Used Chiron Fz 22 L for sale (88)

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Tool change time 2.0 s Drive power max. 18.5 kW Speed range up to 10,500 1/min EQUIPMENT/ACCESSORIES  Automatic tool changer ATC 40  Long part machining/pendulum machining (center divider missing)  Splash guard with sliding doors, electrically secured, including machine light  Coolant system with high-pressure pump and paper band filter Container capacity 500 l, N-pump 200 l/min at 1.5 bar HD pump 50 l/min at 20 bar, including dual-stage filter Gsdpjxwwc Uofx Ahmjbr  Internal coolant supply through the spindle (IKZ)  Chip conveyor with discharge height 1050 mm  Flushing gun  1 NC rotary table with chuck  1 hydraulic counter bearing  1 clamping bridge  Electronic handwheel  Installation elements  Documentation

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Gbedoquhbgspfx Ahmsr Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Gjdpfewaa Insx Ahmebr

Condition: ready for operation (used), Year of construction: 1997, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: 179-49, travel distance X-axis: 2,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc OMC, total height: 3,040 mm, total length: 3,920 mm, total width: 2,400 mm, table width: 550 mm, table length: 2,700 mm, overall weight: 7,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,500 rpm, coolant supply: 30 bar, number of slots in tool magazine: 40, tool length: 250 mm, tool diameter: 75 mm, input voltage: 400 V, FZ 22 long-bed, fully functional and still in daily operation. The machine is being replaced and can be inspected at any time during regular opening hours. Gbjdpfey R D Duex Ahmsr

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Gjdpoyhnfcefx Ahmebr Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

Condition: ready for operation (used), Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible. Gjdpeycwrbsfx Ahmebr

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 tool holder - The machine is currently idle. Gedpjywpa Ijfx Ahmsbr - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. The machine can be inspected under power at any time.

Condition: used, Year of construction: 2017, operating hours: 18,074 h, machine/vehicle number: 302-58, Travel ranges (X/Y/Z): 550/300/425 mm, spindle speed max.: 10,500 rpm, tool holder SK 40, machine weight: 6,500 kg, control system SIEMENS Sinumerik 840 D, chip conveyor KNOLL 600 K-1/320, belt filter system BÜRENER MASCHINENFABRIK KA M. TPF 150/510S, year of manufacture: 2017, rotary table. Drilling emulsion/lubricants must be extracted and disposed of by the customer in a professional manner. Gbjdpfxszqy Uts Ahmor

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE Gedpfx Aoyq Nyyehmjbr x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Godpox Iiw Isfx Ahmsbr Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: used, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 270 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 450 mm, controller manufacturer: Siemens, controller model: 840DSL, spindle speed (max.): 36,000 rpm, Spindle Speed: 36,000 rpm Power: 2.3 kW Tool interface: HSK-E Tool changer: 24 stations Working area Travel in X: 270 mm Travel in Y: 310 mm Travel in Z: 450 mm Rapid traverse (X/Y/Z): 75 m/min C-axis Type: NC rotary table Diameter of rotary table: 245 mm Robot Type: Variocell UNO Equipment Gbjdpfx Aezgckiohmor 5-axis milling package Lasercontrol 40NT Measuring probe Automatic loading and unloading system Variocell UNO

Condition: excellent (used), Year of construction: 2020, Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles. Gedpfx Aeyt I Uhjhmobr Built and first use in 2020. The spindle was replaced in June 2022 and currently has 4500 operation hours. Machine is in very good condition and it can be inspected under power upon appointment. Availability: on request Including: Chip conveyor (scraper type) Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm Coolant system TPF 350 / FKA 900 Coolant through the spindle Fixed 3D probe Type TS 27 R – RENISHAW Renishaw RLP40Q probe system Cnc control SIEMENS 840D X-axis 730 mm Y-axis 400 mm Z-axis 425 mm Maximum spindle speed 15,000 rpm Maximum torque 140 Nm Drilling capacity Ø 42 mm Thread tapping M30 Tool magazine capacity 20 tools Tool taper DIN 69893 HSK A63 Maximum tool diameter 65 mm Milling capacity 500 cm³/min in E355 steel Full technincal specifications in the attached document. Optional: ARMIN automatic robot cell (2024)

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN Gbjdpfen D D Nhex Ahmjr CN SIEMENS SINUMERIK 258-38. Number of hours on the counter: 85 642 hours total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min tool attachment SA40 2 UNITS AVAILABLE

Condition: new, Chiron 1122242 / 562 006 HSK-A63 clamping gripper SN: 9F08 with 5721028100 / 95281 tool arm 1088539/00 CW49/15, unused, 100% functional, scope of delivery as per photos. Gbsdezpcv Repfx Ahmer

