Used Manual Lathe for sale (19,357)

Condition: good (used), Max. turning diameter: approx. 1100 mm Faceplate turning diameter: 800 mm Maximum turning height over faceplate: 900 mm Max. table load: 2000 kg Maximum total cutting force at 700 mm diameter: 3400 kg 12 faceplate speeds: 12 - 200 rpm Number of feeds, horizontal and vertical: 8 Feed size, horizontal and vertical: 0.069 – 2.6 mm/rev Rapid traverse of slides: 2500 mm/min Drive power: 15 kW Dimensions (L x W x H): 2300 x 2100 x 2900 mm Weight: approx. 7,500 kg Accessories / Special features: Bwedpfsxamgzjx Agzsi • 2-axis digital readout (new in 2024) • 5-position star turret • Emergency stop switch • Chip guard for faceplate Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 1975, turning diameter over cross slide: 900 mm, turning diameter: 1,260 mm, center height: 630 mm, center width: 5,000 mm, overall weight: 10,000 kg, capacity 5000X1260MM 4-jaw chuck 1200MM Bwsdpfx Agoyrd Arezei steady rest rapid traverse

Condition: ready for operation (used), Year of construction: 1990, spindle bore: 37 mm, turning diameter: 360 mm, turning length: 750 mm, overall weight: 1,600 kg, 2-axis Acu-Rite DRO; spindle bore 37 mm; variable spindle speed up to 3000 rpm; working capacity 750x360 mm; Multifix tool turret Bsdpfsydydcjx Agzjwi

Condition: new, Year of construction: 2025, 0400 mm 1250 mm 200 mm Bwjdewp Tckepfx Agzoi 55 mm 315 mm 2700 U/min D1-6 DIN 55029 73 mm 140 mm

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m Bsdpfx Agsydqpiezswi taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW Bwodpfex Hpyysx Agzji weight of the machine ca. 1,7 t Machine is without live tooling and without tailstock.

Condition: used, Year of construction: 1990, turning diameter over bed 0520 mm turning diameter over slide rest 300 mm turning length 1625 mm spindle bore 68 mm spindle turning speed range 23- 1250 U/min total power requirement 7,5 kW weight of the machine ca. 3 t dimensions of the machine ca. 2,8 x 1 x 1,4 m With Multifix holder, chuck und chuck safety cover. Bjdjyn R Exspfx Agzswi

Condition: excellent (used), mileage: 819,500 km, power: 294 kW (399.73 HP), first registration: 10/1999, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 430 l, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1999, Equipment: ABS, differential lock, parking heater, power mirror, retarder, seat heater, = Additional Options and Equipment = - 430-liter diesel tank - Aluminum fuel tank - Heated mirrors - Driver comfort seats - Differential lock - Speed limiter - Intarder - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater - Power take-off (PTO) - Power take-off (PTO) - ZF intarder - ZF16 manual transmission Bwjdeyrhh Eopfx Agzji = Notes = LIKE NEW CONDITION M.A.N. 19.403FLT (F2000) 4x2 TRACTOR UNIT WITH ZF16 MANUAL GEARBOX, ZF-INTARDER & AIR CONDITIONING!! 400HP, EURO 2 (6-CYLINDER HEADS)!! ZF16-SPEED MANUAL TRANSMISSION!! ZF-INTARDER!! P.T.O.!! AIR CONDITIONING!! SUN VISOR!! 430-LITER DIESEL TANK!! ETC.!! TRUCK IS IN NICE, CLEAN & GOOD DRIVING CONDITION, READY FOR WORK!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT, OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Transmission: ZF16 manual gearbox + ZF intarder, 16 gears, manual transmission Axle Configuration Tire size: 315/80R22.5 Brakes: disc brakes Front axle: Max. axle load: 7,500 kg; Steered; Tire tread left: 70%; Tire tread right: 70%; Suspension: leaf spring Rear axle: Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inside: 20%; Tire tread left outside: 20%; Tire tread right inside: 20%; Tire tread right outside: 20%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7,800 kg Payload: 11,200 kg Gross vehicle weight: 19,000 kg Functionality Cargo compartment capacity: 430 l Loading platform height: 124 cm Condition Technical condition: very good Visual condition: very good For further information Please contact the Sales Department or Erik Engel for more information.

