Used Long Moulder for sale (7,161)

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing Rsdpfx Aksy N S Dyoisch - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: like new (used), functionality: fully functional, W&P Kemper Superba Round and long moulding Rcodpjw Ulw Nofx Akioh Perfect moulding results due to variable adjustments Weight range: 500-1000g Capacity: up to 2000 pieces/hour Electrical supply: 380V, 16A, 50hz Completely refurbished

Condition: excellent (used), Used industrial moulding machine for traditional bread processing: round moulding and long moulding in one machine. Belt-type rounder and long moulder (Globus U), with 2 integrated flour dusters. Mobile on castors (easy to move in the bakery). Suitable for wheat dough as well as mixed doughs with rye content. Performance data: capacity of up to approx. 1,200 pieces/hour; dough piece weight: approx. 300–2,400 g. Dimensions: external measurements approx. 180 × 73 × 169 cm (W×D×H). Condition / Scope of delivery: Used machine, ready for operation (details/video/test upon arrangement). Additional accessories available. Inspection/trial run possible by appointment. Delivery available. Rjdpfx Akox Tflljisch

Condition: used, Koenig Rex Classic T4/3 bun roll machine 4-pocket SK58  weight range 35-85 grams capacity 6000 pcs/h setting device with long moulder Rcedpfez Hb Iwjx Akioh

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Rcodpfx Aexz Hh Uekieh Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: ready for operation (used), Year of construction: 2023, WP Miniroll compact roll line with high capacity and maximum flexibility. The Werner & Pfleiderer MiniRoll Roll Line is a highly compact and efficient solution for the production of premium-quality small bakery products. Thanks to the integrated Multimatic dividing technology and built-in drum round moulder, this line delivers consistent product quality, excellent hygiene and impressive output – all within a minimal footprint. year of build 2023 only 51 working hours! suited for the production of: • Long-rolled rolls • Round rolls Rcjdpex Thvmefx Akioh  5-row configuration with 600 mm working width Integrated Multimatic Pro G 2 dividing head, up to 150 gram Dividing range from 55 g to 150 g, measuring piston 55 mm Hourly capacity pieces/hour 3000 Built-in dividing and rolling head Motorized weight adjustment for consistent product results Manual pressure adjustment for precise shaping control Adjustable moulding belt and length-forming unit with pressure plate Resting time of 6 minutes Suitable for trays 600×400, 600×800 and 580×980 mm Integrated storage for up to 3 rolling drums Automatic cleaning positioning Router for remote access

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Rcsdpfx As Ad Igzokioh Table dimensions: 900 × 770 mm Additional work table: 1,000 × 300 mm Table height adjustment: 115 mm ROUTING HEAD Speed: 10,000–20,000 min⁻¹ Swivel range of routing head: 0–60° Spindle stroke: 135 mm Spindle diameter: 85 mm MACHINE DETAILS Manufacturer: SCM Type: R9 Year of manufacture: 1977 Machine type: Overhead router Dimensions (L × W × H): 1,650 × 1,250 × 2,000 mm Weight: 1,500 kg

Condition: used, total length: 1,000 mm, total width: 2,040 mm, total height: 1,710 mm, Year of manufacture: 1999 Colour: Grey Empty weight: 900 kg - Year: 1999 - CE marking present: Yes - Serial number: 126-02049 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 1990 - Table width [mm]: 850 - Max. tool diameter milling head [mm]: 180 - Feeding device present: Yes Rods Afy S Hopfx Akijch - Brand: Holz-her - Type: ET117 - Number of wheels [pcs]: 3 - Number of speeds: 8 - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 3000 - Max. spindle speed [rpm]: 10000 - Spindle speed control: Variable - Voltage [V]: 380 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 6.2 - Transport dimensions: 1000mm x 2040mm x 1710mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm. Rodo Agbi Djpfx Akiech

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Rcjdsz S Ufbepfx Akish Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 Rjdpfx Akj Afaugjioch in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Working width: max. 170 mm; planing head: 125 x 170 x 35 mm - Working height: max. 130 mm; planing head: 125 x 130 x 35 mm - 1st shaft: bottom, 3 kW - 2nd shaft: right, 3 kW - 3rd shaft: left, 4 kW Rjdpfx Ake Ad Rn Ioioch - 4th shaft: right, 4 kW - 5th shaft: top, 4 kW - Feed rate: infinitely variable from 5 to 40 m/min

