180 hp * Displacement: 2,998 cm3 * Permissible total weight: 10,000 kg * ABS * ESP * Differential lock, rear axle * Emission standard: EURO 6 * Electrically adjustable and heated exterior mirrors * Reversing camera * Electric windows * Automatic climate control * Multifunction steering wheel Superstructure: Garbage truck * Manufacturer: MOL CY NV * Type: ECO 20 CB014 * Max. lifting capacity: 800 kg * Max. up to 1,100 L Tires: 1st axle: 215 / 75 R16, 30% 2nd axle: 205 / 65 R16, 45%, air-sprung lift axle 3rd axle: 215 / 75 R16, 40%, air-sprung ----Price: EUR 64,900 + 19% VAT Fpodpfx Aisz Hgi Tjkep For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, and...? Typographical errors, errors and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2023, operating hours: 12,320 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,020 h, spindle nose: SK 40, number of slots in tool magazine: 120, Universal Machining Center + Robot Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: 2023 / 2025 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: Dia. 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 pos. Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4,020 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor with self-cleaning screen - Internal coolant supply (IKZ) 40 bar, comprising: - Paper belt filter - 600 l tank - Cabin roof - Rotary union in spindle - Duplex filter - Air blast through spindle center - Rotating viewing window - Chip flushing gun - Oil and emulsion mist separator - Infrared touch probe, make Heidenhain TS 460 (if present) - Tool measurement - Heidenhain TT160 (if applicable) - 3D quickSET preparation - PH Cell automation interface, comprising: - Interface - 4-channel rotary union - Automatic loading door - Operating mode 4 - Tracy peripheral surface interpolation Fode Agr I Dspfx Aikopp - PH 150 pallet loading/unloading system, comprising: - 10-station pallet magazine - External electronic handwheel (if applicable) Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between businesses (B2B) are always made without warranty.

Condition: used, functionality: fully functional, For sale: Motan METRO HES 50 vacuum conveyor for granules, designed for transporting plastic granules, including feeding injection molding machines. The unit is equipped with a stainless steel tank, an integrated suction unit, and an electronic control panel with a digital display. Technical data according to the nameplate: Manufacturer: motan GmbH Model: METRO HES 50 Fpodpfj Aibgqsx Aikop Power supply: 230 V, single-phase, N and PE Frequency: 50/60 Hz Power consumption: 1.1 kW – 1100 W Current draw: 4.8 A Control voltage: 24 V DC / 230 V AC Protection: 10 A, time-delay Country of manufacture: Germany CE marking Condition: used, visible signs of wear. The set includes the unit with the control panel, cables, and connectors as shown in the pictures. The scope of sale corresponds to the pictures.

Condition: ready for operation (used), In very good condition. Fpodpfx Ais Ah Emleksp

Condition: ready for operation (used), Year of construction: 2005, operating hours: 95,739 h, functionality: fully functional, machine/vehicle number: 15125250324, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 3,000 kg, overall weight: 22,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 38,229 h, coolant supply: 40 bar, spindle motor power: 48 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a DECKEL MAHO DMF 250 linear, manufactured in 2005, from our current production facility. Sale due to modernization of the machine park. The machine is operational, connected to power, and can be inspected and demonstrated in operation after prior arrangement at 84089 Aiglsbach. TECHNICAL DATA Manufacturer / Model: DECKEL MAHO DMF 250 linear Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Machine number: 15125250324 Travel ranges X / Y / Z: 2,500 / 920 / 820 mm Tool holder: SK50 Spindle speed: 10,000 min⁻¹ Tool magazine: 30 positions Internal cooling (IKZ): 40 bar Measuring probe: Heidenhain Max. table load: 3,000 kg Machine weight: approx. 22,000 kg OPERATING HOURS Total operating hours according to the recorded meter reading: approx. 95,739 h Spindle hours according to the recorded meter reading: approx. 38,229 h Motor spindle replaced after approx. 36,670 spindle hours; therefore, approx. 1,559 spindle hours since replacement, based on the meter reading. As the machine is in current operation, the hours may increase until the sale. EXTENSIVE OVERHAUL 2026 Documented net overhaul costs: approx. €61,200. - Motor spindle replaced - Y-axis: Linear guides / guide carriages and ball screw overhauled Fsdpo Aitphofx Aikspp - Z-ball screw including bearing renewed - Geometry newly adjusted and measured - Current Renishaw ball bar measurement available Evidence of the overhaul measures and measurements is available. PRICE AND INSPECTION €99,900 net, negotiable, plus statutory VAT. Location: 84089 Aiglsbach. Inspection and demonstration under power after prior arrangement.

Condition: excellent (used), Year of construction: 2021, operating hours: 27,790 h, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 9,540 h, spindle nose: HSK-A63, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling center universal Manufacturer: DMG MORI Model: DMU 50 3rd Year of manufacture: 2021 Control system: Celos with Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main Spindle: Speed range – main spindle: 20–20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Tool Changer: Tool holder: HSK-A63 Fodpfj Ain Rnjx Aikopp Number of tool positions: 30 pos. Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 27,790 h Spindle hours: approx. 9,540 h Technical Features & Accessories: - Active spindle cooling - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 20 bar, consisting of: - 245-liter tank - Spindle rotary joint - Chip conveyor - Cab roof - Coolant/blow-off air switch - Flushing gun for chip flushing - Infrared probe, Renishaw PP60 (if available) - Laser tool measurement - Preparation for 3D quickSET - Operating mode 4 - Electronic handwheel - PROFIBUS automation interface, automatic loading via operator door, 2-channel safety circuits - Prepared for robot-side control of the clamping system, including 4-way rotary feedthrough - Machine-side automation software interface for connection to a master computer (Siemens CMI) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information.