Condition: used, Year of construction: 2020, Lathes Travel distance X: 293 mm Travel distance Y :130 mm Travel distance Z: 1350 mm turning length: 1285 mm max. turning diameter: 850 mm max. circulation diameter: 420 mm spindle boring: 102 mm Bedpfoyrfl Uex Agzswi input Power: 26 kW max. turning moment: 1123 NM range of revolutions till: 2800 rpm Control: Fanuc I-series powered tools control Fanuc The machine offers a maximum turning length of 1,285 mm, a maximum turning diameter of 420 mm, and a maximum swing over bed of 850 mm. The main spindle provides a spindle bore of 102 mm and a speed range up to 2,800 rpm, delivering high torque and stable machining performance. Equipped with a 12-station turret, driven tools, and a FANUC i-Series control, the machine is well suited for complex turning and milling operations in modern production environments.

Condition: used, machine/vehicle number: XLER6X40005281998, mileage: 875,971 km, power: 368 kW (500.34 HP), first registration: 01/2012, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: other, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2012, Equipment: ABS, air conditioning, parking heater, retarder, = Additional options and accessories = - Leaf spring Bodeyrfnpepfx Agzewi - PTO = More information = Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, Bwsdpfx Agsyffz Nezji 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: ready for operation (used), Year of construction: 1987, turning length: 260 mm, turning diameter: 180 mm, Fanuc OT 10-position turret maximum spindle speed 4500 rpm weight 2300 kg Bsdpfox Ikunex Agzewi

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 520 mm, turning diameter: 568 mm, rotational speed (max.): 5,000 rpm, overall weight: 5,500 kg, Fanuc OT 10-position turret capacity 520x568 mm over bed, 340 mm over slide spindle speed 5000 rpm Bwsdpfx Agsydv Epszoi weight 5500 kg

Condition: excellent (used), Year of construction: 2021, Haas CL-1 Chucking Lathe Haas Control Swing diameter over the cross slide: 279 mm Swing diameter over the table: 126 mm Maximum cutting diameter: 126 mm Bar capacity: 25 mm X-Axis travel: 305 mm Z-Axis travel: 203 mm Spindle nose: 5C Collet type Bjdeyhzu Ijpfx Agzewi Maximum spindle speed: 6000rpm Spindle bore: 31.8 mm 2021 220V Electrics Single Phase For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #79157 Machine Serial Number: 3122432 £2,2500.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 570 mm, turning length: 2,000 mm, spindle bore: 62 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 3 rpm, workpiece weight (max.): 2,000 kg, Equipment: rotational speed infinitely variable, The VDF 560 DUS are the most popular teach-in lathes from VDF Boehringer in terms of turning diameter. With a standard chuck size of 315 mm or more, these machines offer optimal machining efficiency for the production of single parts and small series. This machine is currently on display in our showroom; an on-site inspection is possible! Scope of delivery: Includes drawer cabinet with various tools and Multifix holders. Specifications Manufacturer: VDF Boehringer Model: DUS 560 TI Year: 2005 Condition: Used Stock number: 00164 Maximum turning diameter: 570 mm Maximum turning length: 3000 mm Spindle bore: 62 mm Speed (min-max): 3 - 2500 rpm Spindle power: 19 kW Spindle mount: DIN 55 027 Gr. 8 Bodpfx Ajwv S Rtogzewi Tool turret: Multifix Turret positions: 2 Tailstock taper: MK5 CNC control brand/type: Heidenhain Manual Plus 4110

