Used Loop Stitch for sale (699)

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Originates from a cleanroom manufacturing process, plastic granules. Industrial vacuum cleaner for compressible material. The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. • Reduces downtime through continuous cleaning • Compression and easy removal of the collected material • Dust removal from the work environment • Recycling of trimmings Kdodpfx Akjw D Upzspsu • Flexible due to different performance classes • Container sizes, maintenance-free • Simple monitoring • Unattended operation possible. Nilfisk industrial vacuum cleaner R104 V 4031600000 Article number: NILFISK-4031600000 R104 X Product number: 4031600006 The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop. Industrial vacuum cleaner for compressible material The industrial vacuum cleaners in the R series are designed to vacuum up and compress trimmings, cutting dust, and manufacturing waste of all kinds (plastics, paper fragments, or fabric scraps) in order to be able to return them to the recycling loop.

Condition: new, Year of construction: 2024, overall weight: 265 kg, empty load weight: 265 kg, operation weight: 265 kg, _____Basic equipment > Hydraulically driven single-chamber spreader with feed auger and spreading disc. > Spreader hopper and distributor made of stainless steel. > Dimensions (W x H x L): 1050 x 950 x 1800 mm. > Unladen weight approx. 265 kg. > Incl. tarpaulin cover. > Incl. manual operation. > Incl. rear extension. (Length determined by axle load calculation) Mounted spreader, A1201 B1050 H950 L1800 Carrier vehicle: Multihog MXC Batch/Serial number: 40941 Special equipment - Discharge welded - K-basis 2 control system, fixed wiring harness, microprocessor control in CAN-BUS technology. Regulation of all drives in a closed control loop (with feedback). Functions: - Adjust spreading width - Adjust spreading density - Beacon on/off - Work light on/off - Spreader operation/pause - Illuminated buttons and rotary controls - Data logging - Speed simulation - x2 button - Complete wiring incl. wiring harness separation - Terminal box for mounting outside the cabin Rear apron W 1500 x H 500 Yellow beacon Agitator shaft set - Improves functionality regarding bridging with damp, poor quality spreading material. Auger reversing - Allows reversing of auger direction at the press of a button on the unit in case the feed auger is blocked or jammed. Location: 54595 Prüm Kdsdpfx Akjw Ibbqopsu

Condition: used, Broschürenfertigung / Booklet Maker Duplo System 5000 Baujahr / Year 2008 - Serial-No. 080100007 Zähler / Counter 7,6 Falzungen-Heftungen Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator DC-10/60 - 2 x 10 Stations Feeder Format / Size min.120mm x 148mm - max. 350mm x 500mm Grammatur / Paper weight 40-300g/qm Stapelhöhe / Infeed height Station 60mm Geschwindigkeit / Speed max. 5.000 Product/h Broschürenfertigung / Booklet Maker DBM 500 Kdodpfx Ajxdfblokpju Heften-Falzen / Stitching-Folding Format / Size min. 120x170mm; max. 350x500mm 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Presswerk / Pressing Station DBM 500-P Frontschneider / Trimmer DBM 500T Auslageband / Delivery band DBM -LS Brücke Lifing unit LUL -HM Inklusive Kompressor / Include Compressor Rietschle Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Dürkopp Adler 867-290142-70M – Double Needle Long Arm – Direct Drive – 6 / 8 / 10 mm – Direct from Stock – €13,000 excl. VAT For sale: brand new Dürkopp Adler 867-290142-70M, available immediately from stock. ✔ New / unused ✔ Double-needle long arm – ideal for parallel stitching, bags, leather goods, and long round seams ✔ Available in 6 mm, 8 mm, and 10 mm stitch width ✔ Equipped with M-TYPE direct drive motor – quiet, powerful, and energy-efficient ✔ Triple transport (lower, upper, and needle feed) for perfect material guidance ✔ Professional German quality from Dürkopp Adler ✔ Ready for immediate use in workshops or production Limited-time offer – only valid until the end of April! Special price for quick sale: €13,000 excl. VAT First come, first served – available immediately For more information or to arrange a viewing, feel free to send a message. Keywords: industrial sewing machine for sale Kedpewi Iwpsfx Akpodu industrial sewing machine wholesale sewing machine supplier professional sewing machines industrial sewing machine used industrial sewing machine sewing machines for businesses

