Used Mag Drill for sale (7,991)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: Gbsdpfsyrhtnex Aiksw • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1595 € 23 mm 19 mm Weldon 1.6 kW M20 266 mm Gbjdpfx Aisyrht Iskow 259 mm 500 mm 17 kg 23 mm 50 mm 75 mm 190 mm 160 - 250 / 390 - 580 U/min 8 mm The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. Features and benefits: • powerful motor with heavy duty 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor if machine breaks away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base (ESB) uses only 50% of its power when motor is not running • Semi-automatic gib adjustment enables simple, fast, correct and repeatable slide backlash Settings without any expert knowledge or experience • intuitive control panel at top of the drill • large coolant container Standard shipping set: • Drilling machine • Plastic box • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”)Weldon tool holder • Safety strap • Cooling system • Protective spring for cooling hose • MT2 drift • 6 mm hex wrench • 5 mm hex wrench with a handle • 2.5 mm hex wrench • 8 mm combination wrench • Tool can • Operator’s Manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 lt Vacuumpad Compressed air ecjector Pipe attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm Gjdpfx Aisyrhqtokebw 36 mm 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information Gbjdpfx Aeyrhppjiksw • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: good (used), Year of construction: 2018, Flame-cutting and drilling machine Plate processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool turret Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm Gbedpfx Aievzrczekew V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point cross conveyor Number of carriages: 2 clamps NC feed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable discharge table and slide into material collection container for discharging small components. Filter unit incl. piping High-performance for use with carbide tools. For drilling, threading, marking, milling, plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license 121126ä Availability: immediately!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year: 2020 Workpiece length (X): 200mm to 2500mm Workpiece width (Y): 70mm to 850mm Workpiece thickness (Z): 12mm to 60mm Gbjdpfszvxz Ajx Aikew Safe clamping system protects delicate panel surfaces Power supply: 400V (3 phases), 50Hz

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-8843, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine from HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Gedpfx Ajzvx Ucjikobw Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year of manufacture: 2022 Workpiece length (X): from 200mm to 2500mm Workpiece width (Y): from 70mm to 850mm Workpiece thickness (Z): from 12mm to 60mm Safe clamping system to protect delicate surfaces Power supply: 400V (3 phases), 50Hz

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Gsdoylp Slopfx Aikjbw Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Nagel Citoborma 280B Paper Drill The unit is in 100% working order. It is one of the latest models. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. Gbjdez S Upmopfx Aiksw The installed table is an enlarged version. Additionally, the paper drill is equipped with an automatic table lock that releases after every cycle. Excellent condition. Robust construction – weight: 76 kg. Power supply: 380V. Two drilling heads with an adjustable spacing range of 45–120 mm. Drill bit diameter: 2–20 mm. Stack height: 60 mm. The machine has undergone a full inspection. Includes drill bits, tools, a new cutting stick, and an instruction manual.

Condition: good (used), Hang 114-30/4 Paper Drill Machine The unit is in perfect condition and 100% functional. A top-tier machine in the category of paper drills. This is a currently manufactured model, featuring the most comprehensive equipment configuration available. Equipped with two integrated frequency converters (inverters) for stepless spindle speed adjustment (260 – 1,800 rpm) and smooth table elevation. Rapid drill zeroing/alignment system. The drilling table is adjustable in all planes; the margin (backgauge) setting is controlled via dial indicators. Waste material is directed into an external container. Gbjdpfx Aisz S Un Ajkow Operated via an electric foot switch. Energy-saving standby mode. Automatic drive belt tensioning. Each drilling head features independent adjustment, allowing for the use of drills of varying lengths. Includes a cooling and lubrication system for the drills. Technical specifications: Number of drilling heads: 4 Drill diameter: 3–10 mm Stack height: 65 mm Drill spacing: min. 36 mm / max. 260 mm Table dimensions: 600 x 480 mm Power supply: 400 V Weight: 400 kg The machine comes with documentation, maintenance tools, and drill bits.

