Used Stamping for sale (493)

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Lrodpsp H Swdsfx Adqji Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Lredpfx Aden Smg Tsqji Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Lsdpfsw Udy Nsx Adqsri Feel free to contact me for more information.

Year of construction: 1993, condition: used, machine/vehicle number: 24323, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles Ljdpfx Adsbnnwqeqeri punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: approx. 106 kg

Condition: used, machine/vehicle number: 4 06A1 0214/26236, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles Lrodpfx Adsbnnwfeqei recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: 108 kg

Condition: used, Year of construction: 2000, Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Ljdpfxeyv Nnpj Adqori machine weight ab. 11000 kg

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 5 standard slide units 1 narrow slide unit Lodperwnyvofx Adqori working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN Lsdpfotzlzasx Adqjri 4 standard slide units 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) Lrjded R Saqopfx Adqji • foil feeder with two pairs of foil feeding rollers • electric counter • delivery conveyor to the right

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Lrsdpfxjux Sfzs Adqji Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 4 pcs. Standard slide units Lodpfx Ajyn Rg Aedqori 1 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units Lrjdpjl D N Hvjfx Adqji 3 Standard slide units Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit Lsdpfxer D N Eqs Adqjri working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Lrodpodzqltofx Adqei Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram Lodpfx Adju Rwa Isqjri - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc Ledpfxei A A Tbe Adqori - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Ledetx E Rqepfx Adqori Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz Lsdpfxelb I Dzo Adqeri - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 tons good condition

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Ljdpjynuudsfx Adqeri

Condition: ready for operation (used), Year of construction: 1986, A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible. Lrsdoyr Rwpjpfx Adqji

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Lrodpfex I Nfrsx Adqji Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Lrodpfx Adsxmiqisqji

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Lsdpfxoyi Hpce Adqori Punching capacity 280 kN Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new Lrjdpjh N Di Defx Adqsi 4,76x45 mm. 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: used, Year of construction: 2001, functionality: fully functional, Technical Specifications Press capacity: 800 kN (80 tons) Stroke rate: 60 – 320 strokes per minute (SPM) Stroke adjustment: 8 – 80 mm Ram adjustment (shut height adjustment): 80 mm Table size: 830 × 700 mm Bolster plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed height over table: 120 mm Ram area: 500 × 400 mm Ram bore: Ø 50 × 90 mm Ram centering bore tolerance: 30 H7 mm Precision guided ram, multi-roller guidance system. Main motor power: 23 kW Drive system: Flywheel drive with planetary gearbox and pneumatic clutch/brake combination. Machine weight: approx. 8000 kg Gripper Feed Schaal SZV 3: Lrsdpfx Aeyidnyjdqoi Feed length: 4 – 150 mm Strip width: 10 – 270 mm Strip thickness: 0.1 – 4 mm We also have on stock Schaal SEP 80 with SWV3E 300 mm wide Servo Feeder. Unidor Control, Machine and Operator Safety. Full Technical Documentation in German including Parts list and Technical drawings.