Condition: new, Year of construction: 2025, Dürkopp Adler 669-180112 – Cylinder Arm – Automatic Functions – Direct from Stock – €5,500 excl. VAT For sale: brand new Dürkopp Adler 669-180112, available immediately from stock. ✔ New / unused ✔ Cylinder arm – ideal for bags, shoes, sleeves, and round components ✔ Equipped with automatic functions: thread trimmer, presser foot lifter, and automatic start/stop stitching ✔ Single-needle or double-needle (depending on configuration, specify when inquiring) ✔ M-TYPE direct drive motor – quiet, powerful, and energy-efficient ✔ Triple transport (lower, upper, and needle feed) for perfect material guidance ✔ Premium German quality from Dürkopp Adler ✔ Ready for immediate use in workshops or production Limited-time offer – valid only until the end of April! Special price for quick sale: €5,500 excl. VAT Kdjdpfx Akswi I D Nspsu First come, first served – available immediately For more information or to arrange a viewing, feel free to send a message. Keywords: industrial sewing machine for sale industrial sewing machine wholesale sewing machine supplier professional sewing machines industrial sewing machine used industrial sewing machine sewing machines for businesses

Condition: ready for operation (used), Year of manufacture: 1988 / Overhauled in 2019 by HYDAC Accessoirs with a completely new control system Load capacity: 2,000 kg Table diameter: 1,500 mm Band width: max. 100 mm Band thickness: 0.3 – 1.0 mm Maximum coil height (incl. pallet): approx. 850 mm Number of pinch rollers: one pair Weight: approx. 2,200 kg Dimensions: approx. 2,600 x 2,100 x 1,700 mm Execution/features: • Sturdy welded frame construction • Coil hold-down plate • Large band deflection roller • Deflection roller and pinch rollers hydraulically height adjustable • Motor-driven pinch rollers with lateral band guide and roller cage • Deadman switch for safe band threading during setup operation at safe speed • Direction of operation (forward/reverse) selectable via hand switch • Continuously adjustable pulling force via potentiometer Kedpfx Asy Hlgpokpjdu • Loop control system • Free-standing control cabinets with operator panels

