Used Manual Lathe for sale (19,324)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min Bwsdpfx Agjymli Aezji c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bedpfx Agjymliijzewi Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Bwsdpfjymlf Dex Agzji Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: ready for operation (used), Centre height: 700 mm Bjdpsyn Ed Nofx Agzjwi Centre distance: 1800 mm Max. swing diameter over bed/in gap: 1300/1740 mm Turning diameter over cross slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Cross slide adjustment: 350 mm Electrical connection: 380 V, 6.6 kW Weight approx.: 5.5 t Required space: 3800 x 1600 x 1700 mm

Year of construction: 2022, condition: excellent (used), Machine Specifications​ Imperial Metric CNC Control Yes Control Type OSP-P300LA-e # of Axes 2 Swing 20.47" Turning Diameter 16.14" Center Distance 43.31" Chuck Size Bwodpfx Aoymq Uksgzoi 10" Bar Capacity 3.15" X-Axis Travel 9.05" Z-Axis Travel 45.04" Spindle Nose A2-8 Spindle Speed 3,000 rpm Main Motor 20 HP Turret Capacity 12 Tailstock (Yes/No) Yes

Year of construction: 2006, condition: excellent (used), Turning capacity: Bwsdpfsymqx Nex Agzji Max. turning diameter: 190 mm – 200 mm Max. turning length: 620 mm – 780 mm Bar capacity: 51 mm / 65 mm Spindles (main & sub-spindle): Spindle speed: 4,500 – 6,000 rpm Drive power (main spindle): 15/11 kW Spindle nose: A2-5 / A2-6 Turret & axes: Number of turrets: 2 (upper turret with B-axis, lower turret) B-axis swivel range: (or approx. total) Y-axis (stroke): (total) Number of axes: total 9 Dimensions & Weight: Footprint: approx. (width x depth) Machine weight: approx. 12,500 kg – 13,500 kg

Year of construction: 2011, condition: excellent (used), 2 units Technical Data (Overview): Bar capacity: 42 mm Max. turning diameter: approx. 190 mm Max. turning length: approx. 500 mm Spindle speed (main & sub-spindle): 6,000 rpm Spindle motor power: 11/7.5 kW Turret: 2x 12 stations (often driven) Y-axis: Upper, Bjdpsymqxiefx Agzowi mm Control: Fanuc 31i/T (or NT SmartX) Machine weight: approx. 5,650 kg

Condition: excellent (used), mileage: 706,984 km, power: 309 kW (420.12 HP), first registration: 05/2004, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 2004, Equipment: air conditioning, retarder, Front axle: Steering; Suspension: Leaf suspension Bedpoynwq Ijfx Agzewi Rear axle: Twin tyres; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 7,036 kg Payload: 11,964 kg Gross vehicle weight (GVW): 19,000 kg Technical condition: Very good Visual condition: Very good For further information, please contact Thierry Leemans.

Condition: excellent (used), L & Z Lathe Bjdsyq Nvnepfx Agzowi NARDINI Type MS 175 E Center height: 175 mm Swing over bed: 350 mm Distance between centers: 800 mm Spindle bore: 46 mm Spindle speeds: 25 - 2000 rpm Weight: 1250 kg

Condition: good (used), Lathe Wagner Turning length: 1500 mm Turning diameter: 530 mm Bodpfx Agjyq Nvhozowi

Condition: used, Year of construction: 2002, turning diameter 190 mm turning length 120 mm control MSG-501 max. swing diameter 250 mm Distance between centers 750 mm bar passage 40 mm x-axis 135 mm Bwodpfeypwa Ssx Agzei z-axis 450 mm y-axis ±40 mm spindle tunring speed 6.000 U/min number of tool places 16 Pos. Number of working hours ca. 1.230 h The machine is from its first owner and has low operating hours. It is very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Parts catcher and conveyor belt - High-pressure cooling - 16-station upper turret with Y-axis - Bar feeder interface - Hainbuch collets - Three-jaw chuck - Fixed and driven tool holders Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: excellent (used), Weiler Optimum Including tooling Bwjdpfxoyp N Eae Agzoi Excellent condition!