Condition: used, Year of construction: 1997, functionality: not functional, The following parts from a Chiron FZ 12 SM, year 1997, are for sale: Godexdhp Ejpfx Ahmebr 9 pcs. tool arms 1 pc. spindle 1 pc. spindle motor

Condition: new, Chiron 1122242 / 562 006 HSK-A63 coupling gripper SN: H308, unused, 100% functional, scope of delivery as per photos. Godpfoy Np Ipjx Ahmjbr

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Gjdoxd T Rzopfx Ahmebr Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 76,130 h, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, overall weight: 5,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, number of axes: 5, This 5-axis CHIRON FZ 15FX was manufactured in 2002. It features a spindle speed of 12,000 rpm and a 48-station tool magazine for efficient operation. The machine is equipped with a Peiseler rotary table and an internal through-spindle cooling system, ensuring optimal performance. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 15FX vertical machining centre we have for sale. Contact us for further details. - Kinematics: 5-axis (3+2 axes configuration)- A axis range is between A -100 -> +90- Table System: Peiseler rotary table equipped with LANG clamping system- Cooling System: Internal through-spindle cooling system- Chip Management: Chip conveyor- Workpiece Measuring: Renishaw probe- Manual Operation: Operator's handwheel- Working Voltage: 400 V- Control Voltage: 230/24 V- Frequency: 50/60 Hz- Current Type: 3/N/PE ~- Rated Current: 67 A- Rating/Power: 47 kVA- Fuse Protection: 80 A Godpfx Aozgf Ttshmobr Technical Specification Through-spindle Coolant Yes

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Gbsdpfezqbdisx Ahmer Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450 x 270 x 310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+115 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 20 A ROTARY AXIS Gbedpeuhbtqefx Ahmer - Max. bar diameter : 32 [mm] - Indexing precision : 0,001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 17 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.500 x 2.600 [mm] - Machine height : 2.300 [mm] - Machine weight : 5.100 [kg] MACHINE HOURS - Number of working hours : 20.749 [h] EQUIPMENT - CNC : Fanuc 31i-A5 - Interface : USB, PCMCIA, RJ45 - Fire extinguisher * : KRAFT&BAUER FB703 * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Coolant tank - Spindle cooling unit - Oil mist extractor : HIFI FILTER - Tool probe : Renishaw TS27R - Workpiece probe : Renishaw OMP40 - Unit for 6th face machining - Collet chuck : ORTLIEB KSF 30-50 - Tool recognition through RFID scanning : BALLUFF BIS C-650 - Tool-holders : 30

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] Gsdpfouhbr Tsx Ahmobr - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: used, Year of construction: 2015, CNC machining center Gbodezfppcepfx Ahmsr Manufacturer: Chiron Type: FZ 12 W Magnum Year of manufacture: 2015 CNC control: Siemens 840D solution line Travel distances: X/Y/Z = 550 x 400 x 360 mm Spindle: 15,000 rpm Tool interface: HSK63 Internal coolant supply Rotary table Integrated workpiece changer 32-position tool changer Glass scales Chip conveyor Laser control for breakage monitoring 3826

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° Gedeypb Tpopfx Ahmobr • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type • Operating Materials: Specific operating fluids/materials included

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: Fanuc, spindle nose: HSK 32, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used CHIRON FZ 08 S vertical machining center, manufactured in the year 2000. The machine was used for single-shift operation. As it is our only Fanuc machine, we are now selling it. Gbedpjzqfynjfx Ahmor The machine has a memory expansion and was refurbished by Chiron in 2013. Unfortunately, no documents about this are available anymore after more than 10 years. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 94,204 h, travel distance X-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, overall weight: 8,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, number of axes: 5, This 5-axis CHIRON FZ 15K S was manufactured in 2001. It features a spindle speed of 12,000 rpm and a tool magazine with 48 positions, providing efficient machining capabilities. The machine is equipped with a Peiseler swivel rotary table and an internal through-spindle cooling system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 15K S vertical machining centre we have for sale. Contact us for further details. - Number of Axes: 5-axis (3+2 configuration)- Axis Table: Peiseler swivel rotary table equipped with HSK 100 clamping / LANG clamping system- Cooling: Internal through-spindle cooling system (IKZ)- Chip Management: Chip conveyor system- Workpiece Measuring: Renishaw probe- Working Voltage: 400 V- Control Voltage: 230 / 24 V- Power Rating: 47 kVA- Rated Current: 67 A- Fuse: 80 A Gbedpjzggb Eefx Ahmer Technical Specification Taper Size HSK 100 Through-spindle Coolant Yes