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09020018, input voltage: 230 V, pneumatic connection: 5.5 bar, Description: For sale is a VIBEMAC 3022 WB 406-1CS industrial waistband sewing machine, offered as a complete workstation. This Italian-built unit is specifically designed for high-precision waistband attachment and reinforced seam operations in denim, trousers, and workwear production. The machine produces strong and consistent chainstitch seams and is widely used in professional garment manufacturing environments. The unit has been in production use and was fully operational until factory shutdown. The machine has been video recorded in full working condition on 01.04.2026. VIBEMAC machines are known for their durability, precision, and long operational lifespan, making them a preferred choice in denim production. Key features: • Automatic waistband sewing system • Chainstitch seam for strong and flexible stitching • Suitable for heavy fabrics (denim, workwear) • Consistent seam quality and high repeatability • Designed for continuous industrial use • Integrated feeding system for stable material handling Includes: Kdodpfsy Ipnaex Akpeu • VIBEMAC 3022 WB 406-1CS sewing machine head • Integrated motor and drive system • Industrial worktable and steel stand • Foot pedal control • Thread stand and guides • Integrated control panel Technical details: • Manufacturer: VIBEMAC S.p.A., Italy • Model: 3022 WB 406-1CS • Year: 2009 • Stitch type: Chainstitch • Needle system: 62x57 F120 • Power: 220 / 380V Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (01.04.2026) • Recently serviced (27.02.2026) • Typical signs of use from production environment • Sold as-is, where-is, without warranty Typical applications: • Waistband attachment (jeans, trousers) • Reinforced seams • Heavy-duty garment production Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: excellent (used), functionality: fully functional, first registration: 10/2025, fuel type: diesel, color: orange, fuel: diesel, operating hours: 255 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, trailer coupling, HOLDER C55SC DEMO UNIT with the following features: Work Package 1 Front linkage, 3D, double-acting incl. safety hook CAT II / CAT I Top link slider and top link with passive tilt adjustment and vibration damping (accumulator) for front-mounted implements Active hydraulic tilt adjustment for tilt adjustment Electro-hydraulic implement relief Rest bracket required for drawbar, rear linkage Electro-hydraulic implement relief Rest bracket PTO shaft, mechanical, front 1000 rpm Flow control valve 1 Flow control valve, circuit 1, adjustable from 0-35 l/min Implement adjustment pump variable, line set to the front and rear return and leak oil line to the front and rear Hydraulic kit 2 - 1 multi-function joystick (large joystick) incl. direction switch and speed control - 3 double-acting control valves, 2 with floating position - 6 front quick couplings - 2 rear quick couplings, looped, connected to the front quick couplings via a T-piece Tire 31x13.5-15 Wide-track fender kit Comfort Package Kdodpfszd Dzdjx Akpsu Air conditioning, driver's seat with air suspension incl. seat heating, left armrest WORK LIGHTS, FRONT Cabin, center-mounted Overall height reduced by 40 mm Hydraulic tilting device 7-pin socket, front for implement lighting Reinforced wheel load equalization Manual central lubrication system Hydraulic tilting device for superstructure frame, incl. control valve Heated exterior mirrors with bracket + switch Hydraulic oil level warning system Work lights, rear Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Package 15 PP6715 – CS6715 Brinox LEP 11 – Pharma Chromatography and CIP System New – original packaging – Factory New Manufacturer: Brinox Model: LEP 11 Version: PP6715 with CIP System CS6715 Condition: New, unused, original packaging Description For sale is a high-quality pharmaceutical chromatography system Brinox LEP 11, consisting of the PP6715 control panel and the corresponding CS6715 CIP unit. The system is completely new, unused, and in the manufacturer's original condition. It was designed for industrial C1-INH chromatography and meets the highest GMP standards. Scope of Functions - Slurry transfer - Washing and elution processes - Transfer to pre-precipitation tanks - Gel disposal - Independent CIP loop Kdjdpfx Akjyl Rqpspju Technical Features - Product-contacting components in stainless steel 1.4435 - Electropolished, Ra ≤ 0.8 µm - FDA-compliant sealing systems - CIP/SIP-capable - Operating pressure up to 6 bar - Temperature range up to 95°C - Fully drainable piping CIP Skid CS6715 - Stainless steel frame - Centrifugal pump - Shell-and-tube heat exchanger - Temperature control of cleaning media - Adjustable feed pressure The system is in factory-new condition with zero operating hours.

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 E CNC milling machine direct from the manufacturer. F 150 E - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. Carousel tool changer with 16 tool positions All linear guides with stainless steel covers Automatic central lubrication Siemens main spindle motor Servo drive from SIEMENS in all axes (closed control loop) Chip conveyor in belt design ensures efficient chip removal Chip trolley Max. Spindle speed 10,000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Coolant system with 190 liter coolant tank Tools are changed automatically or at the touch of a button Solid, exact milling table, large dimensions and precise surface finish Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Thanks to its technology-specific features, the SINUMERIK 808D ADVANCED control is perfectly preconfigured for milling. Thanks to the hardware and software extensions, the SINUMERIK 808D ADVANCED also offers sufficient performance for simple milling functions in mold and tool making. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function; enables simple optimization for higher dynamic and accuracy requirements Absolute encoder / no reference run required Higher accuracy Travel distance: X=750mm Y=500mm Z=500mm Dimensions and weights Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling/milling capacity Cutter head size max. 80 mm End mill size max. 38 mm Kdodpfx Aoymdygekpeu Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 15 kW Horizontal milling table Length 900 mm Width 500 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 600 mm T-slots size 18 mm Number of T-slots 5 T-slot spacing 80 mm Load capacity max. 350 kg Accuracy Repeat accuracy ±0.005 mm Positioning accuracy ±0.01 mm

Condition: used, Siemens 6SC6600-4NU00 SIMODRIVE 660 CLOSED-LOOP CONTROL P.C.B The parts were removed from production facilities that were in operation until they were decommissioned. Kedpey S D Ddsfx Akpjdu Condition: used (functional)

