Used Abus V for sale (102)

Condition: excellent (used), Year of construction: 2000, overall weight: 1,000 kg, total length: 4,250 mm, Overhead Crane Kelhex Dkqlscdwwsdl ABUS - VS 1t x 4250 MACH-ID 9308 Make: ABUS Type: VS 1t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, overall weight: 500 kg, total length: 4,250 mm, Overhead Crane ABUS - VS 0,5t x 4250 MACH-ID 9309 Make: ABUS Kolex Di Txjhcdwwjdl Type: VS 0,5t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type VS, lifting capacity 2500 kg -Accessories: A wireless remote control (transmitter/receiver) can be supplied for an additional charge. -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes Kjlhjy I Aknscdwwedl -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg

Year of construction: 2017, condition: good (used), 2022 Abus / Framatech ZHB / LNED 230 S70 approx. 2 x 22m or 1 x 44m Self-supporting steel crane runway structure with 2 vacuum lifters, already dismantled. Span: 2 x approx. 700cm, motorized. Includes Framatech pneumatic vacuum lifter, type: LNED 230 S70, 2 x 2017. Total height: 4400mm. Kdjley I U Swshcdwwsl

Condition: ready for operation (used), Year of construction: 2022, A single-girder overhead crane is offered. Span/lifting height: approx. 12500mm/6000mm, load capacity: 3200kg, hoist unit: electric wire rope hoist, travel speeds: 2-stage (fine lift/main lift), crane travel: frequency-controlled, control: floor control via pendant pushbutton station. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 13000mm/1100mm/1350mm. Inspection possible by arrangement. Kjlhcdwjy Tn Ipowsdl

Condition: used, functionality: fully functional, Year of construction: 2008, overall weight: 37,700 kg, total height: 2,927 mm, total length: 29,100 mm, total width: 6,344 mm, load capacity: 40,000 kg, power: 32 kW (43.51 HP), main lifting speed: 8,000 mm/min, fine lifting speed: 1,300 mm/s, working height: 15,000 mm, clear span: 28,800 mm, Equipment: documentation/manual, Lemmens / Abus double girder overhead crane with Abus GM7000 hoist, year of manufacture 2008, lifting capacity 40,000 KG, available lifting height 15 meters, equipped with Abus joystick control and ramshorn hook. Well maintained, fully documented, will be removed from service in working condition. Speeds: - Crane travel: 6.0 - 60.0 m/min (frequency controlled) Kjlhcdex A A T Aewwjdl - Trolley travel: 7.5 / 30 m/min - Hoisting/lowering: 1.3 - 8.0 m/min (frequency controlled) Required height from crane track: 2,142 mm The crane will be dismantled for road transport. Transport must be arranged by the buyer (2x trucks for 29-meter length, 1x truck for hoist and end carriages). A total of 8 identical cranes will become available, the first cranes will be dismantled in week 51. Keywords: overhead crane, double girder crane, cranes, workshop crane, warehouse crane, hoist, bridge crane, Lemmens, Abus, Demag, Kone, hall crane.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, total length: 6,000 mm, total width: 2,430 mm, load capacity: 4,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane Kslsy A Huajhcdwwsdl – Type: single-girder – Capacity: 4,000 kg – Lifting height: 6 m – Year of manufacture: 2021 – Hoist type: wire rope hoist – FEM/ISO hoist: 3m / M6 Dimensions – Span: 6,000 mm (center-to-center) – Installation height: 350 mm – Width of wheel set incl. buffers: 2,430 mm – Wheelbase: 1,900 mm – Weight: 1,310 kg – Suitable for crane rail: 50×30 mm Speeds – Lifting: 0.39 to 4 m/min (stepless) – Trolley travel: 1 to 20 m/min (stepless) – Crane travel: 1 to 20 m/min (stepless) Features – Control: radio control – Crane manual included: yes – Condition: like new, used for only 2 years – Dismantled: early May 2026 – 8 pieces available – Steel structure and conductor systems also available (3x 35 m or 4x 12.5 m)

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Height: approx. 3.8 m, under jib: approx. 3.4 m Outreach: approx. 4 m, hook height: approx. 3 m Base plate approx. 60x60 cm Total weight approx. 700 kg Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Kolhcdey Hgnnewwsdl Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: used, Year of construction: 1978, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Kdelhcdwer Igtkewjl Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: ready for operation (used), Year of construction: 2014, Offered is a column-mounted jib crane: Load capacity: 1000kg, Outreach: 3500mm, Overall height: 4400mm, Column diameter: 355mm, Crane classification: H2 / B3, Hoist unit: electric chain hoist, Slewing gear: electric 0.21rpm / 0.84rpm, System regularly inspected, Inspection by appointment Kdelhcjy Dgqwodwwjl

Condition: used, Wall-mounted slewing jib crane with hoist, slewing drive, and trolley ABUS Wall-mounted Slewing Jib Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Slewing range: 180° Outreach, jib tip to wall: approx. 6640 mm Minimum outreach (crane hook to wall): approx. 1450 mm Kdolhcdwowzmi Iowsl Maximum outreach (crane hook to wall): approx. 6250 mm Trolley travel distance: approx. 4800 mm Hook distance from jib tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Jib length without wall bracket (slewing bearing): 6530 mm Total height with wall bracket (slewing bearing) and mounted components: 2590 mm (overall height) - Jib profile: double-T steel beam (height 600 x width 220 mm) - Jib electrically slewing via geared motor (2 speeds) - Electric slewing drive with limit and preliminary limit switches - Slewing angle end positions with electric end and preliminary limit switches - Painted in ABUS Yellow (original paint) - 2 wall flanges 340 x 280 mm, each with 6 Ø 27 mm holes - Mounting surface for wall flanges (W x H): 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Rated load: 3200 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Creeping (fine) lifting speed: 0.8 meters/min. Trolley travel speed: approx. 4.5 and 19 m/min. - Control via radio remote and emergency control via pendant on cable - Trolley travel with electric drive, with limit and preliminary limit switches - Approx. 20 operating hours - Last inspection: April 2024 at 19 operating hours Wire rope hoist weight: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight jib with wire rope hoist: 1500 kg Very good condition

Year of construction: 1994, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14/804766, Overheadcrane ± 13.680 mm x 1.000 kg Kslhcdov Ipyqjwwsdl

Condition: used, Year of construction: 2000, Technical details: lifting capacity: 1,0 t Kolhju Nvmdocdwwjdl Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBMA-GI, 1x ABUS wire rope hoist Crane hoist 6300KG 6.3to GM2063H6-201.41.063 E160 4 pieces available Payload 6300KG / 6.3t payload / lifting load - 4 strands with 2 lifting speeds, lifting height approx. 6m, track width of the lifting gear approx. 30cm (+- a few cm adjustable) with control bottle and connection plug for the power supply Kdslevbck Ashcdwwol Weight complete approx. 400 kg, connection to 400V 50Hz Very good condition, see pictures Item location is 75053 Gondelsheim See pictures

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: KA27 - 14/796736, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane Payload / lifting capacity 1.6t – 1600kg Span 9550mm, external dimension approx. 9700mm Year of manufacture 1998 with pendant control Lifting height 6m Hoist GM816 L06 Overall height top of crane to hook approx. 710mm (320mm beam + 390mm hoist) End carriage length without buffers approx. 220cm Optionally, two running rails 2x 40m HEA240 are available. Crane is disassembled and immediately available Very good condition, inspection logbook available Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Kslhswzrtxscdwwjdl Shipping by freight forwarder possible, please inquire with postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA31 - 110-006258, ABUS Kranhimmel bridge crane, crane runway, indoor crane Capacity / lifting load: 1.6t - 1600kg Track gauge: 9550mm, external dimension approx. 9700mm Year 2008 with floor control Lifting height: 6m Hoisting unit: GM800.1600 Installation height (top edge of crane to hook): approx. 660mm (290mm girder + 370mm hoist) End carriage length without buffers: approx. 220cm Optionally, 2 x 40m HEA240 crane runways are also available. Kdslhcdjwv I Riswwol The crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted and wall-mounted slewing cranes are also available, as well as Demag KBK and Abus HB systems, Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible—please inquire with postcode Collection preferred

