Used Long Hobler for sale (6,577)

Condition: used, Ref: MM6192 Safeline Signature metal detector with pneumatic push-arm reject system into a lockable bin. This unit is fitted with a full retail kit so meets all retail specifications. Model - Signature 30H. Serial number - 11410. Aperture dimensions - 360mm wide x 120mm high. Belt dimensions - 2000mm long x 300mm wide. Todpfex Emkyox Ac Tjb Electric supply - 3 phase.

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Tedehkz E Tjpfx Ac Teb Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Tedpfehk Dfkox Ac Tsb Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet Todpohk Dfrjfx Ac Tsb All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -

Condition: new, Year of construction: 2026, MBSM 150-20 Tjdpfehk Df Djx Ac Tjb For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Tjdpfx Acohp Rdle Tsb Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps   Tjdpfx Aol Hx Awsc Tsb

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Tedpfxol Hx Ibo Ac Tsb

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; Tjdpfx Aeqlck Noc Tsb The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Tedpfx Acou Agzxs Tsb Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Tjdpfx Ajcnw U Doc Tjb Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel Tsdpfx Aeu I Hr Uoc Tob - Operating hours: 725 hours

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data - Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) - Formats possible: 250 ml – 1,000 ml - Formats included: 330 ml and 500 ml long neck bottles - Bottle cap type: 26 mm crown caps - Execution: - Filler/capper: Modulblock 10/1-C - Labeler: LLAC-R-SQ (VAR STEP) - Additional features: - Hot foil stamper (added later) - CIP dummy bottles - Change parts for 330 ml format Tsdpexalibefx Ac Tob

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Tjdpfsymazgsx Ac Tjb Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. Specifications: Bowl Volume: 105.7 gal Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter

Condition: used, Year of construction: 2003, saw blade diameter 510 mm cutting diameter 150 mm capacity 90 degrees: flat 450 x 150 mm Tjdpfx Acjyrhure Tsb capacity 90 degrees: square 150 mm turning speeds 29 / 58 m/min. total power requirement 4,2 kW weight 1,55 t range L-W-H 1,8 x 1,7 x 1,7 mm Long-cut cold circular saw, semi-automatic - with miter adjustment left 50°, right 60° - digital cutting angle display - hydraulically adjustable feed speed - hydraulic workpiece clamping - 4 spare saw blades

Condition: excellent (used), Grunwald flexliner. 3-lane. For denesting trays and hot filling, with 3 x Smartdate X60 printers for film. Sealing 3 at a time. Exiting into single lane. Size of machine is approx. 8 m long x 1.7 m wide with external control panel 1.8 m x 350 mm. All s/s. With one set of tooling for round pot. Tjdpfx Aoxphqasc Tjb

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Tedpfxoxd Ubne Ac Teb Note 🗒️ No printer.