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Rcodpozwp Uijfx Akioh Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 6,465 mm, total width: 600 mm, total height: 285 mm, load capacity per storage section: 1,200 kg, number of shelf rows: 96, We offer this fully functional KASTO UNIPORTAL 1.2 automated long material storage system, manufactured in 2001. It is in perfect working order. The long materials are stored in up to 96 cassettes, with a payload of 1.2 tons per cassette. Usable cassette dimensions: 600 x 285 x 6465 mm. Rjdpfx Akoz Hm Eboisch The system can be inspected on-site. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1973, Used Machine Year of Manufacture: 1973 Features and Technical Specifications - Table milling machine for profiling, grooving, and rebating with appropriate milling tools - Three speed settings to accommodate different tools and machining operations - Spindle speeds: approx. 2,500 / 4,500 / 6,000 rpm - Milling arbor diameter: 30 mm - Height adjustment of the milling spindle: approx. 70 mm - Milling stop ruler with fine adjustment for tool diameters up to 250 mm - Weight: approx. 385 kg - Caution: The machine does not have a motor brake! Redpfszy Dzvsx Akioch - Availability: available shortly

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 023-2932, spindle diameter: 50 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, number of spindles: 7, Spindle arrangement: right-left-right-left-top-top-bottom. Rcsdpfs Agw Tnjx Akijh

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good Rsdpfx Aougvxxekisch

Condition: used, Moulder IDC000075 Rjdpfx Akstwy T Roisch - manufacturer: Wadkin - model: GA 220 - 4 years ago made renovation

Condition: used, Year of construction: 1988, tilting spindle: Ja -5 bis 45° height adjustment: elektrisch tilting adjustment: elektrisch fence adjustment: manuell height indicator: digital tilting indicator: digital fence indicator: Scala spindle diameter: 30 mm speeds: 3000, 4500, 6000, 8000, 10000 motor power: 6 kW motor brake: Ja, automatisch sustion connection: 2 x 120mm machine length: 1200mm machine wide: 1400mm Rcodpfx Aozq Dc Iekijh weight: 1100kg

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation Rodpfeztwr Iex Akisch - Spindle: 30 mm #8503 Net price

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical specifications: * Manufacturer: Weinig, Germany * Model: Powermat 500 * Year of manufacture: presumably 2005 (final inspection 25.11.2005) * Machine type: Four-sided planer / profiling machine * Spindles: At least 6 tool positions identifiable * Spindle speed: 8,000 rpm (according to the label) * Control: Electronic Weinig control with color display * Workpiece feed: Automatic * Spindle adjustment: Partially motorized with digital position indicators * Extraction: Several extraction connections available Equipment: * Electronic control with color display * Program management for various planing and profiling operations * Digital position indicators * Several planing and profiling spindles * Automatic workpiece feed * Pneumatic pressure elements * Adjustable workpiece guides * Enclosed safety guard with viewing window * Infeed and outfeed area * Several extraction connections * Emergency stop switch Application areas: * Four-sided planing of solid wood * Production of window and door profiles * Manufacturing of frame timbers * Production of glass beads * Production of baseboards and decorative profiles * Series production of profiled timbers Inspection possible by appointment * Sale in its current condition Rodpfx Ae Aaw S Sjkioch * Dismantling and loading upon agreement * Transport by the buyer

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Mechanical counter Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Rcodpozdzbujfx Akijh Machine depth: 1200mm Weight: 580kg

Condition: used, Year of construction: 1981, Used Machine Year of manufacture: 1981 Features and Technical Specifications: - With 2-stage pneumatic lifting spindle - Mandrel diameter: 40 mm - With long table length: 2500 mm - With extendable frame support - With milling stop featuring Panhans metal stop jaws and fine adjustment - Machine must be inspected/overhauled. Basic functions are intact Availability: Immediately Location: Röllbach Rcjdszk N Dqjpfx Akieh

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Rcedpfx Akjzmukuoioh

Condition: excellent (used), functionality: fully functional, Wadkin GD 220 Moulder Planner Rjdpfx Akjzr I S Noijch