Condition: new, power: 103 kW (140.04 HP), fuel type: diesel, empty load weight: 2,235 kg, maximum load weight: 1,265 kg, overall weight: 3,500 kg, tire size: 215/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.6 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,363 mm, loading space volume: 15 m³, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2026, front tire size: 215/75R16C, rear tire size: 215/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Fiat Ducato L5H2 panel van (now L4H2 in Series 9.2 / 10) high roof, 2.2MJ, 103kW/140hp, new vehicle in stock, immediately available. Latest model of Series 10 (9.2)! Syncom: 295.CG3.2. Paint: 549 white. MAXI version with 16-inch tires and large braking system. Towing capacity: 3,000kg. Cargo dimensions: 4,070 x 1,870 x 1,932 mm (l x w x h). Cargo volume: 15 m3. Gross vehicle weight: 3,500kg. 0TK Smart tachograph: digital tachograph (VDO DTCO 4.1). 025 air conditioning. C7D 7-inch infotainment system with touchscreen, Bluetooth, DAB+, Android Auto, Apple CarPlay. Navigation via Android Auto or Apple CarPlay. RS3 USB interface on the dashboard. C7C ´´PREMIUM CAB´´ package with comfort driver's seat – sprung seat. 0XW ´´Techno´´ dashboard. 320 steering wheel and gear lever in synthetic leather. 640 comfort driver's seat, hydraulically suspended with center armrest. 50E seat base trim. 316 rear view camera. 245 radio remote control on the steering wheel. NHR cruise control with speed limiter. 619 rear double doors, 260-degree opening. 049 steel bulkhead. 077 double leaf spring rear axle. 041 electrically adjustable and heated exterior mirrors. 508 rear parking sensors. 835 storage compartment in the roof. 2QC ´´Eat & Work´´ passenger double seat with eating and working function in the middle backrest. 132 comfort driver's seat with center armrest + lumbar support. 8RS seat cover, black with double stitching and padded headrest (interior color code 076). 500 driver airbag. 502 passenger airbag. 5F4 safety package: Electronic Stability Control: - side wind assist - trailer stability control - post-collision braking - rollover prevention - anti-slip regulation (ASR) - hydraulic brake assist (HBA) - hill-start assist - adaptive load control (LAC). Safety kit: - emergency brake assist (pedestrian and cyclist detection) - lane keeping assist - traffic sign recognition - driver drowsiness detection - intelligent speed assist. 5EM darkened headlights. 4DH 980 full-size spare wheel with on-board tools. 01P audible pedestrian warning system. Kdedpfxjzlam Ss Akpou

Condition: used, mileage: 10 km, power: 103 kW (140.04 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 2,235 kg, maximum load weight: 1,265 kg, overall weight: 3,500 kg, tire size: 215/75R16C, axle configuration: 4x2, wheelbase: 4,035 mm, next inspection (TÜV): 06/2028, CO₂ emissions: 166 g/km, fuel consumption (urban): 7.7 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.6 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total length: 6,363 mm, loading space volume: 15 m³, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2026, front tire size: 215/75R16C, rear tire size: 215/75R16C, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, electronic stability program (ESP), immobilizer system, low noise, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Fiat Ducato L5H2 panel van (now L4H2 in series 9.2 / 10) high-roof, 2.2MJ, 103kW/140 hp, new vehicle in stock, immediately available. Latest model of series 10 (9.2)! Syncom: 295.CG3.2 Paint: 549 white, MAXI version with 16-inch tires and large brake system. Towing capacity: 3,000 kg. Load compartment dimensions: 4,070 x 1,870 x 1,932 mm (l x w x h). Load volume: 15 m3. Gross vehicle weight: 3,500 kg. 0TK Smart Tachograph: Digital tachograph (VDO DTCO 4.1). 025 Air conditioning. C7D 7-inch infotainment system with touchscreen, Bluetooth, DAB+, Android Auto, Apple CarPlay. Navigation via Android Auto or Apple CarPlay. RS3 USB interface on the dashboard. C7C "PREMIUM CAB" package with comfort driver's seat - suspension seat. 0XW "Techno" dashboard. 320 Steering wheel and gear knob made of artificial leather. 640 Comfort driver's seat, hydraulically suspended, with center armrest. 50E Seat base trim. 316 Rear view camera. 245 Radio remote control on the steering wheel. NHR Cruise control with speed limiter. 619 Rear double doors, 260-degree opening. 049 Steel partition. 077 Double leaf spring rear axle. 041 Electrically adjustable and heated exterior mirrors. 508 Rear parking sensors. 835 Storage compartment in the roof. 2QC "Eat & Work" passenger double seat with eating and working function in the middle backrest. 132 Comfort driver's seat with center armrest + lumbar support. 8RS Seat cover, black with double stitching and padded headrest (interior color code 076). 500 Driver airbag. 502 Passenger airbag. 5F4 Safety package: Electronic Stability Control - Side wind assist - Trailer stability control - Post-collision braking - Rollover prevention - Anti-slip control (ASR) - Hydraulic brake assist (HBA) - Hill start assist - Adaptive load control (LAC). Safety kit: - Emergency braking assist (pedestrian and cyclist detection) - Lane keeping assist - Traffic sign recognition - Driver drowsiness detection - Intelligent speed assist. 5EM Headlights, darkened. 4DH 980 Full-size spare wheel with onboard tools. 01P Acoustic pedestrian protection system. Ksdpfxszlancj Akpsdu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, VEMAG DP10E, LPG 208, AH 204 | Industrial line for the production and portioning of processed meats (Vacuum filler, Portioning machine, Hanging machine) Manufacturer: VEMAG Maschinenbau GmbH Ksdpfx Aezlauiskpjdu Model / Type: - DP10E (Vacuum filler) - LPG 208 (Portioning machine / Twister) - AH 204 (Hanging machine) Serial number: - DP10E: 1570059 - LPG 208: 2080262 - AH 204: 2040460 Year of manufacture: 2011 Power supply: DP10E Vacuum filler: 400-460 V / 18 A / 3~50/60 Hz / power: 12 kW LPG 208 Portioning machine: 400-460 V / 3~50/60 Hz / power: 6 kW AH 204 Hanging machine: 400-460 V / 3.5 A / 3~50/60 Hz / power: 1.5 kW This professional, automated production line from VEMAG is a top-class technological solution designed for medium and large meat processing plants, butcher shops, and factories that produce processed meats on an industrial scale. The heart of the system is the reliable VEMAG DP10E vacuum filler, which is characterized by its high throughput and gentle handling of the raw material. It ensures precise filling of various consistencies, guaranteeing perfect consistency and eliminating air bubbles in the finished product. The second module – the advanced VEMAG LPG 208 Servo Length longitudinal twister and portioning machine – is responsible for extremely precise division of processed meats to the desired length and consistent weight. This system works seamlessly with natural, collagen, and cellulose casings, achieving high portioning speeds exceeding 2000 pieces per minute. The process is completed by the VEMAG AH 204 hanging machine. It takes the twisted portions of sausages or hot dogs and automatically places them on hooks, creating perfectly even loops ready for direct transport to smoking and cooking chambers. The use of servo drives in this module eliminates vibrations and ensures smooth, trouble-free product flow.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing Kedpfxszhub Ao Akpjdu - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 Kodpjzgw Ebofx Akpjdu • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Kedpfx Ajz Ru Iyekpjdu Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: A79N517901, input voltage: 230 V, travel distance X-axis: 450 mm, travel distance Y-axis: 360 mm, overall weight: 720 kg, total length: 3,040 mm, total width: 1,360 mm, total height: 1,750 mm, nominal power (apparent): 1 kVA, rotational speed (max.): 1,000 rpm, rotational speed (min.): 100 rpm, Brother BE-1206B-BC-PC Industrial 6-Head Embroidery Machine Professional 6-Head Commercial Embroidery System for High-Volume Production The Brother BE-1206B-BC-PC is a professional multi-head industrial embroidery machine designed for continuous commercial production of logos, workwear, uniforms, caps, promotional textiles, and fashion garments. Featuring six embroidery heads with twelve needles per head, the machine enables simultaneous embroidery of multiple garments while maintaining excellent productivity and consistent stitch quality. The machine has been used in professional garment manufacturing and is offered as part of the MASI JEANS factory liquidation. Technical Specifications • Manufacturer: Brother Industries, Ltd. Ksdozib Apspfx Akpedu • Model: BE-1206B-BC-PC • Machine Type: Multi-Head Industrial Embroidery Machine • Configuration: 6 Embroidery Heads • Needles: 12 Needles per Head • Total Needles: 72 • Maximum Embroidery Speed: Up to 1,000 stitches per minute • Embroidery Area: Approximately 360 × 450 mm per head • Stitch Length: Adjustable • Control System: Digital PC-Controlled Programming Interface • Automatic Thread Change: 12 Colors per Head • Automatic Thread Trimming • Heavy-Duty Industrial Frame • Integrated Production Table Key Features • Six-head simultaneous embroidery system • High-volume commercial production • Automatic 12-color thread change on each head • Automatic thread trimming • Digital pattern programming • Accurate stitch positioning • Suitable for flat garments and various embroidery applications • Heavy-duty industrial construction • Designed for continuous production environments • High productivity with consistent embroidery quality Includes • Brother BE-1206B-BC-PC embroidery machine • Integrated industrial table • Thread stand • Embroidery hoops as shown • Digital control interface • Industrial frame Applications • Corporate logo embroidery • Workwear and uniform production • Promotional textiles • Sportswear • Fashion apparel • Caps, jackets and bags • Contract embroidery production • High-volume embroidery workshops Condition • Used industrial condition • Previously used in professional garment production • 5 embroidery heads fully operational • 1 embroidery head requires repair and is currently not operational • Good overall mechanical condition • Normal cosmetic wear consistent with industrial use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the size, weight, and precision alignment of the machine. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: new, functionality: fully functional, Year of construction: 2026, KDP1000 Cabinet Sandblasting Machine The KDP1000 cabinet sandblasting machine is an advanced device designed for intensive operation in industrial environments such as the automotive industry, shipbuilding, aerospace, and professional service facilities. Ksdpfx Akex Dkx Nepjdu With an impressive 1000-liter tank capacity and an 850-liter working area, the machine allows processing of large components – from wheels and rims to housings and heavy structural elements. High-quality construction and reliable operation make the KDP1000 a professional metal sandblaster designed for the most demanding users. Main Advantages of the Machine Large 1000-liter working capacity – enables processing of large-size components. Dust-free operation thanks to sealed perimeter gaskets – protects the working environment and operator health. Closed-loop blasting system – reduces dust emissions in the workplace. Efficient DC15 cyclone dust extraction system included as standard – effectively removes abrasive particles. Compatibility with various abrasives – including corundum, glass beads, quartz sand, and emery. Easy abrasive replacement – thanks to the built-in drain located at the bottom of the tank. Complete equipment set – includes gloves, a manual blasting gun, fixed blasting gun, and blow-off gun. Construction and Technology The KDP1000 sandblasting cabinet has been designed for intensive industrial use. Its robust steel construction with powder coating ensures resistance to abrasion and environmental factors. The housing is easy to maintain, while the sealed working system minimizes dust and increases operating safety. The hose blasting system located at the bottom of the tank provides stable abrasive flow. The large working area and convenient access to the cabinet interior allow efficient handling of components and maximum utilization of the available workspace. Precision and Work Efficiency The operating pressure range of 4–8 BAR allows the blasting intensity to be adjusted according to the type and condition of the surface being treated. Thanks to the 230 V power supply and reliable pneumatic system, the KDP1000 cabinet sandblaster ensures highly repeatable surface treatment results. Built-in lighting and a wide viewing window provide full control over the cleaning process, even when working on hard-to-reach areas of components. Standard Equipment 2 integrated rubber protective gloves Manual sandblasting gun Fixed blasting gun installed inside the cabinet Blow-off gun 7 ceramic nozzles DC15 cyclone dust extraction system Technical Specifications – KDP1000 Cabinet Sandblaster Parameter Specification Operating pressure 4–8 BAR Tank capacity 1000 L Compatible abrasives Corundum, glass abrasive, sand Working area capacity 850 L Power supply 230 V, 50 Hz Weight 149 kg Internal cabinet dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm Overall dimensions 1270 × 1000 × 1800 mm Note: The KDP1000 sandblasting machine is supplied as a self-assembly version.

Condition: used, Year of construction: 2026, MP160 Cabinet Parts Washer The MP160 Cabinet Parts Washer is a modern cleaning system designed for intensive cleaning of industrial and automotive components in a closed-loop system, using high temperature and pressure. With an operating pressure of 5–8 bar and the ability to heat the cleaning solution up to 70°C, the machine effectively removes carbon deposits, oil, grease, and other stubborn contaminants, even from hard-to-reach areas and components with complex geometries. Key Features of the MP160 Operating pressure: 5–8 bar – ensures effective removal of stubborn contaminants from parts with complex shapes and intricate geometries. Heated cleaning solution up to 70°C – improves detergent performance and reduces cleaning time. Dual-function spray gun – allows operation with compressed air only or with a mixture of air and cleaning fluid, while also enabling efficient drying of cleaned components. User-friendly control panel – provides convenient operation with independent control of the power supply and heating system. Pressure gauge – allows continuous monitoring of operating pressure. Compact steel construction – designed for regular use in workshops, service centers, and industrial facilities. Kdedpfx Akjz Rwgxjpju Machine Construction The MP160 is built for intensive operation in workshop and industrial environments. Its compact dimensions of 770 × 600 × 1330 mm allow convenient placement next to the workstation while providing ample space for cleaning small and medium-sized components. The 8–14 L cleaning solution tank enables economical use of detergent. Adjustable leveling feet ensure stable positioning, while the integrated pressure gauge provides constant monitoring of operating pressure. Precision and Performance The MP160 is designed for thorough cleaning of components with complex structures, including turbochargers, valves, covers, housings, and hydraulic components. Its pressurized spray system directs the cleaning solution into narrow gaps, channels, recesses, and other difficult-to-access areas. After the cleaning cycle, components can be blown dry with compressed air, helping remove residual cleaning fluid and preparing parts for assembly, inspection, remanufacturing, or other service operations. Applications The MP160 Cabinet Parts Washer is ideal for: Mechanical workshops Component remanufacturing facilities Service and repair centers Tool rooms Maintenance departments Manufacturing plants It can be used for cleaning: Turbochargers Valves and valve bodies Covers and housings Engine and transmission components Hydraulic system components Industrial machine parts Workshop tools and equipment Components made of steel, cast iron, and other materials compatible with the selected cleaning agent Standard Equipment Dual-function spray gun for cleaning fluid application and compressed air blow-off Heated cleaning solution system Control panel Operating pressure gauge Adjustable leveling feet Technical Specifications Cabinet Capacity 160 L Maximum Detergent Temperature 70°C Cleaning Solution Tank Capacity 8–14 L Operating Pressure 5–8 bar Dimensions (W × D × H) 770 × 600 × 1330 mm Weight 47 kg ATTENTION!!! Customer return: the machine is new and complete, but the housing is damaged. No warranty or returns!

Condition: used, functionality: fully functional, Comafer Dinamic 250N briquetting machine with closed-loop oil cooling and cooler capacity: 100–250 kg/hour, depending on the material. Briquette diameter: 75 mm. Kedpfsz D A Ugex Akpsdu cylindrical housing (ø1200) with inspection door, additional ring (sleeve) ø1200 / h930, pressing force approx. 1100 kg/cm2. 2 cylinders. briquette cylinder ø 200 mm. pump motor (11 kW / 15 HP, 380 V, 50 Hz). Monobloc, self-centering, without fixing rods for the round die. Electrical control panel with PLC, automatic and manual cycle. Shut-down mechanism with open die and die pressure gauge. Digital thermostat for oil temperature control, level switch to prevent oil leakage. Closed-loop oil cooling system (air/oil). Closed-loop cooler for die cooling (580 mm x 550 mm x 908, weight 56 kg). threading head for the production of long briquettes, briquettes with uniform length, complies with CE standards dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg

Condition: used, Year of construction: 2007, Year: 2007 Condition: good, functional Configuration: DUPLO DBM-120 – Automatic Booklet Making Line - DUPLO DC-10/60 – 10-station collator. - DUPLO LUL-HM – Left-hand lifting and connecting module. - DUPLO DC-12JR – Vibrating jogger for paper alignment. - DUPLO DBM-120 – Automatic booklet maker for wire stitching and folding. Technical Specifications: - Maximum production speed - 2,400 booklets/hour - Maximum sheet size - 320 × 450 mm - Minimum sheet size - 200 × 200 mm - Minimum sheet size with accessories - 148 × 210 mm - Maximum booklet size - 320 × 225 mm - Maximum capacity - 25 sheets of 80 g/m² - Number of stitching heads - 2 - Stitching methods - Saddle stitching, side stitching and corner stitching - Folding without stitching - Yes - Program memory - 13 programs - Dimensions - 1,300 × 700 × 550 mm Functions: Kjdpfx Aoz R Uqcekpjdu - Automatic collating of individual sheets into sets. - Jogging, alignment and transportation of collated sets. - Wire stitching of booklets along the spine. - Folding of booklets to the final format. - Automated production of booklets, catalogues, manuals and other printed materials.