Condition: used, This listing is for a WPA Biochrom Biowave UV/Visible Spectrophotometer. Tsdpfx Aoxx Adyec Tob The unit is in full working condition and is ready for immediate release. The WPA Biochrom BioWave UV/Visible Spectrophotometer is a state-of-the-art analytical instrument designed for precise and efficient measurements across the UV and visible light spectrum, ranging from 190 to 900 nm. Engineered with advanced technology and user-friendly features, the BioWave is ideal for applications in molecular biology, biochemistry, and clinical laboratories. With pre-programmed methods for analyzing DNA, RNA, proteins, and cell density, it streamlines workflows and enhances productivity, making it an essential tool for researchers and laboratory technicians. Key Features: Wide Spectral Range: The BioWave spectrophotometer covers a wavelength range of 190 nm to 900 nm, allowing for comprehensive analysis of various biological samples. Pre-Programmed Methods: Equipped with built-in methods for DNA, RNA, protein assays, and cell density measurements, ensuring accurate and efficient results for nucleic acid purity checks. Low Sample Volume Capacity: Designed for minimal sample consumption, utilizing 10 µL minimum quartz cells, making it cost-effective and environmentally friendly. Innovative Optical Design: The unique optics used in the BioWave eliminates the need for a lid, facilitating easier sample handling and reducing contamination risks. High-Energy Xenon Light Source: The spectrophotometer features a high-energy xenon lamp that provides consistent illumination across the entire wavelength range, resulting in reliable and reproducible measurements. Long Lamp Life and Low Operating Costs: The combination of innovative optics and a durable light source ensures extended lamp life, contributing to reduced operational costs. Flexible Data Export: Easily export data to PC software or other sources for further analysis and reporting, enhancing data management capabilities. User-Friendly Interface: The instrument is equipped with simple software featuring large graphical displays, making data interpretation straightforward and efficient. Comprehensive Built-In Methods: Supports a wide array of assays including DNA, RNA, oligonucleotide calculations, protein assays, and direct UV measurements using methods like BCA, Biuret, Bradford, and Lowry. Warranty: Comes with a 2-year warranty on the spectrophotometer, and a 3-year warranty on the xenon light source for added peace of mind. Specifications: Model: WPA Biochrom BioWave UV/Visible Spectrophotometer Wavelength Range: 190 - 900 nm Minimum Sample Volume: 10 µL Light Source: High-energy xenon lamp Optical System: Split beam with novel optics (no lid required) Data Export: Compatible with various PC software Software: User-friendly with large graphical displays Built-in Methods: DNA, RNA, protein assays, direct UV measurement, BCA, Biuret, Bradford, Lowry

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Tsdpfjykn T Eox Ac Tjb Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: good (used), Year of construction: 2002, Bandsaw – Automatic Jaespa Compact 2 Year of manufacture: 2002 Internal machine no. 50 - High-performance bandsaw automatic, heavy-duty, hydraulic production bandsaw - Parallel sawing feed system in profile guide rails - Mitsubishi NC program control E1032 for preselection of 90 programs, each with a specific quantity and corresponding section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw spindle, 950 mm stroke, any desired section length from 3 mm to 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening on both sides - Material clamping with double clamping device in front of and behind the saw blade - Remaining piece length in automatic operation: 90 mm - Max. section length in automatic operation: unlimited Todpfeylwawjx Ac Tsb - Material support height 850 mm - Incl. 6 meter roller conveyor - Coolant tank 50 l

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1600x1500 mm Weight 540 kg Tedpsvz Hgnsfx Ac Tsb Total power requirement 3 kw

Condition: used, Year of construction: 1980, used, good conditionMake JohannsenType T82KYear of construction 1980MachineNo. 14262GS-testedmotor 5.5 kWbelt length approx. 7800 mm x 150 mmtable size approx. 2800 mm x 900 mmcrank right approx. 850 mmupper belt coverupper grinding supportright-left runsuction connection D 180 mmweight approx. 900 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Tjdpfxevwfdkj Ac Tob

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 Tjdpfxsvw I Nij Ac Tjb 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: used, Year of construction: 2012, Overview (H2) This CIMEC S1/2 ADH labeling machine was manufactured in 2012 and is designed for labeling long-neck bottles in the formats 33cl, 50cl and 27.5cl. The machine achieves an output of up to 2,500 bottles per hour and is already disassembled and available at short notice. Tsdpfx Acov Hcaho Tob Technical details (H3) - Output: 2,500 bottles/hour - Bottle formats: - 33cl longneck - 50cl longneck - 27.5cl longneck - Machine rotation: clockwise - Bottle holders: 6 plates - Labeling stations: 2 self-adhesive label dispensers - Power supply: 380V / 3-phase / 50 Hz - Power consumption: 2 kW - Machine weight: approx. 1,200 kg - Bottle sizes: - Height: 200-380 mm - Diameter: 50-120 mm - Label sizes: - Front label: width 50-240 mm, height max. 140 mm - Back label: width 50-140 mm, height max. 140 mm - Max. Paper feed height: 150 mm (optional 195 mm) - Max. Label width at maximum speed: 150 mm

Year of construction: 2002, condition: used, elv Bochum Todexr Uvnepfx Ac Tsb Network 24V= Magnet 12V