Used Manual Bending Machine for sale (72,746)

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal Njdpfx Abswiq N Iokjwh OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Nwjdpeyi Hrwjfx Abkoh Weight: approx. 2 tons Good condition

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Nwjdpfxjt Hmlqs Abksh Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: used, Year of construction: 2020, operating hours: 6,493 h, machine/vehicle number: TB25A-008, overall weight: 650 kg, total length: 2,600 mm, total width: 1,000 mm, total height: 1,200 mm, power: 1.4 kW (1.90 HP), Tubobend 25 Machine Data Designation: Tubobend 25 Operating Hours: 6493 h Weight: approx. 650 kg Dimensions: approx. 2600 × 1000 × 1200 mm Technical Data Nodpfx Aboy H I R Rekewh Control System: Siemens SIMATIC Pipe Diameter (max.): 25.0 × 3.0 mm (E 235 with CLR = 2 × D) Bending Radius Rm (max.): 75 mm Bending Radius Ri (min.): 25.0 mm (with bending mandrel 40 mm) Effective Bending Angle (max.): 180° (+10° overbending) Bending Speed (max.): 58°/s Bending Accuracy: ± 0.2° Dimensions (L × W × H): approx. 5,650 × 1,000 × 1,250 mm Weight: approx. 770 kg Connected Load: 1.35 kW (installed) Mains Voltage: 400 V / 50 Hz / 3 phases Mains Fuse: CEE 16 A Color: RAL 7021 Black-Gray / RAL 5015 Sky Blue Performance Data Connected Load: 1.4 kW Bending Data Bending Capacity (Mild Steel): Ø 25.0 × 3.0 mm Max. Bending Radius: 75 mm Max. Bending Acceleration: 58 °/s Bending Accuracy: ± 0.2°

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Shaft diameter ø 120 mm Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 Nodpfx Absummkaokewh IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Year of construction: 2024, condition: new, MRB-S Series Technical Specifications (See Images) Standard Equipment CE compliant Nwjdpfxofin E De Abkeh Conical bending Motorized back roller Additional control panel for upper and lower rollers operated by the chassis. SAE 1050 steel rollers Induction-hardened rollers, Stress-relieved steel construction, on 2.5 and 3m machines, support system, braking system for precise bending, Digital display. Motorized back roller with tension Optional Equipment Motorized lower roller mounting, ground rollers Extended rollers for profile bending, Special rollers for profile bending, Special packaging for international shipments. MRB Series: Technical Specifications (See Images) Standard Equipment CE standard Digital display Conical bending Motorized back roller with tension Additional control panel for upper and lower rollers, operated by the chassis. Chassis operated. SAE 1050 steel rollers, Induction-hardened rollers, Stress-relieved steel construction, Braking system for precise bending. Optional Equipment Motorized lower roller with tension, ground rollers Extended rollers for profile bending, special rollers for profile bending, Special packaging for international shipments. Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines to the entire world and has established itself as one of the world's largest manufacturers of sheet metal processing machines with its headquarters in Turkey. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA Maschinen are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, providing you with competent advice and assistance when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would be happy to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bend allowance: 5 mm Bending capacity: 6 mm Bend allowance: 5 mm Bending length: 2,030 mm Roller diameter: 170 mm Motor power: 4 kW Njdpfxjftdh Is Abkjwh Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Control unit – with NC control Conical bending unit Side roller positioning synchronized electronically via PLC Safety mechanism for welding (welding capability) on the machine Machine body made of stress-relieved, annealed steel 4-roller drive system – upper and lower rollers driven by hydraulic motor via planetary gearbox, synchronized (ᐳ 430 mm) Electrical and hydraulic protection against overloads Lower roller pressure hydraulically adjustable Nwjdpfxodzzyfs Abkjh Hydraulic roller brake, prevents the sheet metal from slipping back Hydraulic pivoting of the upper roller bearing for easy removal of the formed sheet metal Safety wire Induction-hardened rollers (HRC 54), manufactured with a slight bulge Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Upper roller: 230 mm Lower roller: 210 mm Maximum roller spacing: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Nwjdpowbvmiofx Abkoh Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, CNC universal tool grinding machine SCHÜTTE, type BU 400 CNC 4 Machine – Defective – without control system Machine not operational – electrically non-functional – without CNC control Manufacturer’s No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Distance between centers (height) 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Nsdpfod Rmcmex Abkewh Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Mains connection 380 volts, 50 Hz, 25 amps - CNC control system removed Space requirement L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control system missing. Mechanically in good condition, ideal for retrofitting with a new control system Suitable as a source of spare parts or for rebuilding with a new control system

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Nodpfx Aohmmfkjbkewh Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition Nodpspu R Nvsfx Abkjwh

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Nodpfx Ajttc Uaobkewh

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories Nwodsu Ibzkspfx Abkeh *

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools Njdpfxswivn Nj Abkswh *

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm Nodpfx Abou Ibvuekswh -12 div. collets -div. auxiliary and clamping devices *

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm Nwedpfx Abeu Icdyjkjh *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Nwjdoxu Dxqepfx Abksh Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) Nsdpfsu Ibukox Abkowh - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts *

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen Nodpfou Ibu Rex Abkowh bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. Nwjdsu Ibyyspfx Abkoh The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Year of construction: 2006, condition: excellent (used), Manual packaging machine. Njdpfx Ajiz S Ifobkowh

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Nedpoyh D Nnjfx Abkswh Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine xH: 5,3 x 2,4 x 2,0 m

Condition: ready for operation (used), Year of construction: 2011, Stierli bending machine 300 HE / Like new, maximum 5 operating hours -CE marking -Year of manufacture 2011 -Max. working pressure 300 KN -Stroke length 300 mm -Motor power 4 kW -Manual control -Foot switch -Various bending tools Nwodpfx Abjzbtfhokjh -Stop -Documentation Dimensions: L x W x H 1.5 x 1.2 x 1.5 meters / Weight 850 kg Errors and omissions excepted.

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Nodspxmauspfx Abkowh Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets