Used Long Hole Drilling for sale (13,624)

Condition: used, Year of construction: 2005, devel device: Teilung 16, 22 25, 32 boring depht: 145 mm boring length: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 1500 / 3000 U/min hold down: manuell Klsdpfx Aow Dd N Reg Usl suction connection: 100 mm machine length: 1280 mm machine width: 960 mm weight: 300 kg

Condition: used, Year of construction: 1988, dowel hole drill device: division 16, 22 25, 32 max depth of the slot: 145 mm max length of the slot: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 2800 U/min Kljdpjqx Ig Ajfx Ag Usl suction connection: 100 mm machine length: 1280 mm machine width: 960 mm weight: 300 kg

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Klsdjihghrspfx Ag Uol

Condition: used, Year of construction: 2022, New demonstration machine! List price: €13,610.- 400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration with: Fully automatic electronic control with impulse operation via foot pedal for clamping-drilling-unclamping, automatic electrical return of the drilling unit once the set drilling depth has been reached, automatic adjustment for increased drill depth when end-faced drilling saves need to reset the depth for surface to edge drilling operations (+10 mm; e.g., for dowel length 35 mm, surface depth 14 mm and edge depth 24 mm). 1 drilling beam with 21 spindles, 32 mm center distance, 1.5 kW motor (drill feed 0-70 mm). Incl. 21 quick-change chucks (Ganner system) for easy bit exchange; multi-position swivel drilling unit from 0° to 90°, supported by gas spring. 1 clamp carrier, movable along the Y-axis with 3 pneumatic clamps, for workpiece height up to max. 80 mm. Comprehensive stop system includes: 1 1800 mm stop rail for shelf drilling (aluminum profile 40x40 mm) with 3 locator stops, quick-change system, easily switchable from right to left side for mirrored shelf drilling in cabinet construction; also usable for line boring in System 32. Limit stops and position settings as well as drilling height position over the support table with mechanical digital stop. Stops can be easily swung away for the quickest changeover from cabinet to frame and arm extensions for clamp carrier executed for line boring positions up to max. 300 mm. Ideal three-stage tool system. 1 set of dowel drills: 5 carbide dowel drills, Ø 8x77 mm, right; 4 carbide dowel drills, Ø 8x77 mm, left. Additional features: Extraction funnel, dust-tested, Ø 120 mm. Set for line boring in System 32 complete with: 2 guides with scale and adapter for position max. 300 mm, 2 pairs of locator cams for line boring for Y-position 37 mm and e.g. 300 mm, 1 base rail 1000 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 set of drills: 11 carbide line boring drills, Ø 5x57 mm, right; 10 carbide line boring drills, Ø 5x57 mm, left. Hydraulic brake cylinder. Clamping cylinder with holder, additional. Location: Klodpfjqw Ek Iox Ag Uol

Condition: refurbished (used), 2-spindle deep hole drilling machine under reconstruction Klsdpfx Agsx E U S Ej Ujl

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Technical specifications Drilling method : single-lip drilling Kledpefgwlbsfx Ag Ujl Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 420 mm Max. workpiece length 420 mm Manufacturer: TBT / SFT New electrics and new controls!

Condition: excellent (used), This machine was overhauled in 2025 and is therefore in like-new condition! Technical data: - Min. drilling diameter 16 mm - Max. drilling diameter 35 mm - counter boring 65 mm - Max. drilling depth 1,400 mm using BTA method - Required machine footprint approx. 6,100 x 3,100 mm - Max. machine height 2,400 mm - 2 separate drilling units, mounted on base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw and feed gearbox - Rapid traverse speed 4,000 mm/min - Feed speed max. 230 mm/min - Drive power per drilling spindle: 11 kW (2 pieces) - Infinitely variable speed up to max. 6,000 rpm - Hydraulically attachable tailstock with counter run - Tailstock manually movable on base plate with T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotating clamping bell holder, basic holder each - 2 pre-centering devices each - Drilling depth control via cams and limit switches Kedpfxowq I Iqj Ag Uoll - CNC control SFT and FU, connection 380 V / Rated current 80 Amp. - Each unit has its own control and own feed motor With this machine you actually receive 2 single-spindle machines, as each spindle is operated separately with its own control and feed motor.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, total length: 3,500 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 2,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,000 mm, table width: 680 mm, feed length W-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, DRILLING CAPACITY: - Twist drill diameter: max. 16 mm - Single-lip drill: 4–16 mm Kodpfx Agowxq E Ue Ujll - Thread cutting: max. M12

Year of construction: 1983, condition: used, machine/vehicle number: 508323, 21-spindle, pitch 32 mm Kedpfx Asdardxsg Uell tool holder M 10 external thread spindle distance max. 640 mm Gantry passage max. 1056 mm, stop length 2500 mm with 4 swiveling stops drilling unit with motor 2,2 kW drilling head swiveling, drilling from below height adjustment max. 80 mm drilling depth max. 80 mm, ex location Seevetal, as viewed, subject to prior sale