Condition: good (used), Stago PB 2015 Paper Drill The latest model from the manufacturer Stago; this machine comes from the office of a large company. Gjdpfx Asz S Uwqsikobw The unit is 100% functional. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill is equipped with an automatic table-locking mechanism. Robust construction – weight approx. 70 kg. Power supply: 380V. Two drilling heads. Drill bit diameter: 2–10 mm. Stack height: 60 mm. Adjustable spacing between the heads. The drill has undergone a full inspection. Includes drill bits and tools.

Condition: good (used), Nagel Citoborma 111 paper drill The unit is 100% functional and in very good condition. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. Robust construction – weight: 35 kg. This is one of the latest Citoborma drill models, currently still in production. Power supply: 230V. Drill bit diameter: 2–9 mm. Stack height: 50 mm. Includes drill bits, a new drilling stick (cutting strip), and an instruction manual. Gbedpjz S Ui Hjfx Aikow Made in Germany.

Condition: new, machine/vehicle number: 37 R9633-2, Drilling diameter with twist drill: up to 13 mm Drilling diameter with core drill: up to 35 mm Drilling stroke: 115 mm Motor power: 680 W Electrical connection: 220/240 V Magnet base dimensions: 92 x 172 mm Weight: 13 kg Gbsdpec N T Hrofx Aikow

Condition: used, Year of construction: 2018, machine/vehicle number: 0-250-82-8302, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of slots in tool magazine: 4, controller manufacturer: HOMAG powerTouch / PC86, HOMAG DRILLTEQ V-500, year of manufacture 2018. Vertical CNC machining center with two independent machining supports (split head). A total of 20 vertical and 16 horizontal drilling spindles. HSK63 milling spindle with 10 kW in intermittent operation and 8.5 kW in continuous operation. Quadruple pick-up tool changer. Glue and dowel insertion unit with oscillating conveyor. Workpieces up to 3050 mm in length, 1250 mm in width, 80 mm in thickness, and 60 kg in weight. powerControl PC86 with powerTouch. woodWOP 7.1 as per screenshot. Windows 7 according to manufacturer configuration. Gedpfx As Agxfrsikobw Technical manufacturer documentation and layout plan available. Location: Basel area, Switzerland. Availability by arrangement. Price on request. Scope of delivery, tools, and software licenses to be agreed upon. Subject to change and errors.

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 58281, working width: 1,700 mm, input voltage: 400 V, working length: 2,200 mm, number of slots in tool magazine: 18, control type: CNC control, Rittal Perforex BC 1007 HS CNC drilling and milling centre for automated machining of enclosures and flat panels: cut-outs, holes and threads straight from EPLAN Pro Panel / DXF. Built 2018 in Germany. Machine no. 58281, Rittal part no. 4050.107. Specification: - Clampable flat panels (W x H): 2450 x 1700 mm - Max machinable panel area: 2200 x 1700 mm - Clampable enclosures (W x H x D): 1400 x 1600 x 1600 mm - Max machinable area, enclosures: 1200 x 1600 mm - Tool holder: pick-up system, 18 positions - Control: 4-axis CNC, Rittal OptiPanel, 15" monitor - Electrical supply: 400 V, 3-phase, 50 Hz, 32 A max - Control voltage: 24 V DC - Footprint (W x H x D): 4390 x 2410 x 2720 mm Gbsdpfx Ae Ahq D Hjiksw - Transport size (W x H x D): 3800 x 2300 x 2500 mm - Weight: approx. 2,300 kg Key features: - Enclosure (cube) and flat-panel machining - Pressure plate with swarf extraction - High-performance spindle, minimum-quantity lubrication - Automatic tool breakage check - Pneumatic clamping, DIN tooling - Machines mild steel, stainless, aluminium, copper and plastics - Direct import from EPLAN Pro Panel, DXF import Supplied with: - Safety guarding with light curtains - Operator console and keyboard - Tool magazine with tooling - Rear enclosure-machining bay - Control cabinet - Operator documentation Specification from Rittal published data for the BC 1007 HS; buyer to verify configuration on inspection. Viewing by appointment in Sunderland, UK. Buyer to arrange disconnection and collection unless agreed.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 50,457 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 200 mm, total length: 8,500 mm, total height: 3,800 mm, total width: 4,300 mm, type of input current: three-phase, workpiece diameter (max.): 250 mm, overall weight: 15,000 kg, controller model: Siemens 840 D sl, For sale is a MAG DVT250, year of manufacture 2011. Equipped with a Siemens 840 D sl control system. Equipment: - Infeed and outfeed conveyor - Chip conveyor (discharge to the right) - Coolant system - 2x tool turrets 12x VDI30 The machine is under power and can be inspected. *The marking unit (Richter [picture 1 right]) is defective and not part of the listing. Gbsdpfsxc Eniox Aikjw