Condition: good (used), mileage: 427,636 km, power: 105 kW (142.76 HP), first registration: 10/1997, fuel type: diesel, tire size: 225 / 75 / R17.5, axle configuration: 4x2, wheelbase: 3,690 mm, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, suspension: steel, number of seats: 7, total length: 7,140 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 4,030 mm, loading space width: 2,300 mm, loading space height: 1,840 mm, Year of construction: 1997, Equipment: ABS, fog lights, General information Number of doors: 4 Cab: Dubbel Cabine Technical information Number of cylinders: 4 Engine capacity: 7.999 cc Transmission Transmission: ZF, 6 gears, Manual gearbox Axle configuration Tyre size: 225 / 75 / R17.5 Make axles: Iveco Brakes: drum brakes Suspension: leaf suspension Front axle: Max. axle load: 3200 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Max. axle load: 6300 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70%; Reduction: single reduction Weights Empty weight: 4.860 kg Carrying capacity: 6.130 kg GVW: 10.990 kg Interior Interior: grey Condition Technical condition: good Visual appearance: good Bwjdpfoyrdqiox Agzoi Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), Year of construction: 2007, CNC FUSION 640 T, machinable diameter 810 mm, distance between centers 3107 mm, spindle bore 320 mm, driven tools, manual steady rest 300 to 610 mm, and hydraulic follow rest 150 to 350 mm, 12-position tool turret, CONCEP conveyor Bwodpfx Agjygxnxszji

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 230 mm, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, quill stroke: 120 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 3,000 rpm, Swing diameter over bed: 400 mm Swing diameter over cross slide: 230 mm Distance between centers: 1,000 mm Spindle bore: 50 mm Speed: 1–3,000 rpm Quick-change toolpost Three-jaw chuck Tailstock Quill travel: 120 mm Various tools (without cabinet) Bjdpfoyn Dqzex Agzswi Dimensions LxWxH: 2400 x 1450 x 1900 mm

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Bwedpoymk E Aofx Agzsi Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, 660 x 2300 mm, 104 mm passage Bodpfoptabaex Agzewi EVS Variable spindle speed Cooling 2 pieces MT5 Center Standard machine tools Manual and spare parts list 3 claws 12" Sk type 2-axis digital display FAGOR Quick change chisel turret

Condition: good (used), EMCOTurn 120 CNC lathe. Bwjdpfx Agsu Rd S Rjzji 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Ex-College machine

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar passage: 34 mm, controller model: Fanuc 21T Modell B, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar capacity: 34 mm Bwjdpjyrf Enefx Agzsi MACHINE DETAILS CNC control: Fanuc 21T Model B EQUIPMENT CS axis left CS axis right

Condition: good (used), mileage: 921,286 km, power: 368 kW (500.34 HP), first registration: 09/2006, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 600 l, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, total length: 6,400 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2006, = Additional options and accessories = - Tipping hydraulics - PTO = Further information = Technical information Number of cylinders: 8 Engine displacement: 15,607 cc Transmission Gearbox: GR, manual transmission Axle configuration Maximum front axle load: 7,500 kg Rear axle 1: lifting axle; max. axle load: 7,500 kg Rear axle 2: max. axle load: 11,500 kg Weights Unladen weight: 9,105 kg Payload: 17,395 kg Gross vehicle weight: 26,500 kg Functional Body manufacturer: Scania Condition Technical condition: good Identification Bodeynwl Eopfx Agzowi Registration number: BS-DV-11 Further information Please contact Vitali Lenda for more information.

Condition: used, Year of construction: 2010, IMT W20 T2 Vertical Lathe Bsdpfjwb Svgjx Agzswi Control: Fanuc 32i-Model A Turning Diameter: 542 mm Chuck: Schunk 500 160 Turning Length: 450 mm Maximum Swing Diameter: 640 mm Maximum Speed (rpm): 2500 Spindle Power: 29.5 HP X-Axis Travel: 450 mm Z-Axis Travel: 450 mm X-Axis Rapid Traverse: 15,000 mm/min Z-Axis Rapid Traverse: 15,000 mm/min Number of Turning Tools: 6

Condition: used, Year of construction: 2006, with C-axis with driven tools FANUC 18T-C control turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Bwjdpfx Agjr E Amgszoi Upper turret holder with 12 positions, 6 of which are driven Tool presetter Chip conveyor