Condition: used, Year of construction: 2016, machine/vehicle number: M99955/3533513, Pipe Cutting Machine FZH VARIO 2 with 2.9m Magazine (Year 2016) Automatic pipe cutting line VARIO 2 by FZH Maschinenbau GmbH, manufactured in 2016. This line is designed for the cutting to length of round pipes and has been used in serial production of furniture fittings. The system comprises a magazine with singling system, feed unit, pipe cutting head, as well as extraction and deburring unit. Application areas: – Automatic cutting of round pipes in series production – Pipe diameter approx. Ø 6.0–78.0 mm – Wall thickness approx. 0.1–1.5 mm (plastics up to approx. 2.0 mm) – Cut lengths from approx. 70 mm, with typical lengths from 200–1,200 mm – Suitable for steel pipes (e.g., E195) and various other pipe materials Machine basic data (extract from manufacturer documentation): – Pipe diameter (outside): Ø 6.0 mm to 78.0 mm Kljdpfx Aox Hqd Tjg Ujl – Wall thickness: 0.1–1.5 mm (plastics up to 2.0 mm) – Cut lengths: 70–700 mm in one feed cycle, longer lengths by repositioning – Minimum cut length: 70 mm – Shortest scrap length: 150 mm – Pipe input: by the meter or from coil – Cycle time for cutting only: approx. 4 s (material dependent) – Feed time for 200 mm pipe length: approx. 2 s – Feed time for 500 mm pipe length: approx. 5 s – Feed time for 1,200 mm pipe length: approx. 16 s Condition / maintenance: – Well-maintained used condition from family business – System was regularly serviced – Technical documents (offer, layout drawing, specifications) available – Photos of the complete line including magazine and deburring unit available Inspection possible by appointment. Dismantling and loading can be organized in coordination with the buyer.

Year of construction: 2008, condition: ready for operation (used), A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible. Klodpfex Dcarex Ag Ujl

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm Klsdpfx Agoxyf E No Ujl • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank -pump Kodpfx Agjhuil Rs Uell -Filter

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm - Drilling depth 750 mm - Filter - Pump Klsdoxzz Hspfx Ag Uel

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Drilling depth 1000 mm Kjdpsdgpltefx Ag Uell Headstock Tank pump Filter

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -drilling diameter ~30 -drilling depth 750/extension ~1000 -Tank -Pumps -loading equipment -Tailstock Ksdpfsd Ri H Eox Ag Uell

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Kledpfxj Dcz Ds Ag Uol

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in a very good condition! Klodpfshwhx Hex Ag Ujl Deep hole drilling machine type TBM 120-2000 Drilling system BTA Drilling range full drilling 30-130 mm Max. boring 200 mm Max. drilling depth 2000 mm Drill spindle box with two-stage gear, electrically switchable. Optional rotating / stationary tool Main spindle box (tailstock) with two-stage gear, electrically switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck On request we will be happy to send you more pictures.

Year of construction: 1986, condition: used, - working length (mm): 3200 - drilling units: 3 from below with 3-spindle drilling head Klsdpfxj Drmxo Ag Uol - Hold down: 2 from above - pressure cylinder: 1 from the side - control: Siemens of newer construction

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles 1 full drilling 5-40 mm Ksdjd S Ualepfx Ag Uoll Drilling depth 1.000 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 79,000 h, functionality: fully functional, machine/vehicle number: 106648-11, Please provide your offer price. Sales only within Europe, including Turkey. Price excluding packaging; delivery condition: FCA (machine location). Available machines: 5 units, identical process. Kledpsxzgrasfx Ag Ujl Year of manufacture: 2001 - 2012 ===== For technical data, please refer to the handout. All warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals.

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Ksdpfxevcbg So Ag Usll Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Kledpfjvca Rcex Ag Ujl Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, center height: 1,040 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed (min): 50 rpm Spindle speed (max): 3,000 rpm Feed rate (Row 1): 18 – 160 mm/min Feed rate (Row 2): 35 – 320 mm/min Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm MACHINE DETAILS Dimensions (L x W x H): 6,500 x 3,500 x 2,900 mm Electrical data Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW EQUIPMENT Klodpfxexm S Ide Ag Usl 3-axis Heidenhain digital readout Coolant system

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, spindle speed (max.): 4,000 rpm, drill diameter: 16 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Feed travel X-axis: 600 mm Feed travel Y-axis: 300 mm Feed travel Z-axis: 600 mm Feed travel W-axis: 650 mm Spindle speed (max.): 4,000 rpm Drilling diameter, twist drill: max. 16 mm Single-lip drill: 4 to 16 mm Tapping: max. M12 Table length: 1,000 mm Table width: 680 mm MACHINE DETAILS Control model: HEIDENHAIN TNC 124 DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 1,500 x 2,100 mm Klodsxm S Hyjpfx Ag Usl Total weight: 2,000 kg