Through drill

HOMAG DRILLTEQ V-200

Condition: used, Year of construction: 2018, machine/vehicle number: 0-250-82-8302, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, controller manufacturer: HOMAG powerTouch / PC86, HOMAG DRILLTEQ V-500 / BHX 200/D – Year of manufacture: 2018 Vertical CNC machining center for drilling and milling operations. Equipped with dowel feeder and tool changer magazine, as shown in the inspection photos. Machine number: 0-250-82-8302 Control system: powerTouch / PC86, as shown in the screenshot Software: woodWOP 7.1, as shown in the screenshot from 22.10.2026 Meter readings according to the screenshot from 22.10.2026: Csdpfxe Agxfrs Ap Dohd Main usage: 2,885.92 h Total operation time: 6,789.99 h Photos of the meter readings and software are part of the image gallery. Electrical connection: 400 Y / 230 V, 3 phases, 50 Hz; neutral conductor required Maximum operating current: 29 A Fuse rating: 35 A Control voltage: 24 V Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal will take place between December 8th and 18th, 2026, after coordinating a date. Price on request. Detailed spindle configuration, working areas, software/license scope, and delivery scope will be determined after consultation. Windows version still to be confirmed. Subject to change and errors.

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) Cjdpjiidm Nsfx Ap Dshd - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, workpiece length (max.): 2,800 mm, workpiece width (max.): 850 mm, number of slots in tool magazine: 13, actuation type: electric, total height: 1,895 mm, total length: 2,920 mm, total width: 1,890 mm, overall weight: 1,580 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The Drillteq V-200 is in continuous use, which means the number of parts being processed is increasing. The machine is in good condition and is regularly serviced. For more information, please call 601 548 875. Cjdpfxe Afm Ite Ap Dshd

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-8843, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine from HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Codpfszvx Ucex Ap Dshd Model: Drillteq V-200 / Optimat BHX055 Year of manufacture: 2022 Workpiece length (X): from 200mm to 2500mm Workpiece width (Y): from 70mm to 850mm Workpiece thickness (Z): from 12mm to 60mm Safe clamping system to protect delicate surfaces Power supply: 400V (3 phases), 50Hz

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi Codpjzx Ennefx Ap Dehd with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Chedpfx Aszvxz Asp Dod Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year: 2020 Workpiece length (X): 200mm to 2500mm Workpiece width (Y): 70mm to 850mm Workpiece thickness (Z): 12mm to 60mm Safe clamping system protects delicate panel surfaces Power supply: 400V (3 phases), 50Hz

Year of construction: 1982, condition: used, In Good Condition Cjdpfxjdq Ug Ie Ap Dohd

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Codpfxozku Rpe Ap Dshd Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC Chjdpfx Apsdx Axfe Ded • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Cjdpovxvc Hofx Ap Dohd Year 2007. Very good condition. Available immediately.