Condition: excellent (used), Year of construction: 2017, Haas ST15 Year of manufacture: 2017 Equipped with barfeeder Bwodpfoyp Ny Dox Agzji Videos available

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, Heavy Duty Elevating Crossrail Ram Type CNC Vertical Boring and Turning Machine with Hardened & Ground Box Guideways CAPACITY Maximum Turning Diameter - Ø 1,600mm Maximum Turning Height - 1,400mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,250 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220mm² TRAVEL AND FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,060mm Z-Axis Travel (Ram Vertical) - 900mm Vertical Travel of Cross Rail - 700mm Maximum X / Z-Axis Cutting Feedrate - 7,500mm / Min X / Z-Axis Rapid Feedrate - 7,500mm / Min Cross Rail Rapid Traverse - 300mm / Min ATC Type of Tool Holder - MAS BT 50 Bodpfjuu Rybsx Agzowi 12 Tool Magazine Capacity Maximum Tool weight - 50kg MOTOR Table Motor (Cont. / 30 min) - AC 37.0 / 45.0 kW X / Z-Axis Servo Motor AC - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50Hz / 3PH Power Capacity - 80 kVA DIMENSIONS AND WEIGHT Height - 5,290 mm External Width (With Chip Conveyor) - 6,760mm External Depth - 4,565m Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES Fanuc 32i-A Control System Table, Servo Drives And Motors 4 Jaw Independent Chuck Automatic Tool Change System Lubrication Oil Cooler Hydraulic Power Unit Automatic Lubrication System For Guides Coolant System And Wash Gun Foundation Bolts And Nuts Tool Box Through Tool Coolant Operator And Programmer Manuals Splash Guard And Safety Guard Rail X-Axis Slideway Protect Steel Cover Work Light Patrol Lamp (Red, Yellow And Green) NC Power Off Chip Pan Levelling Blocks Electrical And Mechanical Manuals FANUC 32I CNC

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, Heavy Duty Elevating Crossrail Ram Type CNC Vertical Boring and Turning Machine with Hardened & Ground Box Guideways CAPACITY Maximum Turning Diameter - Ø 1,600mm Maximum Turning Height - 1,400mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,250 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220mm² TRAVEL AND FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,060mm Z-Axis Travel (Ram Vertical) - 900mm Vertical Travel of Cross Rail - 700mm Maximum X / Z-Axis Cutting Feedrate - 7,500mm / Min X / Z-Axis Rapid Feedrate - 7,500mm / Min Cross Rail Rapid Traverse - 300mm / Min ATC Type of Tool Holder - MAS BT 50 12 Tool Magazine Capacity Maximum Tool weight - 50kg MOTOR Table Motor (Cont. / 30 min) - AC 37.0 / 45.0 kW X / Z-Axis Servo Motor AC - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50Hz / 3PH Power Capacity - 80 kVA DIMENSIONS AND WEIGHT Height - 5,290 mm External Width (With Chip Conveyor) - 6,760mm External Depth - 4,565m Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES Fanuc 32i-A Control System Table, Servo Drives And Motors 4 Jaw Independent Chuck Automatic Tool Change System Lubrication Oil Cooler Bwjdpfxsguq Txj Agzji Hydraulic Power Unit Automatic Lubrication System For Guides Coolant System And Wash Gun Foundation Bolts And Nuts Tool Box Through Tool Coolant Operator And Programmer Manuals Splash Guard And Safety Guard Rail X-Axis Slideway Protect Steel Cover Work Light Patrol Lamp (Red, Yellow And Green) NC Power Off Chip Pan Levelling Blocks Electrical And Mechanical Manuals FANUC 32I CNC

Condition: excellent (used), machine/vehicle number: WMAH17ZZZ1M310297, mileage: 404,140 km, power: 302 kW (410.61 HP), first registration: 05/2001, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 9,000 mm, total width: 2,500 mm, total height: 3,500 mm, Year of construction: 2001, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, = Additional options and accessories = - 1 fuel tank Bodpfsyptivex Agzswi - 1 sleeping place - Airbag - Armrest - Front suspension: Leaf - High Beams - Hydraulics - Lift Axle - Open roof - PTO - Sleeper cabin - Sper = Remarks = Structure Tank capacity: 17000 liters = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Reduction: single reduction; Suspension: air suspension Rear axle 2: Steering; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 1995, turning diameter 560 mm turning length 1250 mm control Sinumerik 805 turning dia. over face-slide 340 mm spindle bore 63 mm spindle turning speed range 3 - 2500 U/min feeds - longitudinal 0,001 - 3 mm/U Bjdpfx Agsymp Suszjwi feeds - cross 0,001 - 3 mm/U rapid traverse longitudinal 7 m/min rapid traverse cross 3,5 m/min thread - mm pitch 0,5 - 140 mm thread - inch 1/4 - 56 Gang/ inch. thread - module mm main drive 19 kW clamping length max. 2250 mm total power requirement 24 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4,0 x 1,65 x 1,75 m controll Siemens 805, for cone turning, contour turning and threat cutting. Machine has MULTIFIX toolholder system size "C", steady and 3 jaw chuck.

Condition: used, Year of construction: 1976, turning diameter over bed 0300 mm turning diameter over slide rest 180 mm turning length 750 mm turning speed range 44 - 1300 U/min spindle bore 41,0 mm quill stroke 105 mm morse taper 3 MK bed width 245 mm Bwedpfjxu Nrcjx Agzsi total power requirement 2,2 kW weight of the machine ca. 1250 t dimensions of the machine ca. 2000 x 1200 x 1500 m We supply the machine with a 3 jaw chuck, a 4 jaw chuck, a face plate, a collet chuck with collets, a quick tool changer with holders and change gears for threat cutting.

