Used Manual Bending Machine for sale (72,952)

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm Djdpfxsfg Th Ae Afmekp -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine Dksdjh S Ti Espfx Afmjp -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg Dodpfxolcfiie Afmskp

Condition: good (used), Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 Djdpfoip Eq Dsx Afmjkp -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 2,5" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg Dkedpfsx Nfhrex Afmep

Condition: good (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm -Roller diameter: 90 mm Dsdpfsx Ir Dwjx Afmekp -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, Dedpfxscn Rd Rs Afmekp -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Condition: good (used), Bending tool, die, upper blade, upper tool, upper jaw Dkjdpfxjip Eqre Afmjp -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Condition: used, Year of construction: 1970, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 Dsdpfxoywzhqs Afmekp -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw Dodocn Shuepfx Afmokp -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic Dkedoyb R Ndepfx Afmsp -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm Dkodpody Rhdofx Afmop -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw Dodsip Eqkepfx Afmskp -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm Dedjcx T E Rjpfx Afmekp -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine Djdpfx Afjyb R Aksmekp -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine Dedpfx Afoywzlpomjkp -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: used, Bending tool, die, upper knife, upper tool, upper beam Dodecn Shrjpfx Afmjkp -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos Dkodpfogxgm Hjx Afmep -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment Dsdpfxezichas Afmjkp • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 4350, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, sheet thickness (max.): 20 mm, overall weight: 14,200 kg, working length: 2,000 mm, TECHNICAL DETAILS Bending length: 2,000 mm Max. sheet thickness: 20 mm Bending capacity: 15/11 mm Bottom roller diameter: 280 mm Top roller diameter: 300 mm MACHINE DETAILS Drive power, main drive: 16.2 kW Drive power, top roller drive: 4.8 kW Drive power, bottom roller drive: 3.7 kW Dodpfozi D Saox Afmjkp Weight: 14,200 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Dodpfx Afjzh I Iijmjkp Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Djdpfxjzgci Es Afmekp Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), profile bending machine Dedpswtph Defx Afmskp

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units Dkodpfxezdfb Tj Afmop EQUIPMENT Documentation CE marking

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Dsdpfepwpxcox Afmokp Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition