Used Mandrel Bend for sale (3,638)

Condition: new, Year of construction: 2025, pressing force: 20 t, – Capacity 20 tons – Bending capacity 200 x 12 mm Prsdpfx Ajvt Eunog Dsd – Stroke 200 mm – NC touchscreen control – Foot control – Emergency stop – 400V

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Podpfx Agovvx E Ss Djrd weight of the machine ca. 1 t

Condition: excellent (used), Year of construction: 2018, Operating hours: 19,000 h Prodpfx Ajxvp Tpjg Dsd

Condition: new, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm Pjdpfxsw U U Uds Ag Dsrd min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Year of construction: 2016, condition: ready for operation (used), Two identical Brabender belt weighers are available. Belt width: 350mm, max. throughput: 1800kg/h, inlet diameter: 200mm, outlet diameter: 250mm, load cell nominal load: 5kg, accuracy: +/-1%, max. belt speed: 27m/min, max. bulk good density: 1.5kg/dm³. Machine dimensions X/Y/Z: approx. 1500mm/700mm/700mm, weight: approx. 180kg. Documentation available. On-site viewing possible. Podpfx Agoxxl N Se Djrd

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Prsdpfjxf Utajx Ag Djd Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: new, - Capacity 16-76 mm - With 10 rollers - Angle adjustment Podpfx Agsphqgzs Dsrd - Documentation - 400V

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze Prodpfx Ajndz Npsg Dsd pressure 50 t

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! * Pedpfx Ajxu Dxqjg Derd

Condition: excellent (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm Equipment: Pjdpsxn Tydefx Ag Djrd - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: used, Year of construction: 2023, gebraucht 2023 8298 prompt, Zwischenverkauf v Türkei 30300 € 1 2550 mm 1.5 mm 1 mm 2 mm Motorisch 155 ° 110 mm 3800 mm 2350 mm 1650 mm 2500 kg 1000 mm 300 mm/s 0.1 +/- mm 0-20 mm 100 °/sek 90 mm/s Demo machine / mint condition net price (price for new machine € 37.870,00) CNC CONTROL WITH TABULAR PROGRAMMING - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage Pedpfx Agswircpe Dsrd - remote service connection via WLAN - detailled alarm, tool and paramter page back gauge 1000 mm with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters upper tool in one pice, 20° manual height adjustment of bending beam foot pedal with 3 switches ligtht barrier on the front side

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Predpsxn T Nrofx Ag Ded Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: new, pressing force: 10 t, - Capacity 10 tons - Bending capacity 150 x 8 mm Podpsu Sl U Aofx Ag Derd - stroke 200mm - NC touch screen control - Foot control - Emergency stop - 400V

Condition: good (used), Year of construction: 2006, CNC tube bending machine by Dynobend Model: CB 60 Year of manufacture: 2006 Tube length: 4500 mm Pjdpfxjwx I Iaj Ag Dsrd Including various tools: Round 40 R 60 Round 28 Round 32

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. Pedpfxju Id Rus Ag Dord *

Condition: used, Year of construction: 2020, sheet width 2100 mm plate thickness 3,0 mm distance between columns 2450 mm daylight opening 160 mm max. 150 ° back stop - adjustable 6,0 - 1000 mm Control CNC total power requirement 5,37 kW dimensions 3250 x 2450 x 2100 mm Pjdpfx Agjt Smm Eo Dsrd weight of the machine ca. 3850 kg ORIGINAL PRICE: ~ 60,000 EURO Features: - ERBEND 15.6" CNC control panel operating unit - Electric backgauge from 6.0 to 1,000 mm * Material support table with ball rollers * Drive with servo motors - LED machine lighting - 1x 30° upper tool - radius 1.0 mm - 1x bending rail 15 mm / 1x bending rail 25 mm - Electric safety device at the front (light barriers) - Freely movable foot control - Operating instructions - CE declaration Special accessories included: - Split gooseneck upper tool, height = 90 mm - CNC electric motorized lower beam adjustment - Manual crowning of the bending beam

Condition: new, – Capacity: 34 x 3 mm Psdpjxq Hl Ejfx Ag Dord – Digitally adjustable stroke – Emergency stop switch – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm – Documentation – Weight: 80 kg – 400V

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm Podpeu Ickyofx Ag Dord hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Year of construction: 2024, condition: new, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm Pedpfx Asq Sz Ahsg Djrd - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: as good as new (ex-display), I-beam section - upend 120 x 25 (d 1600) mm bar material dia. max. 140 x 3 (d 3000) mm L-beam 100x100x10 (d 1600) mm square material 140 x 40 x 3 (d 4000) mm I - beam section - flat steel 200 x 35 (d 1000) mm bar material - diameter 70,0 (d 800) mm tool taper 100,0 mm 0 315 mm turning speeds 5,4 m/min. Prsdpfx Agoxcukyo Djd total power requirement 11,0 kW weight 2.240 kg range L-W-H 1500 x 1650 x 2100 mm Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x hydraulically adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German

Condition: as good as new (ex-display), I-beam section - upend 120 x 25 (d 1600) mm bar material dia. max. 140 x 3 (d 3000) mm L-beam 100x100x10 (d 1600) mm square material 140 x 40 x 3 (d 4000) mm I - beam section - flat steel 200 x 35 (d 1000) mm bar material - diameter 70,0 (d 800) mm tool taper 100,0 mm 0 315 mm turning speeds 5,4 m/min. total power requirement 11,0 kW weight 2.240 kg Prodpfxoxcukte Ag Ded range L-W-H 1500 x 1650 x 2100 mm Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x hydraulically adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German

Condition: as good as new (ex-display), Year of construction: 2025, I-beam section - upend 100 x 20 (d 2100) mm bar material dia. max. 100 x 3 (d 3000) mm L-beam 80x80x8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm I - beam section - flat steel 120 x 30 (d 600) max.140b mm bar material - diameter 60.0 (d 1000) mm tool taper 80.0 mm oil volume 100 Liter turning speeds 4.2 m/min. weight 1600 kg range L-W-H 1240 x 1375 x 1540 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Predpfxoxcukge Ag Dod Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x hydraulically adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2025, I-beam section - upend 100 x 20 (d 2100) mm bar material dia. max. 100 x 3 (d 3000) mm L-beam 80x80x8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm I - beam section - flat steel 120 x 30 (d 600) max.140b mm bar material - diameter 60.0 (d 1000) mm tool taper 80.0 mm oil volume 100 Liter turning speeds 4.2 m/min. weight 1600 kg range L-W-H 1240 x 1375 x 1540 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers Pjdpfx Ajxcukmeg Derd - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x hydraulically adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity Pedpfx Agsxcui No Dord - Operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° Podpfx Agoxcukao Dord - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German