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, * Drilling head with 8 spindles (V8 SW/32) * Horizontal drilling head with 4 spindles on the X-axis * Horizontal drilling head with 2 spindles on the Y-axis Gedpfx Aovtyc Hoikjbw * Groove saw, D=100 mm (X-axis direction) * Clamping cylinder for positioning the workpiece * Workpiece clamping system * Workpiece length 2500 mm * Workpiece thickness 12-60 mm * WOODWOP for the machine * WOODWOP IMPORT DXF BASIC (1 license)

Condition: good (used), Year of construction: 2024, bore capacity in steel (diameter) 55.0 mm throat 400 mm bore stroke 200 mm threading M 42 in ST turning speeds 45.0 - 2000 U/min table: 600 x 600 mm bore spindles - Morse Taper 4 MK column diameter 200 mm feed 0.1 / 0.15 / 0.2 mm/U distance spindle /table 130 - 725 mm T-slots 3x 18 x 160 mm table swivelabel .0 Grad table load 350 kg engine output 2.2 / 2.8 kW weight 7 kg Machine height 1060 x 850 x 2545 mm Current list price: approx. 11.000 euros Special price upon request In good condition (!!) Features: - OPTIMUM OPTIdrill DH 55 G gear-driven drill press - Heavy-duty model with automatic quill feed -INDUSTRIAL- - Heavy-duty, solid cast-iron bench drill press - Electrically operated quill feed Gbjdpfx Ais Aiirxskjw - Thread-cutting device - Drilling depth stop - Automatic gear lubrication via oil pump - Large, solid drill table * heavily ribbed on the back, /- can be tilted degrees to the side - solid base plate with two parallel T-slots - coolant system - 24-volt DC electronics - operating instructions

Condition: good (used), Year of construction: 2024, bore capacity in steel (diameter) 55.0 mm throat 400 mm bore stroke 200 mm threading M 42 in ST turning speeds 45.0 - 2000 U/min table: 600 x 600 mm bore spindles - Morse Taper 4 MK column diameter 200 mm feed 0.1 / 0.15 / 0.2 mm/U distance spindle /table 130 - 725 mm T-slots 3x 18 x 160 mm table swivelabel .0 Grad table load 350 kg engine output 2.2 / 2.8 kW weight 7 kg Machine height 1060 x 850 x 2545 mm Current list price: approx. 11.000 euros Gbedpfx Aio Aiir Askjw Special price upon request In good condition (!!) Features: - OPTIMUM OPTIdrill DH 55 G gear-driven drill press - Heavy-duty model with automatic quill feed -INDUSTRIAL- - Heavy-duty, solid cast-iron bench drill press - Electrically operated quill feed - Thread-cutting device - Drilling depth stop - Automatic gear lubrication via oil pump - Large, solid drill table * heavily ribbed on the back, /- can be tilted degrees to the side - solid base plate with two parallel T-slots - coolant system - 24-volt DC electronics - operating instructions