Year of construction: 1979, condition: excellent (used), machine/vehicle number: Kran, 25 Abus pillar jib cranes 250 500 1000KG payload available, length 4m Please inquire with exact dimensions such as overhangs, overall height, payload etc It is offered: 1x ABUS VS pillar jib crane jib crane chain hoist crane slewing crane 500KG 0.5t 6m PB7 (Picture 1-6) Technical specifications: 1 ABUS VS pillar jib crane 500 KG payload / lifting load Payload with full reach 500 KG / 0.5to Height: approx 3.9m Outreach: approx. 4 m, hook height: approx. 3 m dowel plate 140x140cm (approx 950KG) Weight completely approx. 1750 kg with Demag chain hoist Kdolhofi U E Decdwwjl Connection to 400V 360 ° swivel range The item location is 75053 Gondelsheim Only the offered crane system shown in the pictures is sold See pictures Shipping by carrier or pickup Feedback geben Verlauf Gespeichert Community

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: 152-013560, total height: 4,500 mm, total length: 3,690 mm, load capacity: 5,000 kg, power: 4.63 kW (6.30 HP), throat depth: 3,000 mm, Equipment: documentation/manual, Outreach/span 3000 mm Kdelhcoyll Ayjdwwjl Crane is currently dismantled and stored in a warehouse Suitable for indoor operation Crane type: VS 558 Column diameter: 558 mm Floor control via push-button pendant

Condition: used, volt / V Kdslhcdey S Dmrewwel ampere / A weight 20 kg

Condition: excellent (used), overall weight: 20,000 kg, Overhead Crane ABUS - ZLK MACH-ID 9495 Make: ABUS Kelsy D Slgohcdwwodl Type: ZLK Year: 2002 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, Overhead Crane ABUS - ELK MACH-ID 9496 Kjljy Ec Etjhcdwwjdl Make: ABUS Type: ELK Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Kdolhcdsxmf R Sowwel Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, power capacity / kW volt / V Kdslsy Spwishcdwwjl ampere / A

Condition: good (used), functionality: fully functional, Year of construction: 2023, total height: 3,500 mm, total length: 15,000 mm, total width: 6,500 mm, load capacity: 100 kg, Used ABUS and Yale Single-Girder Overhead Crane System EHB – HB110S Profile – incl. GM2 100 Electric Trolley For sale: a used ABUS single-girder overhead crane system (EHB) equipped with HB110S crane profiles. This system is suitable for light to medium-duty internal lifting and material handling applications in workshops, production facilities, and warehouses. Technical specifications: Manufacturer: ABUS Kransysteme/Yale Year of manufacture: 2023 and 2021 Type: EHB single-girder overhead crane Profile type: HB110S (500kg capacity) Fitted with power supply conductors Available track lengths: - 12,250 mm - 14,000 mm - 12,250 mm - 14,750 mm - 15,750 mm Crossbeams / Swing Beams: Length: 6,500 mm Quantity: 5 pcs (each length has 1 swing beam and chain hoist) Hoisting Equipment: - ABUS electric trolley - Type: GM2 100 The system is suitable for extension or integration into an existing EHB suspension crane installation. Ideal for efficient internal transport of materials and components within a production area. Scope of delivery: - As shown / dismantled from operation - Including crane documentation, drawings, and photos For more information, additional photos, or a quotation, please feel free to contact us. Price per unit: from €3,250.00 3 x Abus, 2 x Yale. Kdelsyyq Ilshcdwwsl Also available as a lot: 5 units.

Condition: used, Electric chain hoist, crane, ABUS type GM 1 / 250.6-111 Manufacturer's serial number: D775256-0007, year of manufacture: 1996 Load capacity: 250 kg Hook travel: 2.4 meters Lifting speed: 6 m/min Fine lifting speed: 1.5 m/min Distance from suspension point to load hook: 300 mm Control pendant cable length: approx. 2 meters 1 load chain = 250 kg Motor power: 0.07 / 0.27 kW Power supply: 400 volts, 50 Hz Kelhcdwey Tptgjwsdl - Emergency stop button - Suspension eye on the top of the crane - Without trolley Weight: 26.5 kg Good condition