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. Heavy-duty coil slitting line designed for high precision cutting of steel coils with customizable thickness configurations up to 4 mm. TECHNICAL DETAILS Coil Thickness: 0.3 – 3 mm / up to 4 mm Coil Width: 300 – 1500 mm Coil Weight: up to 20 tons Slitting Speed: up to 100 m/min Slitting Accuracy: ±0.1 mm Minimum Slitting Width: min. 50 mm Material Type: CR, HR, Galvanized, Stainless Steel, PPGI, Cold Rolled Steel, Aluminum This coil slitting line is designed for high-precision slitting of steel coils with heavy-duty capacity and reliable performance. It is suitable for processing materials 3-4 mm thickness, up to 1500 mm width and coil weights up to 20 tons. Available with single or double loop pit configuration to optimize material flow, line speed and production efficiency. The system consists of fully integrated units including hydraulic decoiler, coil loading car, entry peeler, leveler, slitting head, scrap recoiler, tension system and hydraulic recoiler, ensuring continuous and stable production. The line is available in different configurations depending on production requirements: This flexible structure allows the system to be optimized based on material type, thickness and production needs. KEY FEATURES Heavy-duty design for 20-ton coils High precision slitting (±0.1 mm) Advanced slitting head with precise adjustment system Hydraulic and automated operation systems High-speed production (up to 100 m/min) Robust mechanical structure for long-term operation ADVANTAGES Short lead time compared to European manufacturers High efficiency and continuous production Reduced downtime Customizable configurations Reliable and user-friendly automation system APPLICATIONS Steel service centers Automotive industry Construction sector Metal processing facilities OPTIONAL EQUIPMENT Rotary turnstile system Coil handling and transfer systems Kdsdpfxsyy Ru Ej Akpeu Advanced automation solutions Custom-designed configurations *Images shown in this listing include reference installations of similar coil slitting lines (3 mm and 4 mm thickness ranges) successfully manufactured, delivered and commissioned in different countries. These projects demonstrate our proven experience in delivering reliable and high-performance slitting lines worldwide.

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Ksdpfxsk Abnvo Akpsdu Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: H8966378, power of the servo motor: 400 W, input voltage: 400 V, type of input current: three-phase, pneumatic connection: 6 bar, compressed air connection: 6 bar, Brother RH-9820-02 Electronic Buttonhole Sewing Machine – Complete Industrial Workstation For sale is a Brother industrial electronic buttonhole sewing machine, model RH-9820-02, y. 2009 offered as a complete workstation. This machine is designed for automated buttonhole sewing in professional garment production. It features an electronic programmable control system enabling consistent stitch quality, repeatable sewing operations and efficient industrial production. The programmable control panel allows adjustment of sewing parameters, cycle settings and operation modes depending on the production requirements. The machine has been used in a professional garment factory environment and was operational prior to factory shutdown. Its industrial construction supports precise and efficient buttonhole production in continuous factory use. Includes: • Brother RH-9820-02 buttonhole sewing machine • Brother RX9820 electronic control unit • Integrated motor • Industrial worktable with steel stand and wheels • Thread stand • Foot pedal control • Pneumatic system and air preparation unit • Integrated control electronics and operator panel Technical Details: • Manufacturer: Brother Industries, Ltd. • Model: RH-9820-02 • Type: Electronic buttonhole sewing machine • Control unit: Brother RX9820 • Power supply: 400V / 3-phase / 50–60 Hz • Programmable electronic control interface • Automatic sewing cycle functionality • Pneumatic system integrated • Made in Japan Kdodpfxsy Ahmks Akpju Key Features: • Automated buttonhole sewing operations • Consistent industrial stitch quality • Electronic programmable control system • High repeatability for production use • Integrated pneumatic components • Heavy-duty industrial construction • Factory-grade sewing workstation Condition: Used industrial condition. Operational prior to factory shutdown. Stored indoors. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications: • Buttonhole sewing • Shirts, trousers and jackets • Denim production • Workwear manufacturing • Industrial garment production • Textile manufacturing operations Location: Valga, Estonia Removal & Transport: Buyer responsible for dismantling and transport.