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER with AW 5000 Hose Package ✅ Scope of supply: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Standard equipped with flow control, thermocontrol, and coolant filter. The cooling unit switches off if the water cooling system fails or becomes too hot, to protect the hose package. These functions cost approximately €400 more at Fronius. ➤ Fronius VR 7000 wire feeder case – Compact and practical – in our opinion, the most useful wire feeder case – the wire is safely stored in the closed case. ➤ Fronius intermediate hose package, long – each unit is supplied with a 5-meter long connecting hose package between the power source and the wire feeder case for greater flexibility and easier handling. Take the wire feeder case with you to locations that are more difficult to access! The connecting hose package is neatly attached to a hook on the side of the unit. (The hooks are manufactured by us) ➤ Fronius large trolley – Probably the best trolley with gas cylinder holder on the market. ➤ Ground cable 3-4m ➤ Pressure regulator from Messer, new ➤ Spool adapter for large wire spools, new With this unit, almost all materials can be welded, including aluminum, steel, and V2A. It has filler wire programs and is also suitable for MIG brazing (Cusi), which is often used in the sheet metal industry. Additional options are available at an extra charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a unit will receive an additional 2nd hose package free of charge. IMMEDIATELY AVAILABLE VAT INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via Whatsapp and Viber. ✅ Questions ✅ Questions ✅ Questions ✅ Questions: ✅ Questions ✅ Questions ✅ Questions ✅ ►►► What is the condition of the units? For clarification, we buy like-new used units, disassemble them, check everything, and replace any worn parts if necessary. Only after a successful test weld is the unit approved for sale. "All" units are clean and have no burn marks on the displays or numerous burn marks or dents on the unit. You are buying from us an item that is also worth seeing and does not look completely worn out! ►►► Do we receive an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for an intra-community delivery within the EU are met. ►►► What payment options are available? Advance payment or cash upon personal collection. ►►► Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We are familiar with these units and do not sell anything that we do not know about. All prices are starting prices; you can configure the units with us. Robot unit or hand unit. Long or short connecting hose package. Gsdpfewbillox Aiksbw Various hose packages to choose from. Synchro pulse. 270, 400, or 500 ampere units in stock. CMT version available as hand or robot unit. It is best to call us; we will discuss your application area, and you will receive an initial price estimate from us.

Condition: used, Year of construction: 2013, Technical details: Gbedpfx Aiouyp Enjkow faceplate diameter: 800 mm power requirement: 110 kW weight of the machine ca.: 37.000 / total 52.000 t transport measurements machine: 5,07 x 2,98 x 3,90 m clamping diameter: 800 mm : Ø 800 x 720 mm Tool bore: Capto C6 tools in tool magazin: 2 x 80 With C-Axis *

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump Gbjdpfxo Ahrhie Aikew • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors in technical data and prior sale reserved.

Condition: good (used), Year of construction: 1970, machine/vehicle number: 232577, Offer 26302 Technical specifications: - Drilling capacity in steel ST 42: 32 mm - Drill spindle mounting: MK 3 - Drill spindle stroke: 180 mm - 4 drill spindle speeds: 135 - 730 rpm - Overhang: 320 mm - Max. distance table - drill spindle: 560 mm - Round table with 2 T-slots: 440 mm - Height adjustable via rack and pinion with hand crank - Power supply: 400 V - Space requirement: approx. W 700 x H 1850 x D 900 mm Gbedpfx Aij Akcuyskow - Weight: approx. 300 kg - Includes: - Quick-release chuck 1-13 mm - Assorted drill bits - Machine vise

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: AC, table width: 700 mm, table length: 850 mm, Hinge drilling machine, GRASS, type Ecoflex, with row drilling head and hinge drilling head. Gsdpfx As Ahqy Uoikjbw

Condition: ready for operation (used), Gillardon GB 40 VE 40 – 1100 Drilling Machine, Column Drilling Machine Drilling capacity (steel): approx. 40 mm Drilling capacity (cast iron): approx. 50 mm Threading capacity: M27-M33 Tool holder: MK4 Speed range: 60-1600 rpm (continuously variable) Feed rate range: approx. 0.1; 0.16; 0.25 mm/rev Albrecht drill chuck: Spindle stroke: 200mm Overhang: 350mm Footprint: 1200mm x 800mm x 2100mm (L x W x H) Coolant pump You are welcome to visit us for an inspection. We can also arrange affordable shipping for you! Gedpfxj Ai Raxj Aikebw You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.