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t Bjdpfx Agexp Rzbozjwi dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: good (used), mileage: 750,162 km, power: 309 kW (420.12 HP), first registration: 01/1999, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Year of construction: 1999, Equipment: central locking, electric window regulation, spoiler, = Additional options and accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Roof spoiler - Windshield - Cabin - Automatic preheater Bedpsyn Nvcofx Agzewi = Notes = Coming soon; Fh 420 6x2 750,000 km Cable system = Further information = Front axle: Steered Rear axle 1: Double-mounted Technical condition: Good Visual condition: Good Stock status: Expected soon Please contact VAEX The Truck Traders for further information.

Condition: good (used), machine/vehicle number: XLRTE47MS0E911341, mileage: 858,678 km, power: 302 kW (410.61 HP), first registration: 08/2011, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2011, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, power mirror, spoiler, = Additional options and accessories = - 2 sleeping places - Airbag - Armrest - Disc brakes - Front suspension: Leaf - High sleeping cabin - Open roof - Rear suspension: Air - Sleeper cabin - Sper - Spoilers = More information = Tyre profile: 50% Brakes: disc brakes Bedpfx Asypm Hnogzswi Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: good Visual appearance: good

Condition: excellent (used), mileage: 838,444 km, power: 309 kW (420.12 HP), first registration: 04/2001, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, emission class: euro2, suspension: other, total length: 6,000 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2001, Equipment: ABS, air conditioning, cruise control, electric window regulation, power assisted steering, retarder, = Additional options and accessories = - High beam - Radio/CD player - Sleeper cab - Sun visor - Pre-heating automatic system = Remarks = TRANSPORT TO ANTWERP 390 EURO = Further information = Tyre size: 315/80 R22.5 Front axle: Steered; Suspension: Parabolic suspension Rear axle: Twin tyres; Suspension: Air suspension Unladen weight: 7,900 kg Technical condition: Very good Visual condition: Very good Bwjdjyn Shhjpfx Agzoi Reference number: 44

Condition: good (used), Year of construction: 2017, turning height: 1,600 mm, workpiece weight (max.): 16,000 kg, Max. turning diameter: 3,200 mm Table diameter: 2,800 mm Max. turning height: 1,600 mm Max. workpiece weight: 16,000 kg Table speed range: 70 rpm Number of table speed ranges: constant Vertical travel in Z-axis (ram stroke): 1,100 mm Horizontal slide travel in X-axis: 1,720 mm Working feed range: 2 - 2,000 mm/min Rapid traverse in X/Z axis: 7 m/min Cross rail traverse: 360 mm/min Main motor power: 55 kW Bjdoyrflzjpfx Agzjwi Installed power: 69 kW Positioning accuracy: 0.02 / 1,000 mm Dimensions: 5,500 x 6,540 x 4,900 mm Weight: 43,000 kg

Condition: excellent (used), mileage: 165,944 km, first registration: 01/1988, fuel type: diesel, tire size: 205/75 R16C, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 5, suspension: steel, number of seats: 2, total length: 5,500 mm, total width: 2,150 mm, total height: 2,850 mm, Year of construction: 1988, TRANSPORT TO ANTWERP 390 EURO = Further information = Bwedpfx Agsw Iqycezei Tyre size: 205/75 R16C Suspension: leaf spring Front axle: steerable Unladen weight: 3,900 kg Technical condition: very good Visual condition: very good Reference number: 46

Condition: good (used), Year of construction: 2021, workpiece weight (max.): 10,000 kg, Max. turning diameter: 2,500 mm Max. workpiece weight: 10,000 kg Faceplate speed range: 1 - 100 rpm Cross-slide travel X / Z: - Left: 1,400 / 1,180 mm feed - Right: 1,400 / 1,180 mm feed Max. machining diameter: 2,500 mm Max. workpiece height: 1,600 mm Faceplate speed: 1 - 150 rpm Maximum workpiece weight: - 1 - 25 rpm: 10,000 kg - 25 – 100 rpm: 5,000 kg Number of vertical slides: 2 (right/left) Vertical slide travel: - Horizontal: 1,395 mm - Vertical: 1,165 mm Infinitely variable feed range: 1 – 5,000 mm/min Rapid traverse speed of slides: 5,000 mm/min Bwsdpfoyrd Stox Agzoi Max. torque for DC feed motors: 37 Nm Max. swivel angle of the vertical slide: 30° Max. vertical travel of the slide beam: 1,320 mm Main drive motor power: 75 kW Machine weight approx.: 35,500 kg Power supply: 3 x 380 V; 50 Hz