Huvema hu 16 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

Tryout Press - hydraulic HUVEMA HU 160 MMH

Krefeld, GermanyGermany dealership location
6370 km
2016
used
pressure 160 t stroke 400 mm table surface area 1100 x 635 mm pressing speed 6,57 mm/sec return speed 11,62 mm/sec oil pressure max. in the work cylinder 412 bar oil volume 40 l dia. of piston 145 mm column daylight 1120 mm voltage 400 V / 50 Hz dist. between pillars (front to rear) 350 mm total power requirement 5,5 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,7 x 0,9 x 2,1 m Benyvxhnbx • unused workshop press, • manual and hydraulical operation, • horizontally moveabl... more
5

Tryout Press - hydraulic HUVEMA HU 160 MMH

Krefeld, GermanyGermany dealership location
6370 km
2016
used
pressure 160 t stroke 400 mm table surface area 1100 x 635 mm pressing speed 6,57 mm/sec return speed 11,62 mm/sec oil pressure max. in the work cylinder 412 bar oil volume 40 l dia. of piston 145 mm column daylight 1120 mm voltage 400 V / 50 Hz dist. between pillars (front to rear) 350 mm total power requirement 5,5 kW weight of the machine ca. 1,2 t Benysx2uzn dimensions of the machine ca. 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveabl... more
2
bore capacity in steel (diameter) 16 mm throat - mm bore stroke - mm spindle taper MT2 distance spindle /table - mm spindle turning speed range 400 - 5000 U/min Table dimensions 365 x 455 mm base plate 530 x 365 mm voltage 400 V column diameter 75 mm total power requirement 0,75 kW Nlmfh weight of the machine ca. 130 kg Heavy duty v-belt driven column drilling machine with variable speed. table and head height adjustable swivelling head flexible LED light quick-acting drill chuck 3-16 mm ... more
1

Table drilling machine HUVEMA HU 16-2 Topline

More Huvema Hu 16
Barsbüttel/Hamburg, GermanyGermany dealership location
6488 km
2014
new
Bit diameter max.:16 mm Boring depth max.:80 mm spindle taper:MT2 MK turning speed range:280 - 3000 U/min Cz0govlm Steps of speed:12 distance between spindle-column:185 mm column diameter:70 mm range L-W-H:400 x 230 x 1000 mm engine output:0,37 kW rapid clamping chuck 1-16: quiet engine: table height adjustable: telescopic drilling chuck protection: more
2

Bench Drilling Machine HUVEMA HU 16-2 Topline

More Huvema Hu 16
Bottrop-Grafenwald, GermanyGermany dealership location
6375 km
2019
new
bore capacity in steel (diameter) 16 mm throat 185 mm bore stroke 80 mm spindle taper MT2 distance spindle /table mm spindle turning speed range 12 / 280 - 3000 U/min Table dimensions 185 x 185 mm base plate 400 x 230 mm Dvhyjfj voltage 230 V total power requirement 038 kW weight of the machine ca. 60 kg dimensions of the machine ca. 1390 x 600 x 260 mm more
1
bore capacity in steel (diameter) 16 mm throat - mm bore stroke - mm spindle taper MT2 distance spindle /table mm spindle turning speed range 400 - 5000 U/min Table dimensions 365 x 455 mm base plate 530 x 365 mm 2rgmbi voltage 230 V column diameter 75 mm total power requirement 0,75 kW weight of the machine ca. 110 kg more
1

Radial Drilling Machine HUVEMA CRDM 3050 x 1600 Topline

Bottrop-Grafenwald, GermanyGermany dealership location
6375 km
2019
new
bore capacity in steel (diameter) 50 mm Bix9ch3x arm length 350 - 1600 mm workpiece height max. 1420 mm spindle taper MT 5 spindle turning speed range 56 - 1450 U/min threading: M 40 mm quill stroke 270 mm feed range - spindle 0,06 - 0,10 - 0,20 mm/U slide adjustment -horizontal 1250 mm table-size 630 x 500 x 500 mm column diameter 320 mm base plate 2550 x 970 x 200 mm no. of turning speeds 12 total power requirement 3,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2670 ... more
3

Radial Drilling Machine HUVEMA CRDM 3050 x 16/1

Bottrop-Grafenwald, GermanyGermany dealership location
6375 km
2019
new
bore capacity in steel (diameter) 50 mm arm length 350 - 1600 mm workpiece height max. 1250 mm spindle taper MT 5 spindle turning speed range 25 - 2000 U/min threading: 30 mm quill stroke 315 mm feed range - spindle 0,04 - 3,2 mm/U slide adjustment -horizontal 1250 mm table-size 625 x 500 mm column diameter 350 mm total power requirement 4 kW weight of the machine ca. 3500 kg dimensions of the machine ca. 2,5 x 1,07 x 2,84 m The Huvema radial drill range is unbeatable in price and performanc... more
1

Thread-Cutting Machine HUVEMA AT 16/II

Bottrop-Grafenwald, GermanyGermany dealership location
6375 km
2019
new
M3-M16 Weight 27 kg Dwij2u working range 200-1900 mm turning speeds 300 U/min more
1

Thread-Cutting Machine HUVEMA AQ 16-950

Bottrop-Grafenwald, GermanyGermany dealership location
6375 km
2019
new
thread dia. M3 - M16 mm turning speeds 300 U/min throat 100 - 950 mm weight 25 kg Pneumatic tapping machine up to M16, with a large radius. Supplied with various adapters, [...] for drilling and a 90° adapter for tapping in all directions. Accessories: Yr0tsw M3-M16 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection more


huvema hu 16
daily

New machines via email!

Stay updated!
3

stationary compactor , waste press HUSMANN MP 1600

Sankt Peter im Sulmtal, AustriaAustria dealership location
476 km
2004
used
Due to the high compaction force the volume of the materials to be compacted will be reduced considerably. The compactors can be combined with containers for all common lifting devices. The compactor and container can be fixed to each other by a coupling device which is simple to handle. Advantages of HUSMANN stationary compactors Sturdy construction High compaction On swop device for easy transport Separate power unit Adjustable slide blocks total power 11 kW length without aggregate 4685 mm ... more
14

Internal Grinders CHURCHILL UAC Internal Grinder 46" /1168mm Swing Over Bed

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 23239 Grinding Diameter Internal Range 1"-40" Swing over bed 46" / 1168mm Table traverse 28" / 711mm Table traverse speed Variable Work head speeds 8 Off Work head swivels 45-0-45 Degrees Work head offset movement 30" / 762mm Grinding head cross movement 6" / 152mm Input 380/420/3/50 ac 5 hp-Wheelhead, 3/1.5/1.5/0.75 hp-Workhead Fitted with 36" / 914mm Diameter Faceplate & Wheel Dresser Length 11'2" / 3.4m Width 6'10" / 2.08m Height 6'8" / 2.03m Cbep2q7s Nett weight approx. 6 ton / ... more
6
Vehicle data - make: LAFIS - type: LEH 16 C / / pallets pallet truck is easy to use - type of drive: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2000 - operating hours: 5211 - internal No.: C0033 _____ Mast data - mast type:-lifting height: 0 mm - height: 1350 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1350 mm - weight: 650 ... more
6
Single column - eccentric press SCHULER type PEDr 160/400 Masch. No. 60/21545/3 year 1960 Pressure 160 ton. Throat depth 400 mm Bd0ayichjl Wide between the side stand 440 mm Table size 1000 x 800 mm Plunger area 710 x 450 mm Stroke adjustment 30-140 mm Tappet adjustment range approx. 110 mm Mounting height approx. 500 mm Stroke rate 45 strokes/min. Table height above ground 940 mm Table opening ø 260 mm Motor power 15 kW Power supply 380 v, 50 Hz -Wheel transmission -mechanical ... more
5

Vacomat 140/160 XPe Schuko Vacomat 140/160 XPe

Hochheim am Main, GermanyGermany dealership location
6537 km
2011
used
used dust collectors Beq8l08dc8 Year of construction: 2011 Condition: very well maintained V nen: 1450 m² / h Negative pressure: 1600 pa 400 V Suction connector 160 mm Motor 2,2 kW Filter surface 9.5 m² L x W x H 2045 x 870 x 2125 mm Weight: 362 kg Availability: short term Location: Hochheim more
13

Lathes Schuette SE 16

Kaiserslautern, GermanyGermany dealership location
6526 km
1985
ready for operation (used)
General Data Measurements width 1100 mm Measurements depth 2700 mm Measurements height 2200 mm Machine weight 4500 kg This Schuette SE 16 Lathe was manufactured in the United Kingdom in 1985. This machine presents perfect conditions, as it has been totally rebuilt in 2016. Rfojsilu Application Types Turning more
6

- USED - 3-AXIS CNC LATHE VICTOR TAICHUNG Vt-46/165CV

Matelica (MC), ItalyItaly dealership location
7203 km
2004
ready for operation (used)
MAX ROTATING DIAMETER: 730 mm MAX TURNING LENGTH: 1750 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 110 mm Be9ftg9y0o SPINDLE: 1500 rpm; 30 - 37 Kw; ASA A2-11 ; 530 mm X-AXIS TRAVEL: 156 + 251 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 12 - 15 m/min DRIVEN TURRET HEAD: 12 (6 DRIVEN TOOLS) POS; 2500 rpm; 5,2 Kw HIGH PRESSURE COOLANT: 4 BAR CONTROL UNIT: FANUC 0i-TB WEIGHT: 13500 Kg OVERALL DIMENSIONS: 6210 x 2980 x 2515 mm ACCESSORIES: SWARF CONVEYOR NOTE: No1 AXIAL DRIVEN ... more
3
Huvema drilling machine offered. Type: HU 20 Max drilling diameter: 20 mm Goazr299y Table: 395 x 395 mm Stroke spindle: 95 mm Spindle: MT3 Speed: 95-2055 RPM Power: 230 V Machine height: 158 cm For more information call us or send an e-mail. more
5
Lathe feeder, Lathe lathe, 3 Lathe feeder -Futter size Ø 160 mm -TGL30-2312 Cuozrkd -Weight 11.2 kg more
6
Vehicle data - make: BT - type: SSE 160 D / 1706 STD / initial lifting / HH 1680 mm - type of drive: electric - load capacity: 1200 kg - load Centre of gravity:-lifting height: 1680 mm - range: 0 mm - year: 2008 - operating hours: 1706 - internal No.: 132 _____ Jfb0mr9 Mast data - mast type: standard - height: 1680 mm - height: 1340 mm - free lift: 0 mm - carriage: 0 mm - forks: 1140 x 175 x 60 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 134... more
3
Norgren pneumatic cylinder Ø 160 mm, stroke 60 mm, used, low wear, 100% functional, included with com. photos Ptzsy3 more
3
pressure:160 t throat:400 mm stroke:30 - 200 mm Nnxdb no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:600 mm table surface area:1000 x 770 mm table height over floor:810 mm hole in the table:360 mm Passage to the back:450 mm ram surface:710 x 450 mm ram adjustment:110 mm power requirement:15,0 kW weight:10,5 t Dimensions (WxDxH):1,7 x 2,0 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical ... more
3

Automatic Punching Press SCHULER A2-160

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6717 km
1995
used
pressure 160 t no of strokes Hub/min sheet width mm ----- PRESS DESIGN - drive system: eccentric / crank PRESS FORCES - total force (nominal) 160 to PRESS TABLE - table surface (left-right) 1300 mm - table surface (front-back) 1000 mm SLIDE - table surface (left-right) 1000 mm - table surface (front-back) 850 mm - stroke 30 mm SLIDE (MECHAN. PRESS) - slide adjustment 60 mm - stroke adjustment: no ... more
6
Drive motor BAUMÜLLER Main spindle motor DC- secondary motor servo motor BAUMÜLLER Type GNA 160 SV 2rif8m Series No. 89105372 Year of construction: factory overhaul in 2014 Rated power: 25 kW Operating voltage: 400 volts Rated current: 73 amperes Speed = 1350 to 4000 rpm. Excitation voltage: 260 to 200 volts Current: 2.3 to 0.56 amperes Swinging quality: S Tacho BAUMÜLLER type GHTS 42 Speedometer voltage: 20V / 1000 rpm Speedometer current: 10 mA max. 9000 rpm Shaft diameter: 48 mm Wave cone le... more
5
Two-jaw chuck, 2 jaw chucks, vise, face plate Colwbzk8 -Futter size Ø 160 mm -Hole circle 136 mm -Cone O 115 mm -Weight 11.9 kg more
6
Vehicle data - make: BT - type: SRE 160 L / / 3987 STD / initial lifting / HH 2640 mm new seat cushion - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 2640 mm - range: 0 mm - year: 2011 - operating hours: 3987 - intern e No.: 158 _ Mast data - mast type: duplex - lifting height: 2640 mm - height: 1990 mm - free lift: 1520 mm - carriage: 70 mm - forks: 1140 x 180 x 60 mm _ Msmi9 Dimensions - length: 0 mm - width: 0 mm - height: 1990 mm - weight: 19... more
6
Siemens 1GG5162-0GZ46-6HU7-Z Nebenschl.-motor, serial number according to the photo, used, strong signs of wear, 100% functional, included with com. photos caution: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Wub79rzr more
5

Pillar Drilling Machine HUVEMA HU 45 Industry

St. Ingbert, GermanyGermany dealership location
6494 km
2014
used
bore capacity in steel:Ø 40 mm throat:220 mm bore stroke:120 mm spindle turning speed range:105 - 1257 U/min Clqrepf spindle speed::8 spindle taper MT:4 vertical adjustment of table:715 mm table surface area:330 x 330 mm motor speeds::750 / 1500 U/min base plate surface area:360 x 400 mm total power requirement:1,1 / 1,8 kW weight of the machine ca.:0,3 t dimensions of the machine ca.:0,4 x 0,6 x 1,8 m Accessories: - Pole-changing motor - Spindle CW / CCW - 1 quick-action chuck 3 - 16 mm - M... more
15

Horizontal 4-axis CNC Machining Center (163) ENSHU

Kirchlengern, GermanyGermany dealership location
6457 km
used
Auction
Another 36 days
Horizontal 4-axis CNC machining center (163), manufacturer: ENSHU, type: JE80S, year of construction: 2004, serial number: unknown, read-out operating hours: 89,686, read-out spindle hours: 14,457, travel distances x/y/z = 800/800/800 mm, 4th axle, 60 tool changers, Tool type BT40, mounted suction system, chip conveyor, change pallet, control FANUC 18I-MB, with extensive additional equipment and steel plate tray Nn02l more
6
Drive motor BAUMÜLLER Main spindle motor DC- secondary motor servo motor BAUMÜLLER Type GNA 160 SV Series No. 819065 Year of construction: factory overhaul in 2010 Rated power: 1.8 to 25 kW Operating voltage: 80 to 400 volts Rated current: 73 amperes Speed = 100 to 4000 rpm. Excitation voltage: 260 to 54 volts Current: 2.5 to 0.6 amperes Swinging quality: S Tacho BAUMÜLLER type GHTS 42 Speedometer voltage: 20V / 1000 rpm Speedometer current: 10 mA max. 9000 rpm Shaft diameter: 48 mm Wave cone le... more
6
Vehicle data - make: Toyota - type: 8FBET16 EX protection - type of drive: electric - load capacity: 1600 kg - load Centre of gravity: 500 - lifting height: 4700 mm - range: 0 mm - year: 2010 - operating hours: 3785 - internal No.: 050219 _ _____ B9xzidl3 Mast data - mast type: triplex - lifting height: 4700 mm - height: 2150 mm - free lift: 1645 mm - carriage: 0 mm - forks: 1100 x 0 x 0 mm _ Dimensions - length: 1998 mm - width: 1050 mm - height: 2150 mm - weight: 2961 kg _ ... more
5
Siemens 1GL5116-0ZZ41-6HU7-Z shunt wound motor, serial number according to the photo, with fan 2CW6145-8 and speedometer TDP 0.09 T-3, used, normal wear, 100% functional caution: Please separately request costs for shipping and handling! ATTENTION: Please enquire for charges for packing and transport separately! Bfcy9xicvu more
3

Notching Press SCHULER N 16

Eislingen, GermanyGermany dealership location
6689 km
used
pressure:16 t throat:300 mm stroke:25 mm no. of strokes:200 - 1000 /min distance table/ram, max. stroke up, adjustment up:220 mm table surface area:480 x 280 mm ram surface:200 x 110 mm ram adjustment:25 mm diameter of blanks:- 1800 mm no. of flutes:16 - 460 H2llojd material thickness:- 2,0 mm power requirement: kW weight:5,6 t dimensions (WxDxH):1,3 x 2,7 x 2,4 m intermittent / stroke lifting + idle stroke:WITHOUT two-hand operation: control:Siemens S 7, yom 2000 more
7
. No. 16 series No. 5 Screen capture facility Bedixnzq0p Thread cutter more
14
A well maintained Linde L16 electric stacker from year 2010 is being sold. The device was checked by a dealer. Mast is triplex mast with full free lift. Load of the device is 1600kg. Device is equipped with 850mm forks for increased maneuverability. The device is in a very good condition and comes from the stock of a large group from the Munich area. No repair traffic. Hydraulic sealing. Battery 2010 with approx. 72% remaining capacity (C5 test) Drive wheels / rollers ok. Technical data: ... more
5

Gear Shaving Machine GLEASON HURTH ZS 160

Staufenberg, GermanyGermany dealership location
6532 km
2002
used
max. wheel diameter: mm Cgrld9fg gear width: mm max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more
1
Mittelhubkommissionierer Fabirkat: Linde Typ: T 16 Gvryv8 Baujahr: 1994 Nenn-Tragfähigkeit: 1600 kg Die im Bild zu sehende Rollenbahn ist nicht in dieser Lagern-Nr. enthalten. more
3
Siemens 1GG5162-0KX44-6HU1-Z shunt wound motor, pitch of holes: 250x250mm, Ø shaft: 55 mm, former main spindle drive from droop + clean machine, used, 100% functional caution: Please request costs for packaging and transport! > br > ATTENTION: please inquire for charges for packing and transport! Wuchqxns more
6
Exhibit Filter generation motor-driven, mobile, dust class "M", AWN 16, suction at right or left, to mount bar, height reduction for transport possible -Technical data- Hjovhmarm Mark: H3 / BGHM HO 143034, dust nozzle Ø: 1 x 140 / 160 mm, nominal volume flow: 1,450 m³/h, volume flow: 1.593 m³/h, Max vacuum: 2,200 PA, filter area: 9.5 m², residual dust content: < 0.1 mg / m ³, number bags: 1 piece, engine: 2,2 kW, dimensions (Lxwxh): 1.715 x 900 x 2,130 mm, weight: 324 kg, sound pressure leve... more
15

Horizontal 4-axis CNC Machining Center (164) ENSHU

Kirchlengern, GermanyGermany dealership location
6457 km
used
Auction
Another 35 days
Horizontal 4-axis CNC machining center (164), manufacturer: ENSHU, type: GE580H, built: 2016, serial number: MAMA 160051, Bfe3bpz7wu hours read: 21,755, read spindle hours: 8,954, travel paths x/y/z = 800/800/800 mm, 4th axle, 40-fold tool changer, max spindle speed 10,000 rpm, tool type: BT50, double pallet changer, fanUC 31I control, chip conveyor, Machine weight 15,000 kg, pruning suction system PLYMOVENT, with extensive additional equipment and steel plate tray more
5

ALU Trennstegbandsäge Huvema HU 101 BM

Nattheim, GermanyGermany dealership location
6725 km
used
schwenkbar und nach oben zu stellen für senkrechte und wagerechte Schnitte 220 V Motor Bmc8fx7o Lagerort: Nattheim more
1

Ring Roller HUVEMA ESR- 1300 x 1,5

Krefeld, GermanyGermany dealership location
6370 km
2008
used
1300 mm plate thickness 1,5 mm number of rolls 3 B7blwza0 1 400 V / 50 Hz total power requirement 0,75 kW weight of the machine ca. 420 Kg dimensions of the machine ca. 2,0 x 1,0 x 1,4 m Kw t with pre-bending more
6
Vehicle data -Brand: Jungheinrich -Type: TFG 316 - free lift -Drive type: LPG -Capacity: 1600kg -Load Centre of gravity: 500 -Height: 3300 mm -Range: 0 mm -Year of construction: 2012 -Operating hours: 2374 -Internal No.: WW-2560 _____ Mast data -Mast type: duplex -Height: 3300 mm -Height: 2145 mm -Free lift: 1490 mm -Carriage: 0 mm -Forks: 1150 x 0 x 0 mm _____... more
5
Gilbarco 30-1-016-2 distribution rack (standard), serial number according to the photo, used, normal wear, 100% functional, included with com. photos B0n7nh9s more
6
Vehicle data - brand: Yale - type: MS 16 Initalhub triplex - drive type: electric - load capacity: 1600 kg - load Centre of gravity: 600 - lifting height: 4300 mm - range: 0 mm - built: 2012 - operating hours: 390 - internal No.: MS16Ini _ _____ Mast data - mast type: triplex - lifting height: 4300 mm - height: 1950 mm - free lift: 1400 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ 2reqpa Dimensions - length: 0 mm - width: 0 mm - height: 1950 mm - weight: 1300 kg _ Bat... more
12
Hundegger mounting console little used, for walls 12 m X3.5 m incl. platform trolley,foil roller,2 trolley for nail bridge TYP Senco SN50XP. For self-decommissioning . Machine can be visited in full operation. Bfb7zzp3on more
5

Multi spindle automatic SCHÜTTE SE 16

Brügg, SwitzerlandSwitzerland dealership location
6605 km
ready for operation (used)
Technical data Bfduas3jik Number of spindles 6 Pass-through round material 18 mm Passage square material 12 mm Passage hexagonal material 14 mm Largest rod feed 120 mm Piece time within: of 1.25 seconds up to 41 seconds Spindle speeds: Number (levels) 45 of 400 rpm up to 5000 rpm Connection 50 Hz 3x 380 Volt Power 7.5 kW Machine weight approx. 4500 kg Dimensions Machine: Length 2700 mm Width 1100 mm Height 2200 mm Various accessorie... more
1

Thread-Cutting Machine HUVEMA AT12/II

Krefeld, GermanyGermany dealership location
6370 km
2018
used
thread dia. 12 mm threading length 20 mm turning speeds 400 U/min working area 500 - 1600 mm weight of the machine ca. 25 Kg dimensions of the machine ca. m Benydh8qhz • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, more
5
Hydraulic cylinder, support cylinder, hydraulic ram, plunger -Hydraulic cylinders -Diameter of the piston about 210 mm -Piston rod Ø 110 mm -Stroke 1600 mm Rlpw7lt7 -Intake piston rod Ø 100 mm -Ideal for the construction of a hydraulic press -universally applicable -1x cylinder available -Prize piece -Dimensions 2550/260 / H350 mm -Weight 1116 kg / piece more


huvema hu 16
daily

New machines via email!

Stay updated!

Browse through the most popular types of machines:

to

to

Edit search
HUVEMA HU 16
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.